The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
A review of diagnostic and prognostic capabilities and best practices for manufacturing
Open accessAbstract
Prognostics and health management (PHM) technologies reduce time and costs for maintenance of products or processes through efficient and cost-effective diagnostic and prognostic activities. PHM systems use real-time and historical state information of subsystems and components to provide actionable information, enabling intelligent decision-making for improved performance, safety, reliability, and maintainability. However, PHM is still an emerging field, and much of the published work has been either too exploratory or too limited in scope. Future smart manufacturing systems will require PHM capabilities that overcome current challenges, while meeting future needs based on best practices, for implementation of diagnostics and prognostics. This paper reviews the challenges, needs, methods, and best practices for PHM within manufacturing systems. This includes PHM system development of numerous areas highlighted by diagnostics, prognostics, dependability analysis, data management, and business. Based on current capabilities, PHM systems are shown to benefit from open-system architectures, cost-benefit analyses, method verification and validation, and standards.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent advances and trends in predictive manufacturing systems in big data environment
Lee, J., Lapira, E., Bagheri, B., & Kao, H.-A. (2013) · Manufacturing Letters · doi:10.1016/j.mfglet.2013.09.005 · Cited by 1,090
An overview of time-based and condition-based maintenance in industrial application
Ahmad, R., & Kamaruddin, S. (2012) · Computers & Industrial Engineering · doi:10.1016/j.cie.2012.02.002 · Cited by 968
Prognostics and Health Management of Electronics
Pecht, M. G. (2008) · Wiley eBooks · doi:10.1002/9780470385845 · Cited by 847
The dawning of the autonomic computing era
Ganek, A. G., & Corbi, T. A. (2003) · IBM Systems Journal · doi:10.1147/sj.421.0005 · Cited by 844
Current status of machine prognostics in condition-based maintenance: a review
Peng, Y., Dong, M., & Zuo, M. J. (2010) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2482-0 · Cited by 735
Metrics for Offline Evaluation of Prognostic Performance
Saxena, A., Celaya, J., Saha, B., Saha, S., & Goebel, K. (2021) · International Journal of Prognostics and Health Management · doi:10.36001/ijphm.2010.v1i1.1336 · Cited by 449
Prognostics and health management of electronics
Vichare, N. M., & Pecht, M. G. (2006) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2006.870387 · Cited by 433
Maintenance: Changing Role in Life Cycle Management
Takata, S., Kirnura, F., van Houten, F. J. A. M., Westkamper, E., Shpitalni, M., Ceglarek, D., & Lee, J. (2004) · CIRP Annals · doi:10.1016/s0007-8506(07)60033-x · Cited by 388
System health monitoring and prognostics — a review of current paradigms and practices
Kothamasu, R., Huang, S. H., & VerDuin, W. H. (2006) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-004-2131-6 · Cited by 346
Djurdjanovic, D., Lee, J., & Ni, J. (2003) · Advanced Engineering Informatics · doi:10.1016/j.aei.2004.07.005 · Cited by 305
Cited by
Diez-Olivan, A., Del Ser, J., Galar, D., & Sierra, B. (2019) · Information Fusion · doi:10.1016/j.inffus.2018.10.005 · Cited by 633
On Predictive Maintenance in Industry 4.0: Overview, Models, and Challenges
Achouch, M., Dimitrova, M., Ziane, K., Sattarpanah Karganroudi, S., Dhouib, R., Ibrahim, H., & Adda, M. (2022) · Applied Sciences · doi:10.3390/app12168081 · Cited by 528
Occupational health and safety in the industry 4.0 era: A cause for major concern?
Badri, A., Boudreau-Trudel, B., & Souissi, A. S. (2018) · Safety Science · doi:10.1016/j.ssci.2018.06.012 · Cited by 443
An Improved Generic Hybrid Prognostic Method for RUL Prediction Based on PF-LSTM Learning
Xue, K., Yang, J., Yang, M., & Wang, D. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3251391 · Cited by 75
Mourtzis, D., Angelopoulos, J., & Panopoulos, N. (2020) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2020.578379 · Cited by 70
Metadata
- Authors
- Vogl, G. W., Weiss, B. A., & Helu, M.
- Venue
- Journal of Intelligent Manufacturing
- Published
- 2016-06-09
- Volume
- 30
- Issue
- 1
- Pages
- 79-95
- ISSN
- 0956-5515 (ISSN-L)
- 1572-8145
- OpenAlex
- W2412781046
- Cited by
- 326
- References
- 29
- FWCI
- 46.80
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review of diagnostic and prognostic capabilities and best practices for manufacturing. https://app.cochat.ai/papers/10.1007/s10845-016-1228-8
- The paper
- Vogl, G. W., Weiss, B. A., & Helu, M. (2019). A review of diagnostic and prognostic capabilities and best practices for manufacturing. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-016-1228-8
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.