Effects of moisture content and temperature on acoustic velocity and dynamic MOE of radiata pine sapwood boards
Abstract
The effects of moisture content from 17 to 159% MC and temperatures from â71°C to +58°C on resonance-based acoustic velocity and dynamic modulus of elasticity (DMOE) were investigated using 36 boards of radiata pine sapwood. Acoustic velocity decreased with increasing moisture content and temperature, although effects differed noticeably below and above fibre saturation point (FSP). Below FSP, acoustic velocity decreased rapidly and linearly with increasing moisture; whereas above FSP changes in velocity were rather gradual and curvilinear with marked differences in velocity patterns between temperatures below and above freezing. Acoustic velocity decreased linearly with increasing temperature but there was an abrupt discontinuity at the freezing point for wood above FSP. Changes in moisture content and temperature affecting wood density and acoustic velocity led to changes in DMOE, although this relationship was not straightforward because changes of velocity with moisture were linear or curvilinear and depended on whether wood was frozen or unfrozen, whereas changes of density with moisture content were invariably linear. For practical work, it is important to estimate the relative effect of changing moisture content or temperature with respect to standard conditions on DMOE, thus general guidelines were devised to account for significant changes.
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The pattern of acoustic speed variation in logs submitted to a range of temperatures is: velocity remains rather constant for temperatures well below freezing, followed by a rapid decrease near zero degrees (approximately −5 to 5 °C) and a much slower decrease thereafter.
“The velocity remains rather constant for temperatures well below the freezing point, followed by a rapid decrease in the vicinity of zero degrees (approximately −5 to 5 °C) and a much slower decrease thereafter.”
From Using Acoustic Sensors to Improve the Efficiency of the Forest Value Chain in Canada: A Case Study with Laminated Veneer Lumber (2011) · cites this paper as [32]
Relative differences between logs tested at different temperatures remain almost constant.
“the same study shows that relative differences between logs tested at different temperatures remain almost constant.”
From Using Acoustic Sensors to Improve the Efficiency of the Forest Value Chain in Canada: A Case Study with Laminated Veneer Lumber (2011) · cites this paper as [32]
Moisture content of a log can vary according to tree characteristics, site and season, affecting effective log density and acoustic velocity.
“the moisture content of the log can vary according to tree characteristics, site and season [30,31], thus affecting the effective log density and, in turn, acoustic velocity [32].”
From Using Acoustic Sensors to Improve the Efficiency of the Forest Value Chain in Canada: A Case Study with Laminated Veneer Lumber (2011) · cites this paper as [32]
Cited by
Sorted by citations
Achim, A., Paradis, N., Carter, P., & Hernández, R. E. (2011) · Sensors · doi:10.3390/s110605716 · Cited by 24 · see citing works
“The pattern of acoustic speed variation in logs submitted to a range of temperatures has been described in the literature [32].”
Background
- Authors
- Moreno Chan, J., Walker, J. C., & Raymond, C. A.
- Affiliations
- University of Canterbury (NZ)
- Southern Cross University (AU)
- Venue
- Wood Science and Technology
- Published
- 2010-06-22
- Volume
- 45
- Issue
- 4
- Pages
- 609-626
- ISSN
- 0043-7719 (ISSN-L)
- 1432-5225
- OpenAlex
- W2027841210
- Cited by
- 67
- References
- 0
- Citations by year
- 2026: 2 · 2025: 10 · 2024: 2 · 2023: 3 · 2022: 4 · 2021: 5 · 2020: 7 · 2019: 6 · 2018: 4 · 2017: 7 · 2016: 3 · 2015: 2 · 2014: 4 · 2013: 3 · 2012: 2
- FWCI
- 6.30
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- Locations
- Wood Science and Technology (publishedVersion)
- Cross Connect (Southern Cross University) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
- Physical Sciences › Engineering › Building and Construction › Hygrothermal properties of building materials
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Bamboo properties and applications
- Keywords
- Pinus radiata, sapwood, sound velocity, dynamic modulus of elasticity, moisture content, temperature effects, fiber saturation point, wood density, resonance method, frozen wood, wood mechanical properties
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review