Cavitation during tensile deformation of isothermally crystallized polypropylene and high-density polyethylene
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The cavitation phenomenon was studied in isothermally and non-isothermally crystallized polypropylene and high-density polyethylene. It was found that nano-voids were not present in the crystallized samples, but were formed during their tensile deformation. The process of cavitation was initiated before reaching the yield point. The ellipsoidal voids were initially elongated perpendicularly to the deformation direction, but if the polymer (i.e., high-density polyethylene) was able to deform beyond the yield, then the reorientation of voids into the deformation direction was observed at local strains of 100-200 %. This behavior was similar to that observed previously in the samples crystallized without an exact control of solidification conditions. The calculations of Guinier's radius showed that voids in deformed polypropylene samples were characterized by the gyration radii of 28-50 nm. Smaller voids were observed in polyethylene. The scale of cavitation during deformation, studied on the example of polyethylene, depended on the preceding crystallization process and was most intensive for the specimens crystallized at the highest temperature of 125 °C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tensile Properties of Crystalline Polymers: Linear Polyethylene
Kennedy, M. A., Peacock, A. J., & Mandelkern, L. (1994) · Macromolecules · doi:10.1021/ma00097a009 · Cited by 293
Cited by
Cavitation during deformation of semicrystalline polymers
Pawlak, A., Galeski, A., & Rozanski, A. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.10.007 · Cited by 355
Self-citationYeh, I.-C., Andzelm, J. W., & Rutledge, G. C. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00697 · Cited by 146
Yeh, I.-C., Lenhart, J. L., Rutledge, G. C., & Andzelm, J. W. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b01748 · Cited by 84
Metadata
- Authors
- Pawlak, A.
- Venue
- Colloid and Polymer Science
- Published
- 2012-09-05
- Volume
- 291
- Issue
- 4
- Pages
- 773-787
- ISSN
- 0303-402X (ISSN-L)
- 1435-1536
- OpenAlex
- W2012803693
- Cited by
- 40
- References
- 1
- FWCI
- 2.26
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Cavitation during tensile deformation of isothermally crystallized polypropylene and high-density polyethylene. https://app.cochat.ai/papers/10.1007/s00396-012-2789-5
- The paper
- Pawlak, A. (2013). Cavitation during tensile deformation of isothermally crystallized polypropylene and high-density polyethylene. Colloid and Polymer Science. https://doi.org/10.1007/s00396-012-2789-5
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.