Evaluation of friction calculation methods for rolling bearings
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
In gearboxes, rolling bearing power losses often make up a large amount of the total gearbox power losses. Therefore, an exact calculation of rolling bearing power losses is very important for resource and energy efficient gearbox design. The state of the art offers numerous friction calculation methods with different levels of detail to calculate power losses of rolling bearings. Bearing manufacturers like SKF and Schaeffler offer popular bearing-based/global calculation methods for standard rolling bearings. Contact-based/local calculation methods can consider a wider application field by generalization of tribological relations, which enables its application to e.g. hybrid bearings or non-standard bearings. The different methods may yield widely differing results. For its validation, measurement results are required. In this study, a broad comparison of calculation results with substantial measurement results is shown. Based on the validation a classification of the calculation methods is derived, which provides guidance for the design engineer to choose the appropriate method for the respective application. Contact-based/local calculation methods have the potential to predict friction in rolling bearings precisely.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
![Fig. 1 Exemplary Sankey diagram of power loss in an industrial gearbox from [2]](https://figures.cochat.ai/paper-figures/35d89299ac2541a981247a7b91885e20/evaluation-of-friction-calculation-methods-for-rolling-bearings-figure-1.png)



Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“In order to, e.g. estimate friction in entire systems such as transmissions or drive trains, EHL modeling must be undertaken for every loaded contact [33,40,41].”
From Enhancing practical modeling: A neural network approach for locally-resolved prediction of elastohydrodynamic line contacts (2024) · cites this paper as [41]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Johnson, K. L. (1985) · Cambridge University Press eBooks · doi:10.1017/cbo9781139171731 · Cited by 7,796
Viscosity, Plasticity, and Diffusion as Examples of Absolute Reaction Rates
Eyring, H. (1936) · The Journal of Chemical Physics · doi:10.1063/1.1749836 · Cited by 3,218 · cited 1×
“For a surface element A of the discretized single contact, the total frictional force is written as: The fluid friction force F r,f is calculated from the shear stress τ based on the underlying rheology model [29, 30, 35] based on the Eyring molecular theory [36].”
MethodHolmberg, K., & Erdemir, A. (2019) · Tribology International · doi:10.1016/j.triboint.2019.03.024 · Cited by 677 · cited 1×
“1 Exemplary Sankey diagram of power loss in an industrial gear-box from [2] 1 Introduction Approximately 20% of the world’s total energy consumption is used to overcome frictional power losses in tribo-logical contacts [1].”
BackgroundShear behaviour of elastohydrodynamic oil films
Johnson, K. L., & Tevaarwerk, J. L. (1977) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1977.0129 · Cited by 515
Torque of tapered roller bearings
Zhou, R. S., & Hoeprich, M. R. (1991) · Journal of Tribology · doi:10.1115/1.2920664 · Cited by 127 · cited 2×
“Thermal effects on the lubricant film thickness are considered according to Zhou and Cheng [28].”
MethodThe Influence of Fluid Rheology on the Performance of Traction Drives
Tevaarwerk, J. L., & Johnson, K. L. (1979) · Journal of Lubrication Technology · doi:10.1115/1.3453346 · Cited by 104
Surface Topography and Fatigue Life of Rolling Contact Bearing
Zhou, R. S. (1993) · Tribology Transactions · doi:10.1080/10402009308983167 · Cited by 74 · cited 2×
“The LFP method considers non-Newtonian lubricant behaviour including a limiting shear stress and is essentially based on the work of Zhou and Hoeprich [26].”
BackgroundMethodA model for coulomb torque hysteresis in ball bearings
Todd, M. J., & Johnson, K. L. (1987) · International Journal of Mechanical Sciences · doi:10.1016/0020-7403(87)90116-0 · Cited by 48 · cited 2×
“With the calculated solid friction force F r,s and fluid friction force F r,f and the normal force distribution considering the material damping [21, 22], the frictional torque at each rolling element M r; WK ;i can be determined via torque equilibria.”
BackgroundMethodBestimmung des Verlustverhaltens und der Wärmebilanz von Wälzlagern
Jurkschat, T., Otto, M. K., Lohner, T., & Stahl, K. (2018) · Forschung im Ingenieurwesen · doi:10.1007/s10010-018-0266-0 · Cited by 15 · cited 1×
“However, experience from research and industry shows that the agreement with measurement results of the individual calculation methods varies greatly depending on the application [4].”
BackgroundSelf-citationAnders, J. M., Leslie, P., & Stacke, L.-E. (2013) · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · doi:10.1115/gt2013-95816 · Cited by 10 · cited 1×
“…Bearinx [37–39] (available as a simplified online version known as “Easy Friction” [40]) and CABA3D [41] from Schaeffler as well as SimPro [42], Bearing Select [43] and BEAST [44, 45] from SKF. Bearinx relies on a contact-based/local method for application modelling and bearing performance analysis.”
Method
Research works printed but not linked: 17
- SKF Group (2021) The SKF model for calculating the frictional moment, pp 17000-B5
- Schleich T (2013) Temperatur-und Verlustleistungsverhalten von Wälzlagern in Getrieben [Rolling bearings in transmis- sions-behaviour of temperature and power dissipation. Disser- tation, Technical University of Munich
- Palmgren A (1957) Neue Untersuchungen über Energieverluste in Wälzlagern [New studies on energy losses in rolling bearings. VDI Ber 2(0):117-121
- ISO (2018) Rolling bearings-Thermal speed rating-Calculation. ISO, vol 15312
- SKF Group (1994) Rolling bearings
- SKF Group (2004) Rolling bearings. PUB BU/P1 6000. EN 200(4):88-115
- Zander M, Kehl J-H (2020) FVA no. 701/III. Erweiterung LAGER2 -Erweiterung der Wälzlagerberechnung in FVA-Software [Exten- sion of bearing calculations in FVA-software]. FVA, vol 1404
- Hertter T, Weitl RM, Schleich T, Jurkschat T, Zander M (2020) LAGER2 4.2 -Programm zur Berechnung von Lagern -Be- nutzeranleitung [LAGER2 4.2-Program for calculation of bear- ings-User manual. FVA, Frankfurt am Main, Germany
- Gohar R (1988) Elastohydrodynamics. Ellis Horwood, Series in Mechanical Engineering, John Wiley & Sons Inc 24. Steinert T (1995) Das Reibmoment von Kugellagern mit bordge- führtem Käfig [The frictional torque of ball bearings with rib- guided cage. Dissertation, RWTH Aachen
- Steinert T (1995) Das Reibmoment von Kugellagern mit bordgeführtem Käfig [The frictional torque of ball bearings with rib-guided cage. Dissertation, RWTH Aachen
- Harris TA, Kotzalas MN (2007) Advanced Concepts of Bearing Technology, Rolling Bearing Analysis, Fifth Edition. CRC Press, Boca Raton, Florida
- Koryciak J (2007) Einfluss der Ölmenge auf das Reibmoment von Wälzlagern mit Linienberührung [Influence of the oil quantity on the frictional torque of rolling bearings with line contact. Disserta- tion, Ruhr-University Bochum
- Johnson K L (1993) Non-Newtonian Effects in Elastohydrody- namic Lubrication. Tribol Ser(25):15-26. https://doi.org/10.1016/ S0167-8922(08)70359-6 · DOI
- Koch O (2008) Dreidimensionale Simulation von kombiniert be- lasteten Radialzylinderrollenlagern [Three-dimensional simulation of radial cylindrical roller bearings subjected to combined loads. Dissertation, Ruhr-University Bochum
- Koch O, Bohnert C, Lösche T, Marneth B (2016) Prediction of rolling bearing friction-A valid method even for large size bearings?! Soc Tribol Lub Eng Annual Meeting and Exhibition, pp 511-513
- Lange N (2000) Hoch fresstragfähige Schneckengetriebe mit Rädern aus Sphäroguss [High scuffing load capacity worm gear units with spheroidal cast iron wheels. Dissertation, Technical University of Munich
- Leeuwen HJ, Schouten MJW (1995) Die Elastohydrodynamik: Geschichte und Neuentwicklungen [Elastohydrodynamics: history and new developments. Berichte, vol 1207. VDI
Cited by
Kelley, J., Schneider, V., Poll, G., & Marian, M. (2024) · Tribology International · doi:10.1016/j.triboint.2024.109988 · Cited by 20
A general kinematic model for lubricated ball bearings based on the minimum energy hypothesis
Alberdi, P., Arana, A., Oyanguren, A., Larrañaga, J., & Ulacia, I. (2024) · Tribology International · doi:10.1016/j.triboint.2024.109698 · Cited by 15
Deep groove ball bearing cage design using computational fluid dynamics
Park, J., Sadeghi, F., Lee, S., Lee, S., Arya, U., & Aamer, S. (2025) · Tribology International · doi:10.1016/j.triboint.2025.110775 · Cited by 9
Gosar, A., Klemenc, J., Nagode, M., & Oman, S. (2024) · Tribology International · doi:10.1016/j.triboint.2024.109800 · Cited by 7
Local Calculation of Load-Dependent Gear Power Losses of Cylindrical Gears
Paschold, C., Lohner, T., & Stahl, K. (2024) · Journal of Tribology · doi:10.1115/1.4067493 · Cited by 9
Self-citation
Metadata
- Authors
- Zander, M., Otto, M., Lohner, T., & Stahl, K.
- Affiliations
- Technical University of Munich (DE)
- Corresponding author
- Zander, M.
- Venue
- Forschung im Ingenieurwesen
- Published
- 2023-10-18
- Volume
- 87
- Issue
- 4
- Pages
- 1307-1316
- ISSN
- 0015-7899 (ISSN-L)
- 1434-0860
- OpenAlex
- W4387743382
- Cited by
- 35
- References
- 11
- Citations by year
- 2026: 12 · 2025: 17 · 2024: 6
- FWCI
- 3.44
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Forschung im Ingenieurwesen (publishedVersion, cc-by)
- mediaTUM – the media and publications repository of the Technical University Munich (Technical University Munich) (submittedVersion, other-oa)
- Funders
- Forschungsvereinigung Antriebstechnik e.V.
- Technische Universität München
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanics of Materials › Tribology and Wear Analysis
- Keywords
- rolling bearings, bearing friction, power losses, hybrid bearings, method validation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Evaluation of friction calculation methods for rolling bearings. https://app.cochat.ai/papers/10.1007/s10010-023-00715-1
- The paper
- Zander, M., Otto, M., Lohner, T., & Stahl, K. (2023). Evaluation of friction calculation methods for rolling bearings. Forschung im Ingenieurwesen. https://doi.org/10.1007/s10010-023-00715-1
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.