The DOI matches its Crossref record.
Intercalation vortices and related microstructural features in the friction-stir welding of dissimilar metals
Abstract
Dissimilar plates (0.6 cm thick) of copper and 6061 aluminum alloy; and 2024 aluminum alloy and 6061 aluminum alloy were friction-stir welded at various rotation speeds (400–1200 rpm) and traverse speeds of 1 to 3 mm/s, and produced variations of vortex and other swirl-like intercalations, especially near the weld- zone/work-piece interface. These vortex-like structures are composed of dynamically recrystallized, fine-grained intercalation microstructures which have been observed by optical metallography, scanning electron microscopy and transmission electron microscopy. They are similar to those characterizing mechanical alloying. Such micro-structures are especially fascinating because although they resemble vortex instabilities which occur in turbulent fluids, they are formed by extreme deformation in the solid state since centerline temperatures through the weld zone are about 420°C, or ∼0.7 TM in the 6061 aluminum system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Friction stir welding and processing
Mishra, R. S., & Ma, Z. Y. (2005) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2005.07.001 · Cited by 6,753
Friction stir welding and processing
(2008) · Choice Reviews Online · doi:10.5860/choice.46-0901 · Cited by 3,862
Recent advances in friction-stir welding – Process, weldment structure and properties
NANDAN, R., DEBROY, T., & BHADESHIA, H. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.05.001 · Cited by 2,098
Mehta, K. P., & Badheka, V. J. (2016) · Materials and Manufacturing Processes · doi:10.1080/10426914.2015.1025971 · Cited by 294
Interfacial reaction in steel–aluminum joints made by friction stir welding
Lee, W.-B., Schmuecker, M., Mercardo, U. A., Biallas, G., & Jung, S.-B. (2006) · Scripta Materialia · doi:10.1016/j.scriptamat.2006.04.028 · Cited by 272
Metadata
- Authors
- Murr, L. E., Li, Y., Flores, R. D., Trillo, E. A., & McClure, J. C.
- Venue
- Materials Research Innovations
- Publisher
- Informa UK Limited
- Published
- 1998-11
- Volume
- 2
- Issue
- 3
- Pages
- 150-163
- ISSN
- 1432-8917 (ISSN-L)
- 1433-075X
- OpenAlex
- W2060687772
- Cited by
- 191
- References
- 0
- FWCI
- 6.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Intercalation vortices and related microstructural features in the friction-stir welding of dissimilar metals. https://app.cochat.ai/papers/10.1007/s100190050078
- The paper
- Murr, L. E., Li, Y., Flores, R. D., Trillo, E. A., & McClure, J. C. (1998). Intercalation vortices and related microstructural features in the friction-stir welding of dissimilar metals. Materials Research Innovations. https://doi.org/10.1007/s100190050078
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.