The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Towards circular economy implementation in manufacturing systems using a multi-method simulation approach to link design and business strategy
Open accessAbstract
The recent circular economy movement has raised awareness and interest about untapped environmental and economic potential in the manufacturing industry. One of the crucial aspects in the implementation of circular or closed-loop manufacturing approach is the design of circular products. While it is obvious that three post-use strategies, i.e., reuse, remanufacturing, and recycling, are highly relevant to achieve loop closure, it is enormously challenging to choose “the right” strategy (if at all) during the early design stage and especially at the single component level. One reason is that economic and environmental impacts of adapting these strategies are not explicit as they vary depending on the chosen business model and associated supply chains. In this scenario, decision support is essential to motivate adaptation of regenerative design strategies. The main purpose of this paper is to provide reliable decision support at the intersection of multiple lifecycle design and business models in the circular economy context to identify effects on cost and CO 2 emissions. The development of this work consists of a systematic method to quantify design effort for different circular design options through a multi-method simulation approach. The simulation model combines an agent-based product architecture and a discrete event closed-loop supply chain model. Feasibility of the model is tested using a case of a washing machine provided by Gorenje d.d. Firstly, design efforts for reuse, remanufacturing, and recycling are quantified. Secondly, cost and emissions of different design options are explored with different business model configurations. Finally, an optimization experiment is run to identify the most cost-effective combination of reused, remanufactured, and recycled components for a business model chosen on the basis of the explorative study results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Conceptual Framework for Circular Design
Moreno, M., De los Rios, C., Rowe, Z., & Charnley, F. (2016) · Sustainability · doi:10.3390/su8090937 · Cited by 564
Cited by
Conceptualizing the Circular Economy (Revisited): An Analysis of 221 Definitions
Kirchherr, J., Yang, N.-H. N., Schulze-Spüntrup, F., Heerink, M. J., & Hartley, K. (2023) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2023.107001 · Cited by 1,289
Corona, B., Shen, L., Reike, D., Rosales Carreón, J., & Worrell, E. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.104498 · Cited by 987
Circular supply chain management: a definition and structured literature review
Farooque, M., Zhang, A., Thürer, M., Qu, T., & Huisingh, D. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.303 · Cited by 894
Assessing relations between Circular Economy and Industry 4.0: a systematic literature review
Rosa, P., Sassanelli, C., Urbinati, A., Chiaroni, D., & Terzi, S. (2020) · International Journal of Production Research · doi:10.1080/00207543.2019.1680896 · Cited by 733
Industry 4.0 and the Circular Economy: A Literature Review and Recommendations for Future Research
Awan, U., Sroufe, R., & Shahbaz, M. (2021) · Business Strategy and the Environment · doi:10.1002/bse.2731 · Cited by 609
Metadata
- Authors
- Lieder, M., Asif, F. M. A., Rashid, A., Mihelič, A., & Kotnik, S.
- Venue
- The International Journal of Advanced Manufacturing Technology
- Published
- 2017-06-23
- Volume
- 93
- Issue
- 5-8
- Pages
- 1953-1970
- ISSN
- 0268-3768 (ISSN-L)
- 1433-3015
- OpenAlex
- W2633961695
- Cited by
- 163
- References
- 1
- FWCI
- 20.18
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Towards circular economy implementation in manufacturing systems using a multi-method simulation approach to link design and business strategy. https://app.cochat.ai/papers/10.1007/s00170-017-0610-9
- The paper
- Lieder, M., Asif, F. M. A., Rashid, A., Mihelič, A., & Kotnik, S. (2017). Towards circular economy implementation in manufacturing systems using a multi-method simulation approach to link design and business strategy. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-017-0610-9
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.