‘Socializing’ sustainability: a critical review on current development status of social life cycle impact assessment method
The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In fact, defining the weights becomes important if aggregation and/or making composite indicators are the main focus of the analysis in order to allow decision-making (Traverso et al., 2012; Manik et al. 2013; Chhipi-Shrestha and Rehan Sadiq 2015; Telles do Carmo et al. 2016; Garrido et al. 2018; Ofori Agyekum et al. 2017).”
From A critical view on social performance assessment at company level: Social life cycle analysis of an algae case (2020) · cites this paper as Chhipi-Shrestha and Rehan Sadiq 2015
In the citing paper
“Moreover, there is no consensus among the SLCA community on appropriate weighting systems (Chhipi-Shrestha and Rehan Sadiq 2015).”
From A critical view on social performance assessment at company level: Social life cycle analysis of an algae case (2020) · cites this paper as Chhipi-Shrestha and Rehan Sadiq 2015
Citations
Cites
Klüppel, H.-J. (2005) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2005.03.001 · Cited by 4,639
Assessing the sustainability performances of industries
Labuschagne, C., Brent, A. C., & van Erck, R. P. G. (2005) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2003.10.007 · Cited by 1,051
Methodologies for social life cycle assessment
Jørgensen, A., Le Bocq, A., Nazarkina, L., & Hauschild, M. (2008) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2007.11.367 · Cited by 538 · cited 3×
“Among these three aspects of LCSA, S-LCA is newer and is the least developed (Klopffer 2003; Jørgensen et al. 2008; Macombe et al. 2013).”
BackgroundMethodThe guidelines for social life cycle assessment of products: just in time!
Benoît, C., Norris, G. A., Valdivia, S., Ciroth, A., Moberg, A., Bos, U., Prakash, S., Ugaya, C., & Beck, T. (2010) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-009-0147-8 · Cited by 492 · cited 6×
“2009), whereas the S-LCA was introduced in 1993 with the initiation of the Society of Environmental Toxicology and Chemistry (SETAC) Workshop (Benoı̂t et al. 2010). Therefore, S-LCA is relatively young as compared to LCA. S-LCA complements both E-LCA and LCC in terms of sustainability assessment (UNEP/SETAC 2009). S-L…”
BackgroundMethodInfluentialA Framework for Social Life Cycle Impact Assessment (10 pp)
Dreyer, L., Hauschild, M., & Schierbeck, J. (2006) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2005.08.223 · Cited by 488 · cited 6×
“…g at e) p h as es b u t ex cl u d es p ro d u ct u se s an d en d -o fli fe e G at e to g ra v e in cl u d es p ro d u ct io n g at e to d is p o sa l (e n d -o fli fe ) p h as es In one of the earlier works on S-LCA, Dreyer et al. (2006) proposed a conceptual S-LCA framework using ILO conventions.”
MethodInfluentialA review of multi-criteria decision-making methods for infrastructure management
Kabir, G., Sadiq, R., & Tesfamariam, S. (2014) · Structure and Infrastructure Engineering · doi:10.1080/15732479.2013.795978 · Cited by 437 · cited 1×
“Several researchers have used keywords for searching the literature for critical reviews (Jørgensen et al. 2008; Jørgensen 2012; Yi and Chan 2013; Kabir et al. 2013).”
Self-citationRe-thinking sustainability indicators: local perspectives of urban sustainability
Turcu, C. (2013) · Journal of Environmental Planning and Management · doi:10.1080/09640568.2012.698984 · Cited by 366 · cited 2×
“Introduction Sustainable development and sustainability are ideas that have been widely used since the 1980s in response to the negative impacts of development, policies, and strategies on the environment and society (UNEP/SETAC 2011; Turcu 2013; Fiksel et al. 2014).”
BackgroundCritical Review of Labor Productivity Research in Construction Journals
Yi, W., & Chan, A. P. C. (2014) · Journal of Management in Engineering · doi:10.1061/(asce)me.1943-5479.0000194 · Cited by 366 · cited 1×
“Several researchers have used keywords for searching the literature for critical reviews (Jørgensen et al. 2008; Jørgensen 2012; Yi and Chan 2013; Kabir et al. 2013).”
The Integration of Economic and Social Aspects in Life Cycle Impact Assessment
Weidema, B. P. (2006) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2006.04.016 · Cited by 333 · cited 3×
“On the other hand, Weidema (2006) proposed QALYs (Quality Adjusted Life Years) as a unit of impact measurement for human well-being analogous to DALYs (Disability Adjusted Life Years) being used as a measurement unit for damage to human health in environmental LCA.”
BackgroundMethodLife-Cycle based methods for sustainable product development
Klöpffer, W. (2003) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02978462 · Cited by 305 · cited 6×
“It has three components: environmental life cycle assessment (E-LCA), economic life cycle assessment (i.e. life cycle costing, LCC), and social life cycle assessment (S-LCA) (Klopffer 2003; UNEP/SETAC 2011).”
BackgroundMethodInfluentialBenoit-Norris, C., Cavan, D. A., & Norris, G. (2012) · Sustainability · doi:10.3390/su4091946 · Cited by 294 · cited 4×
“(iii) The present methodology of the SHI needs further improvement to make it more objective, and one alternative could be the inclusion of multi-criteria decision analysis in the SHI (Benoı̂t-Norris et al. 2012a, 2013).”
MethodInfluentialTowards a life cycle sustainability assessment: making informed choices on products
Ciroth, A., Finkbeiner, M., Traverso, M., Hildenbrand, J., Kloepffer, W., Mazijn, B., Prakash, S., Sonnemann, G., Valdivia, S., Ugaya, C. M. L., et al. (2011) · Cited by 272
Introducing the UNEP/SETAC methodological sheets for subcategories of social LCA
Benoît-Norris, C., Vickery-Niederman, G., Valdivia, S., Franze, J., Traverso, M., Ciroth, A., & Mazijn, B. (2011) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-011-0301-y · Cited by 265 · cited 2×
“indicators in five categories in March 2013 version (Benoı̂t-Norris et al. 2013). The five categories are labour rights and decent work; health and safety; human rights; governance; and community infrastructure. The social theme tables have a list of indicator data with risk levels low, medium, high and very high for…”
MethodBrent, A., & Labuschagne, C. (2006) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2006.01.233 · Cited by 255 · cited 6×
“Moreover, Labuschagne et al. (2005) and Labuschagne and Brent (2006, 2008) identified the social area of protection (AOP) as internal human resources, external population, macro social performance and stakeholder participation with each having several midpoint categories.”
BackgroundMethodInfluentialSocial Impacts in Product Life Cycles - Towards Life Cycle Attribute Assessment
Norris, G. A. (2006) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2006.04.017 · Cited by 232 · cited 1×
“At the endpoint level, Norris (2006) used a human health/human well-being impact category with two indicators: mortality and morbidity.”
MethodSocietal LCA Methodology and Case Study (12 pp)
Hunkeler, D. (2006) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2006.08.261 · Cited by 227 · cited 1×
“Hunkeler (2006) used an LCI database of E-LCA to compare the social impacts of two types of detergents.”
MethodSocial life cycle assessment of palm oil biodiesel: a case study in Jambi Province of Indonesia
Manik, Y., Leahy, J., & Halog, A. (2013) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-013-0581-5 · Cited by 209 · cited 1×
“Manik et al. (2013) used the gaps between stakeholders’ expectation and perception in impact assessment.”
MethodMacombe, C., Leskinen, P., Feschet, P., & Antikainen, R. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.03.026 · Cited by 184 · cited 2×
“Among these three aspects of LCSA, S-LCA is newer and is the least developed (Klopffer 2003; Jørgensen et al. 2008; Macombe et al. 2013).”
BackgroundFoolmaun, R. K., & Ramjeeawon, T. (2013) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0447-2 · Cited by 183 · cited 1×
“Foolmaun and Ramjeeawon (2013) measured company performance quantitatively and proposed a new scoring method to assess the impacts of the company on stakeholders (e.g. workers, society etc.) with respect to the selected subcategories (e.g. child labour).”
Potential hotspots identified by social LCA—part 1: a case study of a laptop computer
Ekener, E., & Finnveden, G. (2012) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0442-7 · Cited by 181 · cited 2×
“Ekener-Petersen and Finnveden (2013a) included the quantity of production (activity) in impact assessment 5 Refer to (Dreyer et al. 2010a, b) for detailed calculation steps. based on a laptop case study.”
BackgroundImpact assessment in SLCA: sorting the sLCIA methods according to their outcomes
Parent, J., Cucuzzella, C., & Revéret, J.-P. (2010) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-009-0146-9 · Cited by 176 · cited 8×
“These methods are included as Type 1 impact assessment by UNEP/SETAC Guidelines (Parent et al. 2010).”
BackgroundMethodInfluentialA comparison of cut roses from Ecuador and the Netherlands
Franze, J., & Ciroth, A. (2011) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-011-0266-x · Cited by 173 · cited 2×
“The resulting score for each stakeholder category was the average of the assigned values of its subcategories (Ciroth and Franze 2011).”
BackgroundTowards life cycle sustainability assessment: an implementation to photovoltaic modules
Traverso, M., Asdrubali, F., Francia, A., & Finkbeiner, M. (2012) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0433-8 · Cited by 172 · cited 1×
“Similarly, Traverso et al. (2012) assessed the social impacts of photovoltaic (PV) modules on the workers stakeholder category, considering discrimination, child labour, wages, working hours, social benefits, and health conditions as a part of LCSA.”
BackgroundCharacterisation of social impacts in LCA: Part 1: Development of indicators for labour rights
Dreyer, L. C., Hauschild, M. Z., & Schierbeck, J. (2010) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-009-0148-7 · Cited by 170 · cited 6×
“Ekener-Petersen and Finnveden (2013a) included the quantity of production (activity) in impact assessment 5 Refer to (Dreyer et al. 2010a, b) for detailed calculation steps. based on a laptop case study.”
BackgroundMethodInfluentialMetrics for supply chain sustainability
Clift, R. (2003) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-003-0220-0 · Cited by 170 · cited 5×
“(i) The social dimension of sustainability is difficult to measure (Clift 2003).”
BackgroundMethodInfluentialJørgensen, A. (2012) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0517-5 · Cited by 169 · cited 3×
“Jørgensen (2012) argues that S-LCA should support decision making that improves social impacts in a product’s life and should give alternatives.”
BackgroundMethodLehmann, A., Zschieschang, E., Traverso, M., Finkbeiner, M., & Schebek, L. (2013) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-013-0594-0 · Cited by 167 · cited 2×
“Lehmann et al. (2013) also used the SHDB for identifying social risks in assessing the social aspects of sustainability assessment of two technologies: water supply and wastewater treatment in Indonesia and a design option for new technology of fuel production (microreactor).”
BackgroundMethodPerformance indicators for small- and medium-sized water supply systems: a review
Haider, H., Sadiq, R., & Tesfamariam, S. (2014) · Environmental Reviews · doi:10.1139/er-2013-0013 · Cited by 157
Self-citationAssessing social impacts in a life cycle perspective—Lessons learned
Hauschild, M. Z., Dreyer, L. C., & Jørgensen, A. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.03.002 · Cited by 152 · cited 1×
“In S-LCA, the Area of Protection (AOP) is human dignity and well-being (Hauschild et al. 2008).”
BackgroundLife cycle sustainability assessment of electricity options for the UK
Stamford, L., & Azapagic, A. (2012) · International Journal of Energy Research · doi:10.1002/er.2962 · Cited by 135 · cited 2×
“Moreover, as mentioned in the previous section, Stamford and Azapagic (2012) also assessed some social 6 Uniform System for the Evaluation of Substances Adapted for LCA Purposes (USE-LCA). impacts of electricity options for the UK using E-LCIA results particularly for human toxicity, total human…”
BackgroundMethodA conceptual framework for impact assessment within SLCA
Reitinger, C., Dumke, M., Barosevcic, M., & Hillerbrand, R. (2011) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-011-0265-y · Cited by 129 · cited 1×
“More specifically, the AOP is autonomy, well-being-freedom, and fairness based on a capability approach (Reitinger et al. 2011).”
BackgroundSocial impact assessment in LCA using the Preston pathway
Feschet, P., Macombe, C., Garrabé, M., Loeillet, D., Saez, A. R., & Benhmad, F. (2012) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0490-z · Cited by 119 · cited 5×
“On the other hand, Feschet et al. (2012) and Weidema (2006) proposed methods of modelling impact pathways quantitatively; however, their application has limited use and requires further development.”
BackgroundMethodInfluentialFeasibility Study: Integration of social aspects into LCA
Grießhammer, R., Benoît, C., Dreyer, L. C., Flysjö, A., Manhart, A., Mazijn, B., Methot, A.-L., & Weidema, B. P. (2006) · Ghent University Academic Bibliography (Ghent University) · Cited by 104
Norris, C., Norris, G., & Aulisio, D. (2014) · Sustainability · doi:10.3390/su6106973 · Cited by 100
Development of a social impact assessment methodology for recycling systems in low-income countries
Aparcana, S., & Salhofer, S. P. (2013) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-013-0546-8 · Cited by 98 · cited 2×
“(Aparcana and Salhofer 2013a, b) used a yes/no type of response for scoring in order to assess social impacts of waste recycling systems.”
MethodInfluentialLabuschagne, C., & Brent, A. C. (2006) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2006.07.028 · Cited by 94 · cited 2×
“Moreover, Labuschagne et al. (2005) and Labuschagne and Brent (2006, 2008) identified the social area of protection (AOP) as internal human resources, external population, macro social performance and stakeholder participation with each having several midpoint categories.”
BackgroundResultMenikpura, S. N. M., Gheewala, S. H., & Bonnet, S. (2012) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x12444896 · Cited by 92 · cited 1×
“In another example, Menikpura et al. (2012) used the results of E-LCIA to assess the social dimension of the sustainability of municipal solid waste management systems in Thailand.”
MethodAparcana, S., & Salhofer, S. (2013) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-013-0559-3 · Cited by 88 · cited 1×
“(Aparcana and Salhofer 2013a, b) used a yes/no type of response for scoring in order to assess social impacts of waste recycling systems.”
MethodThe triple value model: a systems approach to sustainable solutions
Fiksel, J. R., Bruins, R., Gatchett, A. M., Gilliland, A. B., & ten Brink, M. R. B. (2013) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-013-0696-1 · Cited by 87 · cited 2×
“Introduction Sustainable development and sustainability are ideas that have been widely used since the 1980s in response to the negative impacts of development, policies, and strategies on the environment and society (UNEP/SETAC 2011; Turcu 2013; Fiksel et al. 2014).”
BackgroundBaumann, H., Arvidsson, R., Tong, H., & Wang, Y. (2013) · Journal of Industrial Ecology · doi:10.1111/jiec.12016 · Cited by 72 · cited 3×
“These issues are highly ideological and ambiguous and may be interpreted differently depending on political, ethical, and cultural backgrounds (Baumann et al. 2013).”
BackgroundMethodInfluentialPotential hotspots identified by social LCA–Part 2: Reflections on a study of a complex product
Ekener, E., & Moberg, Å. (2012) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0443-6 · Cited by 68 · cited 9×
“On the other hand, Feschet et al. (2012) and Weidema (2006) proposed methods of modelling impact pathways quantitatively; however, their application has limited use and requires further development.”
BackgroundMethodInfluentialCharacterisation of social impacts in LCA. Part 2: implementation in six company case studies
Dreyer, L. C., Hauschild, M. Z., & Schierbeck, J. (2010) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-010-0159-4 · Cited by 67 · cited 7×
“Ekener-Petersen and Finnveden (2013a) included the quantity of production (activity) in impact assessment 5 Refer to (Dreyer et al. 2010a, b) for detailed calculation steps. based on a laptop case study.”
BackgroundMethodInfluentialDesigning the social life cycle of products from the systematic competitive model
Lagarde, V., & Macombe, C. (2012) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0448-1 · Cited by 66 · cited 2×
“In addition, there are other phenomena such as market competition associated with products, which may produce different social impacts besides those that may result from the conventional S-LCA method (Lagarde and Macombe 2013).”
BackgroundMethodMethodology for the sustainability assessment of marine technologies
Basurko, O. C., & Mesbahi, E. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.01.022 · Cited by 61 · cited 5×
“In another study, Basurko and Mesbahi (2012) considered health and safety as the social AOP and have proposed a newer methodology for impact assessment using a water treatment system as a case study.”
MethodInfluentialMoriizumi, Y., Matsui, N., & HONDO, H. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.07.017 · Cited by 58 · cited 2×
“For instance, Moriizumi et al. (2010) assessed the social dimension of the sustainability of mangroves planted on wastelands in Thailand as a part of LCSA considering a complete biological lifecycle of a mangrove from seed collection to mangrove use phase.”
BackgroundThe use of life cycle tools to support decision making for sustainable nanotechnologies
Meyer, D. E., & Upadhyayula, V. K. K. (2013) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-013-0686-3 · Cited by 50
Environmental impact assessment of an automotive component using eco-indicator and CML methodologies
Vinodh, S., Kandasamy, J., & Joy, D. (2011) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-011-0405-x · Cited by 47 · cited 3×
“Sustainability has three main pillars, namely environment, economic and social (Valdivia et al. 2011), which are referred to as the triplebottom-line (TBL) (Sikdar 2007; Vinodh et al. 2012).”
BackgroundSustainability and recycle–reuse in process systems
Sikdar, S. K. (2007) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-007-0087-6 · Cited by 40 · cited 3×
“Sustainability has three main pillars, namely environment, economic and social (Valdivia et al. 2011), which are referred to as the triplebottom-line (TBL) (Sikdar 2007; Vinodh et al. 2012).”
BackgroundA canonical correlation analysis of the relationship between sustainability and competitiveness
dos Santos, S. F., & Brandi, H. S. (2014) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-014-0755-2 · Cited by 31 · cited 9×
“In one of the earlier works on S-LCA, Dreyer et al. (2006) proposed a conceptual S-LCA framework using ILO conventions. The pathway model (framework), from top to down, included an area of protection (human dignity and well-being) and midpoints (impacts of companies on employees). As a new concept, they included a two…”
BackgroundMethodInfluentialNorris, C. B., Aulisio, D., & Norris, G. A. (2012) · Springer eBooks · doi:10.1007/978-3-642-29069-5_98 · Cited by 26 · cited 4×
“(iii) The present methodology of the SHI needs further improvement to make it more objective, and one alternative could be the inclusion of multi-criteria decision analysis in the SHI (Benoı̂t-Norris et al. 2012a, 2013).”
MethodInfluentialKoffler, C. (2012) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0532-6 · Cited by 8
Labuschagne, C., & Brent, A. C. (2005) · UpSpace Institutional Repository (University of Pretoria) · Cited by 6
Research works printed but not linked: 6
- Ciroth A, Franze J (2011) LCA of an ecolabeled notebook: consideration of social and environmental Impacts along the entire life cycle. GreenDeltaTC GmbH, Berlin
- ISO (2006a) ISO 14040: environmental management—life cycle assessment—principles and framework. International Organization of Standardization, London
- ISO (2006b) ISO 14044: Environmental management—life cycle assessment—requirements and guidelines. International Organization of Standardization, London
- Paragahawewa U, Blackett P, Small B (2009) Social life cycle analysis (S-LCA): some methodological issues and potential application to cheese production in New Zealand. AgResearch Ltd., New Zealand
- UNEP/SETAC (2009) Guidelines for social life cycle assessment of products. UNEP/SETAC Life Cycle Initiative, Druk in de weer
- Valdivia S, Ugaya CML, Sonnemann G, Hildenbrand J (eds) (2011) Towards a life cycle sustainability assessment: making informed choices on products. UNEP/SETAC Life Cycle Initiative, Paris
Cited by
Dantas, T. E. T., de-Souza, E. D., Destro, I. R., Hammes, G., Rodriguez, C. M. T., & Soares, S. R. (2021) · Sustainable Production and Consumption · doi:10.1016/j.spc.2020.10.005 · Cited by 685
Zimmer, K., Fröhling, M., & Schultmann, F. (2016) · International Journal of Production Research · doi:10.1080/00207543.2015.1079340 · Cited by 445
Systematic literature review in social life cycle assessment
Petti, L., Serreli, M., & Di Cesare, S. (2018) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1135-4 · Cited by 216
“Pathways are formulated on the basis of scientific evidence (Parent et al. 2010; Chhipi-Shrestha et al. 2015).”
BackgroundPast and future of Social Life Cycle Assessment: Historical evolution and research trends
Ramos Huarachi, D. A., Piekarski, C. M., Puglieri, F. N., & de Francisco, A. C. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121506 · Cited by 183
The role of manufacturing in affecting the social dimension of sustainability
Sutherland, J. W., Richter, J. S., Hutchins, M. J., Dornfeld, D., Dzombak, R., Mangold, J., Robinson, S., Hauschild, M. Z., Bonou, A., Schönsleben, P., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.003 · Cited by 172
“The literature also has a number of reviews of the field of S-LCA aiming to systematize, describe, and synthesize knowledge from S-LCA studies [50,144,167, 185,210,219,269].”
Background
Metadata
- Authors
- Chhipi-Shrestha, G. K., Hewage, K., & Sadiq, R.
- Affiliations
- University of British Columbia (CA)
- Corresponding author
- Sadiq, Rehan
- Venue
- Clean Technologies and Environmental Policy
- Published
- 2014-08-24
- Volume
- 17
- Issue
- 3
- Pages
- 579-596
- ISSN
- 1618-954X (ISSN-L)
- 1618-9558
- OpenAlex
- W2071450019
- Cited by
- 156
- References
- 52
- Citations by year
- 2026: 5 · 2025: 6 · 2024: 15 · 2023: 15 · 2022: 9 · 2021: 16 · 2020: 11 · 2019: 16 · 2018: 19 · 2017: 25 · 2016: 15 · 2015: 3 · 2014: 1
- FWCI
- 11.26
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- Locations
- Clean Technologies and Environmental Policy (publishedVersion)
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Physical Sciences › Environmental Science › Management, Monitoring, Policy and Law › Environmental and Social Impact Assessments
- Physical Sciences › Environmental Science › Ecology › Agriculture Sustainability and Environmental Impact
- Keywords
- social sustainability, social hotspots, sustainability assessment methodology
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.