Supercritical fluid extraction of fungal oil using CO2, N2O, CHF3 and SF6
The DOI matches its Crossref record.
Abstract
The extraction of oil from fungi (Mortierella ramanniana var.angulispora) was studied using carbon dioxide (CO 2), nitrous oxide (N 2 O), trifluoromethane (CHF 3) and sulfur hexafluoride (SF 6) under supercritical conditions. The oil solubility was highest in SC‐N 2 O followed by SC‐CO 2, while both SC‐CHF 3 and SC‐SF 6 showed poorer solvent power. The recorded oil solubilities at 333 K and 24.5 MPa were 2.3 wt% in N 2 O, 0.48 wt% in CO 2, 0.0099 wt% in CHF 3 and 0.0012 wt% in SF 6. The oil solubilities in SC‐N 2 O and SC‐CO 2 were measured over the pressure range 15.7–29.4 MPa and at temperatures ranging from 313–353 K. N 2 O always showed greater solvent power than did CO 2 at the same temperature and pressure. The solvent power of a supercritical fluid increases with density at a given temperature, and increases with temperature at constant density. The change in neutral lipid composition of the extracted oil with the extraction ratio was measured. Free fatty acids or diglycerides were extracted more easily than triglycerides or sterol esters. The change in fatty acid composition was also measured. The proportion of γ‐linolenic acid in the extract remained constant throughout the extraction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Techniques and modeling of polyphenol extraction from food: A review
Sridhar, A., Ponnuchamy, M., Kumar, P. S., Kapoor, A., Vo, D.-V. N., & Prabhakar, S. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-021-01217-8 · Cited by 348
“2019), nitrous oxide and sulfur hexafluoride (Sakaki et al. 1990) were considered to be the most suitable for studies.”
BackgroundBiosynthesis and regulation of microbial polyunsaturated fatty acid production
Certik, M., & Shimizu, S. (1999) · Journal of Bioscience and Bioengineering · doi:10.1016/s1389-1723(99)80001-2 · Cited by 330
Production Strategies and Applications of Microbial Single Cell Oils
Ochsenreither, K., Glück, C., Stressler, T., Fischer, L., & Syldatk, C. (2016) · Frontiers in Microbiology · doi:10.3389/fmicb.2016.01539 · Cited by 311
Mendes, R. L., Reis, A. D., & Palavra, A. F. (2006) · Food Chemistry · doi:10.1016/j.foodchem.2005.07.019 · Cited by 154
Singh, S., Verma, D. K., Thakur, M., Tripathy, S., Patel, A. R., Shah, N., Utama, G. L., Srivastav, P. P., Benavente-Valdés, J. R., Chávez-González, M. L., et al. (2021) · Food Research International · doi:10.1016/j.foodres.2021.110746 · Cited by 98
Metadata
- Authors
- Sakaki, K., Yokochi, T., Suzuki, O., & Hakuta, T.
- Venue
- Journal of the American Oil Chemists' Society
- Publisher
- Wiley
- Published
- 1990-09
- Volume
- 67
- Issue
- 9
- Pages
- 553-557
- ISSN
- 0003-021X (ISSN-L)
- 1558-9331
- OpenAlex
- W2192341925
- Cited by
- 38
- References
- 0
- FWCI
- 1.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.