The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
Review: recent progress in low-temperature proton-conducting ceramics
Open accessAbstract
Proton-conducting ceramics (PCCs) are of considerable interest for use in energy conversion and storage applications, electrochemical sensors, and separation membranes. PCCs that combine performance, efficiency, stability, and an ability to operate at low temperatures are particularly attractive. This review summarizes the recent progress made in the development of low-temperature proton-conducting ceramics (LT-PCCs), which are defined as operating in the temperature range of 25–400 °C. The structure of these ceramic materials, the characteristics of proton transport mechanisms, and the potential applications for LT-PCCs will be summarized with an emphasis on protonic conduction occurring at interfaces. Three temperature zones are defined in the LT-PCC operating regime based on the predominant proton transfer mechanism occurring in each zone. The variation in material properties, such as crystal structure, conductivity, microstructure, fabrication methods required to achieve the requisite grain size distribution, along with typical strategies pursued to enhance the proton conduction, is addressed. Finally, a perspective regarding applications of these materials to low-temperature solid oxide fuel cells, hydrogen separation membranes, and emerging areas in the nuclear industry including off-gas capture and isotopic separations is presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
THE CONSTITUTION AND FUNDAMENTAL PROPERTIES OF SOLIDS AND LIQUIDS. PART I. SOLIDS.
Langmuir, I. (1916) · Journal of the American Chemical Society · doi:10.1021/ja02268a002 · Cited by 9,997
Materials for fuel-cell technologies
Steele, B. C. H., & Heinzel, A. (2001) · Nature · doi:10.1038/35104620 · Cited by 7,772
Lowering the Temperature of Solid Oxide Fuel Cells
Wachsman, E. D., & Lee, K. T. (2011) · Science · doi:10.1126/science.1204090 · Cited by 2,554
Kreuer, K. D. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.022802.091825 · Cited by 2,395
Hübert, T., Boon-Brett, L., Black, G., & Banach, U. (2011) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2011.04.070 · Cited by 1,713
IWAHARA, H., ESAKA, T., UCHIDA, H., & MAEDA, N. (1981) · Solid State Ionics · doi:10.1016/0167-2738(81)90113-2 · Cited by 1,485
Kreuer, K. D. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(99)00188-5 · Cited by 966
Materials challenges toward proton-conducting oxide fuel cells: a critical review
Fabbri, E., Pergolesi, D., & Traversa, E. (2010) · Chemical Society Reviews · doi:10.1039/b902343g · Cited by 937
Malavasi, L., Fisher, C. A. J., & Islam, M. S. (2010) · Chemical Society Reviews · doi:10.1039/b915141a · Cited by 895
Cited by
Electrolysis of low-grade and saline surface water
Tong, W., Forster, M., Dionigi, F., Dresp, S., Sadeghi Erami, R., Strasser, P., Cowan, A. J., & Farràs, P. (2020) · Nature Energy · doi:10.1038/s41560-020-0550-8 · Cited by 1,299
Metadata
- Authors
- Meng, Y., Gao, J., Zhao, Z., Amoroso, J., Tong, J., & Brinkman, K. S.
- Venue
- Journal of Materials Science
- Published
- 2019-04-09
- Volume
- 54
- Issue
- 13
- Pages
- 9291-9312
- ISSN
- 0022-2461 (ISSN-L)
- 1573-4803
- OpenAlex
- W2937675615
- Cited by
- 255
- References
- 66
- FWCI
- 9.55
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Review: recent progress in low-temperature proton-conducting ceramics. https://app.cochat.ai/papers/10.1007/s10853-019-03559-9
- The paper
- Meng, Y., Gao, J., Zhao, Z., Amoroso, J., Tong, J., & Brinkman, K. S. (2019). Review: recent progress in low-temperature proton-conducting ceramics. Journal of Materials Science. https://doi.org/10.1007/s10853-019-03559-9
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.