The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Recycling of gold from electronics: Cost-effective use through ‘Design for Recycling’
Open accessAbstract
With over 300 tonnes of gold used in electronics each year, end-of-life electronic equipment offers an important recycling potential for the secondary supply of gold. With gold concentrations reaching 300-350 g/t for mobile phone handsets and 200-250 g/t for computer circuit boards, this “urban mine” is significantly richer than what is available in primary ores. However, the “mineralogy” in scrap products is much different than in the conventional ores in a gold mine: Up to 60 different elements are closely interlinked in complex assemblies and sub-assemblies, and this requires specialised metallurgical processes with extensive offgas treatment to recover gold and a wide range of other metals cost effectively and in an environmentally sound way. Moreover, the logistics to “excavate” and “haul” the scrap products to the concentrator and further to the smelter are much more challenging than in the primary supply chain. Currently, only a small portion of old products is collected and directed into state-of-the art recycling chains. Significant improvements are needed here to fully utilise this secondary metal resource. The importance of the gold content of scrap electronics to the economics of recovery of gold and many other valuable metals is not always appreciated and this impacts on the “design for recycling” approach in selecting materials for new products, particularly in the European Union where the WEEE Directive aims to provide a closed loop economy. With a lower carbon footprint than primary-mined gold, recycled gold represents an important “green” source. The challenges faced in recycling electronic scrap to achieve a closed loop economy are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sepúlveda, A., Schluep, M., Renaud, F. G., Streicher, M., Kuehr, R., Hagelüken, C., & Gerecke, A. C. (2010) · Environmental Impact Assessment Review · doi:10.1016/j.eiar.2009.04.001 · Cited by 619
Self-citationAssessment of Precious Metal Flows During Preprocessing of Waste Electrical and Electronic Equipment
Chancerel, P., Meskers, C. E. M., Hagelüken, C., & Rotter, V. S. (2009) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2009.00171.x · Cited by 389
Self-citationComplex Life Cycles of Precious and Special Metals
Hagelüken, C., & Meskers, C. E. M. (2009) · The MIT Press eBooks · doi:10.7551/mitpress/9780262013581.003.0010 · Cited by 94
Self-citationINDIA: INCLUDING THE EXISTING INFORMAL SECTOR IN A CLEAN E-WASTE CHANNEL
Rochat, D., Rodrigues, W. F., & Gantenbein, A. (2008) · Cited by 30
Sander, K., & Schilling, S. (2010) · Cited by 18
Cited by
Reck, B. K., & Graedel, T. E. (2012) · Science · doi:10.1126/science.1217501 · Cited by 852
Ilankoon, I. M. S. K., Ghorbani, Y., Chong, M. N., Herath, G., Moyo, T., & Petersen, J. (2018) · Waste Management · doi:10.1016/j.wasman.2018.10.018 · Cited by 552
The Materials Science behind Sustainable Metals and Alloys
Raabe, D. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00799 · Cited by 526
Metal–organic framework technologies for water remediation: towards a sustainable ecosystem
Mon, M., Bruno, R., Ferrando-Soria, J., Armentano, D., & Pardo, E. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00264a · Cited by 480
Waste printed circuit board recycling techniques and product utilization
Hadi, P., Xu, M., Lin, C. S. K., Hui, C.-W., & McKay, G. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.09.032 · Cited by 332
Metadata
- Authors
- Hagelüken, C., & Corti, C. W.
- Venue
- Gold Bulletin
- Published
- 2010-09
- Volume
- 43
- Issue
- 3
- Pages
- 209-220
- ISSN
- 0017-1557 (ISSN-L)
- 2190-7579
- OpenAlex
- W1997009914
- Cited by
- 298
- References
- 5
- FWCI
- 13.18
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.