The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Assembly systems in Industry 4.0 era: a road map to understand Assembly 4.0
Open accessAbstract
The 4th industrial revolution (Industry 4.0, I4.0) is based upon the penetration of many new technologies to the industrial world. These technologies are posed to fundamentally change assembly lines around the world. Assembly systems transformed by I4.0 technology integration are referred to here as Assembly 4.0 (A4.0). While most I4.0 new technologies are known, and their integration into shop floors is ongoing or imminent, there is a gap between this knowledge and understanding the form and the impact of their full implementation in assembly systems. The path from the new technological abilities to improved productivity and profitability has not been well understood and has some missing parts. This paper strives to close a significant part of this gap by creating a road map to understand and explore the impact of typical I4.0 new technologies on A4.0 systems. In particular, the paper explores three impact levels: strategic, tactical, and operational. On the strategic level, we explore aspects related to the design of the product, process, and the assembly system. Additionally, the paper elaborates on likely changes in assembly design aspects, due to the flexibility and capabilities that these new technologies will bring. Strategic design also deals with planning and realizing the potential of interactions between sub-assembly lines, kitting lines, and the main assembly lines. On the tactical level, we explore the impact of policies and methodologies in planning assembly lines. Finally, on the operational level, we explore how these new capabilities may affect part routing and scheduling including cases of disruptions and machine failures. We qualitatively assess the impact on performance in terms of overall flow time and ability to handle a wide variety of end products. We point out the cases where clear performance improvement is expected due to the integration of the new technologies. We conclude by identifying research opportunities and challenges for advanced assembly systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Industry 4.0: A survey on technologies, applications and open research issues
Lu, Y. (2017) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2017.04.005 · Cited by 3,012
An introduction to MCMC for machine learning.
Andrieu, C., de Freitas, N., Doucet, A., & Jordan, M. I. (2003) · Machine Learning · doi:10.1023/a:1020281327116 · Cited by 2,451
A Maturity Model for Assessing Industry 4.0 Readiness and Maturity of Manufacturing Enterprises
Schumacher, A., Erol, S., & Sihn, W. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.07.040 · Cited by 1,766
Software-defined Cloud Manufacturing for Industry 4.0
Thames, L., & Schaefer, D. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.07.041 · Cited by 410
Cybersecurity for Industry 4.0: Analysis for Design and Manufacturing
(2017) · Springer Series in Advanced Manufacturing · doi:10.1007/978-3-319-50660-9 · Cited by 162 · cited 2×
“0 intensive connectivity (including IoT and the cyberphysical paradigm) brings with it also the cyber security challenges against the incessant activity of hackers and malware [73].”
BackgroundPlug-and-Simulate within Modular Assembly Line enabled by Digital Twins and the use of AutomationML
Um, J., Weyer, S., & Quint, F. (2017) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2017.08.2360 · Cited by 88
Cited by
Ahmed, I., Jeon, G., & Piccialli, F. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3146552 · Cited by 853
Digital Twin for maintenance: A literature review
Errandonea, I., Beltrán, S., & Arrizabalaga, S. (2020) · Computers in Industry · doi:10.1016/j.compind.2020.103316 · Cited by 741
Zheng, T., Ardolino, M., Bacchetti, A., & Perona, M. (2021) · International Journal of Production Research · doi:10.1080/00207543.2020.1824085 · Cited by 728
The four smarts of Industry 4.0: Evolution of ten years of research and future perspectives
Meindl, B., Ayala, N. F., Mendonça, J., & Frank, A. G. (2021) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2021.120784 · Cited by 368
Digital twin in smart manufacturing
Li, L., Lei, B., & Mao, C. (2022) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2021.100289 · Cited by 357
Metadata
- Authors
- Cohen, Y., Naseraldin, H., Chaudhuri, A., & Pilati, F.
- Venue
- The International Journal of Advanced Manufacturing Technology
- Published
- 2019-08-05
- Volume
- 105
- Issue
- 9
- Pages
- 4037-4054
- ISSN
- 0268-3768 (ISSN-L)
- 1433-3015
- OpenAlex
- W2965756258
- Cited by
- 198
- References
- 6
- FWCI
- 19.33
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Assembly systems in Industry 4.0 era: a road map to understand Assembly 4.0. https://app.cochat.ai/papers/10.1007/s00170-019-04203-1
- The paper
- Cohen, Y., Naseraldin, H., Chaudhuri, A., & Pilati, F. (2019). Assembly systems in Industry 4.0 era: a road map to understand Assembly 4.0. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-019-04203-1
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.