CoChat

Influence of processing time on nanoparticle generation during picosecond-pulsed fundamental and second harmonic laser ablation of metals in tetrahydrofuran

Open access

The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.

Abstract

The influence of fundamental and second harmonic wavelength on ablation efficiency and nanoparticle properties is studied during picosecond laser ablation of silver, zinc, and magnesium in polymer-doped tetrahydrofuran. Laser ablation in stationary liquid involves simultaneously the fabrication of nanoparticles by ablation of the target material and fragmentation of dispersed nanoparticles by post irradiation. The ratio in which the laser pulse energy contributes to these processes depends on laser wavelength and colloidal properties. For plasmon absorbers (silver), using the second harmonic wavelength leads to a decrease of the nanoparticle productivity over process time along with exponential decrease in particle diameter, while using the fundamental wavelength results in a constant ablation rate and linear decrease in particle diameter. For colloids made of materials without plasmon absorption (zinc, magnesium), laser scattering is the colloidal property that limits nanoparticle productivity by Mie-scattering of dispersed nanoparticle clusters.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1007/s00339-011-6398-9

Cites

32 of 32 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Effect of wavelength and material on nanoparticle productivity; cumulative ablated mass over processing time of silver ( a ), magnesium ( b ) and zinc ( c ) for ablation in THF using fundamental (1030 nm; 250 µJ) and second harmonic (515 nm; 125 µJ) laser wavelengths
Fig. 1 Effect of wavelength and material on nanoparticle productivity; cumulative ablated mass over processing time of silver ( a ), magnesium ( b ) and zinc ( c ) for ablation in THF using fundamental (1030 nm; 250 µJ) and second harmonic (515 nm; 125 µJ) laser wavelengthsCC-BY-NC · From the PDF
Fig. 2 Properties of colloids after laser ablation of silver in polyurethane-doped THF; primary particle diameter and STEM analysis of Ag-TPU nanocomposites made using the fundamental laser wavelength ( a ), optical spectra of Ag-THF/TPU colloids generated
Fig. 2 Properties of colloids after laser ablation of silver in polyurethane-doped THF; primary particle diameter and STEM analysis of Ag-TPU nanocomposites made using the fundamental laser wavelength ( a ), optical spectra of Ag-THF/TPU colloids generatedCC-BY-NC · From the PDF
Fig. 3 Properties of colloids after laser ablation of magnesium in polyurethane-doped THF; primary particle diameter and STEM analysis of MgO-TPU nanocomposites made using the fundamental laser wavelength ( a ), optical spectra of MgO-THF/TPU colloids generated
Fig. 3 Properties of colloids after laser ablation of magnesium in polyurethane-doped THF; primary particle diameter and STEM analysis of MgO-TPU nanocomposites made using the fundamental laser wavelength ( a ), optical spectra of MgO-THF/TPU colloids generatedCC-BY-NC · From the PDF
Fig. 4 Properties of colloids after laser ablation of zinc in polyurethane-doped THF; primary particle diameter and STEM analysis of ZnO-TPU nanocomposites made using the fundamental laser wavelength ( a ), optical spectra of ZnO-THF/TPU colloids generated
Fig. 4 Properties of colloids after laser ablation of zinc in polyurethane-doped THF; primary particle diameter and STEM analysis of ZnO-TPU nanocomposites made using the fundamental laser wavelength ( a ), optical spectra of ZnO-THF/TPU colloids generatedCC-BY-NC · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

2 more claims about this paper

Create a free account to see every claim other papers make about this one.

See all claims — free account

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 32 references

Research works printed but not linked: 3

  1. R. Kelly, A. Miotello, Appl. Surf. Sci. 205, 96 (1996)
  2. K. Patahk, A. Povitsky, J. Appl. Phys. 104, 113108 (2008)
  3. W.T. Nichols, T. Sasaki, N. Koshizaki, J. Appl. Phys. 100, 114912 (2006)

Cited by

See all 87

Metadata

Authors
Schwenke, A., Wagener, P., Nolte, S., & Barcikowski, S.
Affiliations
  • Laser Zentrum Hannover (DE)
  • Friedrich Schiller University Jena (DE)
Corresponding author
Barcikowski, Stephan
Venue
Applied Physics A
Published
2011-05-11
Volume
104
Issue
1
Pages
77-82
ISSN
  • 0947-8396 (ISSN-L)
  • 1432-0630
OpenAlex
W2041344570
Cited by
83
References
32
Citations by year
2026: 1 · 2025: 2 · 2024: 7 · 2023: 6 · 2022: 1 · 2021: 6 · 2020: 4 · 2019: 5 · 2018: 6 · 2017: 9 · 2016: 9 · 2015: 7 · 2014: 7 · 2013: 4 · 2012: 8
FWCI
3.79
Type
journal article
Language
en
Open access
Licence
cc-by-nc
Locations
Applied Physics A (publishedVersion, cc-by-nc)
Funders
  • Deutsche Forschungsgemeinschaft (SPP1327)
  • Bundesministerium für Bildung und Forschung
Topics
  • Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
  • Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Gold and Silver Nanoparticles Synthesis and Applications
Keywords
laser ablation in liquid, nanoparticle synthesis, picosecond pulses, tetrahydrofuran, silver nanoparticles, zinc nanoparticles, magnesium nanoparticles, plasmon absorption, Mie scattering, nanoparticle fragmentation, ablation efficiency, particle size distribution

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Influence of processing time on nanoparticle generation during picosecond-pulsed fundamental and second harmonic laser ablation of metals in tetrahydrofuran. https://app.cochat.ai/papers/10.1007/s00339-011-6398-9
The paper
Schwenke, A., Wagener, P., Nolte, S., & Barcikowski, S. (2011). Influence of processing time on nanoparticle generation during picosecond-pulsed fundamental and second harmonic laser ablation of metals in tetrahydrofuran. Applied Physics A. https://doi.org/10.1007/s00339-011-6398-9

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.