The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Proton-Conducting Oxides
Abstract
▪ Abstract The structural and chemical parameters determining the formation and mobility of protonic defects in oxides are discussed, and the paramount role of high-molar volume, coordination numbers, and symmetry are emphasized. Symmetry also relates to the structural and chemical matching of the acceptor dopant. Y-doped BaZrO 3-based oxides are demonstrated to combine high stability with high proton conductivity that exceeds the conductivity of the best oxide ion conductors at temperatures below about 700°C. The unfavorably high grain boundary impedances and brittleness of ceramics have been reduced by forming solid solutions with small amounts of BaCeO 3, and an initial fuel cell test has demonstrated that proton-conducting electrolytes based on Y-doped BaZrO 3 provide alternatives for separator materials in solid oxide fuel cells (SOFCs). These materials have the potential to operate at lower temperatures compared with those of conventional SOFCs, and the appearance of chemical water diffusion across the electrolyte at typical operation temperatures (T = 500–800°C) allows the use of dry methane as a fuel.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for fuel-cell technologies
Steele, B. C. H., & Heinzel, A. (2001) · Nature · doi:10.1038/35104620 · Cited by 7,772
On the development of proton conducting materials for technological applications
Kreuer, K. D. (1997) · Solid State Ionics · doi:10.1016/s0167-2738(97)00082-9 · Cited by 1,036
Self-citationKreuer, K. D. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(99)00188-5 · Cited by 966
Self-citationProton Conduction in Sintered Oxides Based on BaCeO3
Iwahara, H., Uchida, H., Ono, K., & Ogaki, K. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095649 · Cited by 789
Protonic conduction in Zr-substituted BaCeO3
Katahira, K., Kohchi, Y., Shimura, T., & Iwahara, H. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00777-3 · Cited by 750
Chemical stability and proton conductivity of doped BaCeO3–BaZrO3 solid solutions
Ryu, K. H., & Haile, S. M. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(99)00196-4 · Cited by 719
Kreuer, K. D., Adams, S., Münch, W., Fuchs, A., Klock, U., & Maier, J. (2001) · Solid State Ionics · doi:10.1016/s0167-2738(01)00953-5 · Cited by 709
Self-citationOn the complexity of proton conduction phenomena
Kreuer, K. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00301-5 · Cited by 392
Self-citationPerovskite solid electrolytes: Structure, transport properties and fuel cell applications
Bonanos, N. (1995) · Solid State Ionics · doi:10.1016/0167-2738(95)00056-c · Cited by 368
Iwahara, H., Yajima, T., Hibino, T., & Ushida, H. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221624 · Cited by 256
Cited by
Fundamentals and Catalytic Applications of CeO 2 -Based Materials
Montini, T., Melchionna, M., Monai, M., & Fornasiero, P. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00603 · Cited by 2,766
Kreuer, K.-D., Paddison, S. J., Spohr, E., & Schuster, M. (2004) · Chemical Reviews · doi:10.1021/cr020715f · Cited by 2,187
Self-citationRecent Advances and Challenges of Electrocatalytic N2Reduction to Ammonia
Qing, G., Ghazfar, R., Jackowski, S. T., Habibzadeh, F., Ashtiani, M. M., Chen, C.-P., Smith, M. R., & Hamann, T. W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00659 · Cited by 1,323
Yang, L., Wang, S., Blinn, K., Liu, M., Liu, Z., Cheng, Z., & Liu, M. (2009) · Science · doi:10.1126/science.1174811 · Cited by 1,225
A new class of high-entropy perovskite oxides
Jiang, S., Hu, T., Gild, J., Zhou, N., Nie, J., Qin, M., Harrington, T., Vecchio, K., & Luo, J. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.08.040 · Cited by 962
Metadata
- Authors
- Kreuer, K. D.
- Venue
- Annual Review of Materials Research
- Publisher
- Annual Reviews
- Published
- 2003-08
- Volume
- 33
- Issue
- 1
- Pages
- 333-359
- ISSN
- 1531-7331 (ISSN-L)
- 1545-4118
- OpenAlex
- W2169892476
- Cited by
- 2,395
- References
- 38
- FWCI
- 2.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Proton-Conducting Oxides. https://app.cochat.ai/papers/10.1146/annurev.matsci.33.022802.091825
- The paper
- Kreuer, K. D. (2003). Proton-Conducting Oxides. Annual Review of Materials Research. https://doi.org/10.1146/annurev.matsci.33.022802.091825
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.