Smart manufacturing based on cyber-physical systems and beyond
Open accessThe DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Abstract
Cyber-physical systems (CPS) have gained an increasing attention recently for their immense potential towards the next generation smart systems that integrate cyber technology into the physical processes. However, CPS did not initiate either smart factories or smart manufacturing, and vice versa. Historically, the smart factory was initially studied with the introduction of the Internet of Things (IoT) in manufacturing, and later became a key part of Industry 4.0. Also emerging are other related models such as cloud manufacturing, social manufacturing and proactive manufacturing with the introduction of cloud computing (broadly, the Internet of Services, IoS), social networking (broadly, the Internet of People, IoP) and big data (broadly, the Internet of Content and Knowledge, IoCK), respectively. At present, there is a lack of a systemic and comprehensive study on the linkages and relations between these terms. Therefore, this study first presents a comprehensive survey and analysis of the CPS treated as a combination of the IoT and the IoS. Then, the paper addresses CPS-based smart manufacturing as an eight tuple of CPS,IoT, IoS and IoCK as elements. Further, the paper extends the eight-tuple CPS-based manufacturing to social-CPS (SCPS)-based manufacturing, termed wisdom manufacturing, which forms a nine tuple with the addition of one more element, the IoP and which is based on the SCPS instead of CPS. Both architectures and characteristics for smart and wisdom manufacturing are addressed. As such, these terms’ linkages are established and relations are clarified with a special discussion. This study thus contributes as a theoretical basis and as a comprehensive framework for emerging manufacturing integration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Knowledge-Creating Company: How Japanese Companies Create the Dynamics of Innovation
Nonaka, I., & Takeuchi, H. (1995) · doi:10.1093/oso/9780195092691.001.0001 · Cited by 18,010
The Internet of Things: A survey
Atzori, L., Iera, A., & Morabito, G. (2010) · Computer Networks · doi:10.1016/j.comnet.2010.05.010 · Cited by 15,613
The Knowledge-creating company: How Japanese companies create the dynamics of innovation
(1997) · Research Policy · doi:10.1016/s0048-7333(97)80234-x · Cited by 13,156
A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems
Lee, J., Bagheri, B., & Kao, H.-A. (2015) · Manufacturing Letters · doi:10.1016/j.mfglet.2014.12.001 · Cited by 5,113 · cited 1×
“…interoperable service-oriented collaboration between distributed business applications, and enables equipment in process operations to autonomously recognize and respond to situations, thus making it different from traditionally implemented enterprise hierarchy (Feld et al. 2012; Lee et al. 2015).”
BackgroundLasi, H., Fettke, P., Kemper, H.-G., Feld, T., & Hoffmann, M. (2014) · Business & Information Systems Engineering · doi:10.1007/s12599-014-0334-4 · Cited by 4,276 · cited 1×
“1, the smart factory has become a key component of Industry 4.0 (Lasi et al. 2014).”
BackgroundInfluentialCyber Physical Systems: Design Challenges
Lee, E. A. (2008) · 2008 11th IEEE International Symposium on Object and Component-Oriented Real-Time Distributed Computing (ISORC) · doi:10.1109/isorc.2008.25 · Cited by 3,525
The rise of big data on cloud computing: Review and open research issues
Hashem, I. A. T., Yaqoob, I., Anuar, N. B., Mokhtar, S., Gani, A., & Ullah Khan, S. (2015) · Information Systems · doi:10.1016/j.is.2014.07.006 · Cited by 2,656
Service Innovation and Smart Analytics for Industry 4.0 and Big Data Environment
Lee, J., Kao, H.-A., & Yang, S. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.02.001 · Cited by 1,965
Responsible research and innovation: From science in society to science for society, with society
Owen, R., Macnaghten, P., & Stilgoe, J. (2012) · Science and Public Policy · doi:10.1093/scipol/scs093 · Cited by 1,607
Poetz, M. K., & Schreier, M. (2012) · Journal of Product Innovation Management · doi:10.1111/j.1540-5885.2011.00893.x · Cited by 1,244
Recent advances and trends in predictive manufacturing systems in big data environment
Lee, J., Lapira, E., Bagheri, B., & Kao, H.-A. (2013) · Manufacturing Letters · doi:10.1016/j.mfglet.2013.09.005 · Cited by 1,090
Industrial Product-Service Systems—IPS 2
Meier, H., Roy, R., & Seliger, G. (2010) · CIRP Annals · doi:10.1016/j.cirp.2010.05.004 · Cited by 994
Reconfigurable manufacturing systems: Key to future manufacturing
Mehrabi, M. G., Ulsoy, A. G., & Koren, Y. (2000) · Journal of Intelligent Manufacturing · doi:10.1023/a:1008930403506 · Cited by 961
Current status and advancement of cyber-physical systems in manufacturing
Wang, L., Törngren, M., & Onori, M. (2015) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2015.04.008 · Cited by 948 · cited 2×
“A CPPS can be described as a eight-tuple: Figure 3 gives a reference architecture for the CPS-based manufacturing, which illustrates the constitutional components and their interactions.”
BackgroundComputer Integrated Manufacturing Systems
Sdol, E. (2009) · Cited by 931
Shrouf, F., Ordieres, J., & Miragliotta, G. (2014) · 2014 IEEE International Conference on Industrial Engineering and Engineering Management · doi:10.1109/ieem.2014.7058728 · Cited by 909
Modeling Cyber–Physical Systems
Derler, P., Lee, E. A., & Vincentelli, A. S. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2011.2160929 · Cited by 762
Internet of Things for Enterprise Systems of Modern Manufacturing
Bi, Z., Xu, L. D., & Wang, C. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2300338 · Cited by 672
Design Principles for Industrie 4.0 Scenarios: A Literature Review
Pentek, M., & Otto, B. (2015) · Cited by 646
SmartFactory—Towards a factory-of-things
Zuehlke, D. (2010) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2010.02.008 · Cited by 645 · cited 1×
“…the introduction of the Internet of Things (IoT) and the Internet of Services (IoS) in manufacturing has initiated Industry 4.0 in Germany, i.e. the fourth industrial revolution (Kagermann et al. 2013), which is transforming today’s factories into smart ones (Zuehlke 2010; Hermann et al. 2015).”
BackgroundInfluentialA survey of Cyber-Physical Systems
Shi, J., Wan, J., Yan, H., & Suo, H. (2011) · 2011 International Conference on Wireless Communications and Signal Processing (WCSP) · doi:10.1109/wcsp.2011.6096958 · Cited by 608
Zhang, Y., Ren, S., Liu, Y., & Si, S. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.123 · Cited by 512
Self-citationA Survey on Concepts, Applications, and Challenges in Cyber-Physical Systems
(2014) · KSII Transactions on Internet and Information Systems · doi:10.3837/tiis.2014.12.001 · Cited by 392
Shrouf, F., & Miragliotta, G. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.03.055 · Cited by 380
The impact of big data on world-class sustainable manufacturing
Dubey, R., Gunasekaran, A., Childe, S. J., Wamba, S. F., & Papadopoulos, T. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7674-1 · Cited by 362
Cyber-Physical Systems: A New Frontier
Sha, L., Gopalakrishnan, S., Liu, X., & Wang, Q. (2008) · 2008 IEEE International Conference on Sensor Networks, Ubiquitous, and Trustworthy Computing (sutc 2008) · doi:10.1109/sutc.2008.85 · Cited by 312
Internet of Things: Objectives and Scientific Challenges
Ma, H.-D. (2011) · Journal of Computer Science and Technology · doi:10.1007/s11390-011-1189-5 · Cited by 283
Real-time information capturing and integration framework of the internet of manufacturing things
Zhang, Y., Zhang, G., Wang, J., Sun, S., Si, S., & Yang, T. (2015) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2014.900874 · Cited by 274
Cloud manufacturing: from concept to practice
Ren, L., Zhang, L., Tao, F., Zhao, C., Chai, X., & Zhao, X. (2015) · Enterprise Information Systems · doi:10.1080/17517575.2013.839055 · Cited by 260
RFID-based wireless manufacturing for real-time management of job shop WIP inventories
Huang, G. Q., Zhang, Y., & Jiang, P. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0897-4 · Cited by 234
Yao, X., Zhou, J., Zhang, J., & Boer, C. R. (2017) · 2017 5th International Conference on Enterprise Systems (ES) · doi:10.1109/es.2017.58 · Cited by 185
Self-citationSelf-maintenance and engineering immune systems: Towards smarter machines and manufacturing systems
Lee, J., Ghaffari, M., & Elmeligy, S. (2011) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2011.03.007 · Cited by 163
Emerging manufacturing paradigm shifts for the incoming industrial revolution
Yao, X., & Lin, Y. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-8076-0 · Cited by 163
Self-citationDavis, J., Edgar, T., Graybill, R., Korambath, P., Schott, B., Swink, D., Wang, J., & Wetzel, J. (2015) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-061114-123255 · Cited by 162
System Architectures, Protocols and Algorithms for Aperiodic Wireless Control Systems
Araújo, J., Mazo, M., Anta, A., Tabuada, P., & Johansson, K. H. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2262281 · Cited by 153
Research challenges and perspectives on Wisdom Web of Things (W2T)
Zhong, N., Ma, J. H., Huang, R. H., Liu, J. M., Yao, Y. Y., Zhang, Y. X., & Chen, J. H. (2010) · The Journal of Supercomputing · doi:10.1007/s11227-010-0518-8 · Cited by 133
Web‐of‐things framework for cyber–physical systems
Dillon, T. S., Zhuge, H., Wu, C., Singh, J., & Chang, E. (2011) · Concurrency and Computation: Practice and Experience · doi:10.1002/cpe.1629 · Cited by 90
Towards a wisdom manufacturing vision
Yao, X., Jin, H., & Zhang, J. (2014) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2014.972462 · Cited by 65
Self-citationA vision of cyber-physical internet
Koubâa, A., & Andersson, B. A. (2009) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 61
Pang, L. Y., Zhong, R. Y., Fang, J., & Huang, G. Q. (2015) · Advanced Engineering Informatics · doi:10.1016/j.aei.2015.04.007 · Cited by 49
Glocalized cyber physical production systems
Verl, A. W., Lechler, A., & Schlechtendahl, J. (2012) · Production Engineering · doi:10.1007/s11740-012-0418-2 · Cited by 36
Wisdom manufacturing:new humans-computers-things collaborative manufacturing model
Xi-fa, Y. (2014) · Cited by 29
Lee, J. Y., Choi, S. S., Kim, G. Y., et al. (2011) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2011.569953 · Cited by 21
From Just in Time Manufacturing to On-Demand Services
Krishnamurthy, A. (2007) · Integrated series on information systems/Integrated series in information systems · doi:10.1007/978-0-387-46364-3_1 · Cited by 10
Cited by
Digital twin paradigm: A systematic literature review
Semeraro, C., Lezoche, M., Panetto, H., & Dassisti, M. (2021) · Computers in Industry · doi:10.1016/j.compind.2021.103469 · Cited by 986
Zheng, T., Ardolino, M., Bacchetti, A., & Perona, M. (2021) · International Journal of Production Research · doi:10.1080/00207543.2020.1824085 · Cited by 728
Smart Manufacturing and Intelligent Manufacturing: A Comparative Review
Wang, B., Tao, F., Fang, X., Liu, C., Liu, Y., & Freiheit, T. (2021) · Engineering · doi:10.1016/j.eng.2020.07.017 · Cited by 542
Self-citationBag, S., & Pretorius, J. H. C. (2022) · International Journal of Organizational Analysis · doi:10.1108/ijoa-04-2020-2120 · Cited by 506
Augmented reality in support of intelligent manufacturing – A systematic literature review
Egger, J., & Masood, T. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.106195 · Cited by 391
Metadata
- Authors
- Yao, X., Zhou, J., Lin, Y., Li, Y., Yu, H., & Liu, Y.
- Venue
- Journal of Intelligent Manufacturing
- Published
- 2017-12-28
- Volume
- 30
- Issue
- 8
- Pages
- 2805-2817
- ISSN
- 0956-5515 (ISSN-L)
- 1572-8145
- OpenAlex
- W2775835322
- Cited by
- 283
- References
- 44
- FWCI
- 18.89
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.