The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Utilization of various lignocellulosic biomass for the production of nanocellulose: a comparative study
Open accessAbstract
Nanocellulose was successfully extracted from five different lignocellulosic biomass sources viz. banana rachis, sisal, kapok, pineapple leaf and coir using a combination of chemical treatments such as alkaline treatment, bleaching and acid hydrolysis. The shape, size and surface properties of the nanocellulose generally depend on the source and hydrolysis conditions. A comparative study of the fundamental properties of raw material, bleached and nanocellulose was carried out by means of Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscopy, transmission electron microscopy, birefringence, X-ray diffraction, inverse gas chromatography and thermogravimetric analysis. Through the characterization of the nanocellulose obtained from different sources, the isolated nanocellulose showed an average diameter in the range of 10–25 nm, high crystallinity, high thermal stability and a great potential to be used with acid coupling agents due to a predominantly basic surface. This work provides an insight into the effective utilization of a variety of plant biomass as a potential source for nanocellulose extraction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Chemical surface modifications of microfibrillated cellulose
Stenstad, P., Andresen, M., Tanem, B. S., & Stenius, P. (2008) · Cellulose · doi:10.1007/s10570-007-9143-y · Cited by 374
Cited by
Understanding Nanocellulose–Water Interactions: Turning a Detriment into an Asset
Solhi, L., Guccini, V., Heise, K., Solala, I., Niinivaara, E., Xu, W., Mihhels, K., Kröger, M., Meng, Z., Wohlert, J., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00611 · Cited by 506
Cellulose nanocrystals: Pretreatments, preparation strategies, and surface functionalization
Rana, A. K., Frollini, E., & Thakur, V. K. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.05.119 · Cited by 412
Liu, C., Li, B., Du, H., Lv, D., Zhang, Y., Yu, G., Mu, X., & Peng, H. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.06.025 · Cited by 382
Isolation and characterisation of cellulose nanocrystals from sago seed shells
Naduparambath, S., T.V., J., V., S., M.P., S., Balan, A. K., & E., P. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.088 · Cited by 373
Emerging technologies for the production of nanocellulose from lignocellulosic biomass
Pradhan, D., Jaiswal, A. K., & Jaiswal, S. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119258 · Cited by 294
Metadata
- Authors
- Deepa, B., Abraham, E., Cordeiro, N., Mozetic, M., Mathew, A. P., Oksman, K., Faria, M., Thomas, S., & Pothan, L. A.
- Venue
- Cellulose
- Published
- 2015-01-28
- Volume
- 22
- Issue
- 2
- Pages
- 1075-1090
- ISSN
- 0969-0239 (ISSN-L)
- 1572-882X
- OpenAlex
- W1996065962
- Cited by
- 420
- References
- 3
- FWCI
- 6.64
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Utilization of various lignocellulosic biomass for the production of nanocellulose: a comparative study. https://app.cochat.ai/papers/10.1007/s10570-015-0554-x
- The paper
- Deepa, B., Abraham, E., Cordeiro, N., Mozetic, M., Mathew, A. P., Oksman, K., Faria, M., Thomas, S., & Pothan, L. A. (2015). Utilization of various lignocellulosic biomass for the production of nanocellulose: a comparative study. Cellulose. https://doi.org/10.1007/s10570-015-0554-x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.