Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 0

The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.

Using Fungal Biomass to Enhance Biodegradability and Flexibility of Plasticized Poly(lactic acid) Matrix Composites

Asadollahzadeh, Mohsen, Heinmaa, Ivo, Åkesson, Dan, Lennartsson, Patrik R. · 2026 · Journal of Polymers and the Environment

Abstract

Poly(lactic acid) (PLA) has great potential in the plastic packaging industry due to its biodegradability, versatility, and good performance. PLA compounding with different biobased materials to enhance the flexibility and biodegradability of PLA-based packaging materials has attracted growing attention. Fungal biomass (FB), as a biological and eco-friendly by-product stream from fermentation processes, can be a valuable blending component in PLA-based biocomposites. Therefore, in this study, 10 and 20 wt% of fungal biomass (FB), defatted fungal biomass (DFB), and fungal cell wall (FCW), as promising biobased materials, were added to PLA plasticised with 10 wt% triethyl citrate (TEC) to fabricate biocomposites using the melt compounding technique. Our research focused on how the addition of fungal biomass and its fractions affected the mechanical and thermal properties, as well as the structure of PLA-based blends. These additions did not increase the strength of the biocomposites, but they did improve flexibility compared to regular plasticised PLA. The crystallisation of plasticised PLA samples blended with FB and DFB began at lower temperatures than neat PLA, plasticised PLA, and plasticised PLA blended with FCW. The addition of fungal biomass and its fractions, particularly at 20 wt%, accelerated the biodegradation of PLA-based composites. Neat PLA and plasticised PLA degraded slowly in soil and retained most of their mass, whereas PLA-based blends containing FB and its fractions degraded significantly faster. It can be concluded that fungal biomass is a promising candidate for improving the flexibility of PLA blends and facilitating their biodegradation in a natural soil environment.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1007/s10924-026-03779-6

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 3 references

Research works printed but not linked: 37

  1. Phadke G, Rawtani D (2023) Bioplastics as polymeric Building blocks: paving the way for greener and cleaner environment. Eur Polym J 199:112453. https://doi.org/10.1016/j.eurpolymj.2023.112453 · DOI
  2. Tripathi N, Misra M, Mohanty AK (2021) Durable polylactic acid (PLA)-Based sustainable engineered blends and biocomposites: recent Developments, Challenges, and opportunities. ACS Eng Au 1:7–38. https://doi.org/10.1021/acsengineeringau.1c00011 · DOI · Paper page
  3. Kim PD et al (2023) Economic and environmentally viable Preparation of a biodegradable polymer composite from lignocellulose. J Ind Eng Chem 122:221–230. https://doi.org/10.1016/j.jiec.2023.02.023 · DOI
  4. Andrzejewski J et al (2024) The development of Poly(lactic acid) (PLA)-Based blends and modification strategies: methods of improving key properties towards technical Applications—Review. Materials 17. https://doi.org/10.3390/ma17184556 · DOI
  5. Rosli NA, Ahmad I, Anuar FH, Abdullah I (2018) The contribution of eco-friendly bio-based blends on enhancing the thermal stability and biodegradability of Poly(lactic acid). J Clean Prod 198:987–995. https://doi.org/10.1016/j.jclepro.2018.07.119 · DOI
  6. Lombardi A et al (2022) Natural active ingredients for Poly (Lactic Acid)-Based materials: state of the Art and perspectives. Antioxidants 11. https://doi.org/10.3390/antiox11102074 · DOI
  7. Shahdan D, Rosli NA, Chen RS, Ahmad S, Gan S (2023) Strategies for strengthening toughened poly(lactic acid) blend via natural reinforcement with enhanced biodegradability: A review. Int J Syst Bacteriol 251:126214. https://doi.org/10.1016/j.ijbiomac.2023.126214 · DOI
  8. Trivedi AK, Gupta MK, Singh H (2023) PLA based biocomposites for sustainable products: A review. Adv Ind Eng Polym Res 6:382–395. https://doi.org/10.1016/j.aiepr.2023.02.002 · DOI · Paper page
  9. Claro PIC, Neto ARS, Bibbo ACC, Mattoso LHC, Bastos MSR, Marconcini JM (2016) Biodegradable blends with potential use in packaging: A comparison of PLA/Chitosan and PLA/Cellulose acetate films. J Polym Environ 24:363–371. https://doi.org/10.1007/s10924-016-0785-4 · DOI
  10. Olaiya NG et al (2022) Viscoelastic and Properties of Amphiphilic Chitin in Plasticised Polylactic Acid/Starch Biocomposite. Polymers 14 https://doi.org/10.3390/polym14112268 · doi:10.3390/polym14112268
  11. Wang Y et al (2023) Preparation and properties of Graft-Modified Bagasse Cellulose/Polylactic acid composites. J Nat Fibers 20:2164822. https://doi.org/10.1080/15440478.2022.2164822 · DOI
  12. Lv S, Liu X, Gu J, Jiang Y, Tan H, Zhang Y (2017) Microstructure analysis of polylactic acid-based composites during degradation in soil. Int Biodeterior Biodegrad 122:53–60. https://doi.org/10.1016/j.ibiod.2017.04.017 · DOI
  13. Yang S et al (2015) Characterization and biodegradation behavior of bio-based poly(lactic acid) and soy protein blends for sustainable horticultural applications. Green Chem 17:380–393. https://doi.org/10.1039/C4GC01482K · DOI
  14. Filipova I et al (2021) Mechanical and air permeability performance of novel biobased materials from fungal hyphae and cellulose fibers. Materials 14. https://doi.org/10.3390/ma14010136 · DOI
  15. Isaza-Pérez F, Ramírez-Carmona M, Rendón-Castrillón L, Ocampo-López C (2020) Potential of residual fungal biomass: a review. Environ Sci Pollut Res 27:13019–13031. https://doi.org/10.1007/s11356-020-08193-6 · DOI · Paper page
  16. Cerimi K, Akkaya KC, Pohl C, Schmidt B, Neubauer P (2019) Fungi as source for new bio-based materials: a patent review. Fungal Biol Biotechnol 6:17. https://doi.org/10.1186/s40694-019-0080-y · DOI · Paper page
  17. Asadollahzadeh M, Mahboubi A, Taherzadeh MJ, Åkesson D, Lennartsson PR (2022) Application of fungal biomass for the development of new polylactic Acid-Based biocomposites. Polymers 14. https://doi.org/10.3390/polym14091738 · DOI · Paper page
  18. L’Hocine L, Boye JI, Arcand Y (2006) Composition and functional properties of soy protein isolates prepared using alternative defatting and extraction procedures. J Food Sci 71:C137–C145. https://doi.org/10.1111/j.1365-2621.2006.tb15609.x · DOI · Paper page
  19. Svensson SE et al (2022) Turning food waste to antibacterial and biocompatible fungal chitin/chitosan monofilaments. Int J Syst Bacteriol 209:618–630. https://doi.org/10.1016/j.ijbiomac.2022.04.031 · DOI
  20. Gigante V, Cinelli P, Sandroni M, D’ambrosio R, Lazzeri A, Seggiani M (2021) On the use of paper sludge as filler in biocomposites for injection moulding. Materials 14. https://doi.org/10.3390/ma14102688 · DOI
  21. Lazaro-Hdez C, Stefani PM, Fenollar O, Garcia-Sanoguera D, Boronat T, Ivorra-Martinez J (2025) Tuning polylactic acid performance using green citrate plasticizers of varying chain lengths. Int J Syst Bacteriol 313:144252. https://doi.org/10.1016/j.ijbiomac.2025.144252 · DOI
  22. Lazaro-Hdez C, Valerga AP, Gomez-Carturla J, Sanchez-Nacher L, Boronat T, Ivorra-Martinez J (2025) Optimization of the ductile properties of poly(lactic acid) (PLA) using green citrate-based plasticizers and Itaconic anhydride grafted PLA (PLA-g-IA). Int J Syst Bacteriol 307:142034. https://doi.org/10.1016/j.ijbiomac.2025.142034 · DOI
  23. Zhou Y, Fan M, Chen L (2016) Interface and bonding mechanisms of plant fibre composites: an overview. Compos B Eng 101:31–45. https://doi.org/10.1016/j.compositesb.2016.06.055 · DOI
  24. Kamaludin NHI, Ismail H, Rusli A, Sam ST (2022) Properties enhancement of chitosan-filled polylactic acid biocomposites using Tannic acid treatment. Polym Compos 43:21–35. https://doi.org/10.1002/pc.26354 · DOI
  25. Mousa N, Galiwango E, Haris S, Al-Marzouqi AH, Abu-Jdayil B, Caires YL (2022) A new green composite based on plasticized polylactic acid mixed with date palm waste for Single-Use plastics applications. Polymers 14. https://doi.org/10.3390/polym14030574 · DOI
  26. Shazleen SS, Foong Ng LY, Ibrahim NA, Hassan MA, Ariffin H (2021) Combined effects of cellulose nanofiber nucleation and maleated polylactic acid compatibilization on the crystallization kinetic and mechanical properties of polylactic acid nanocomposite. Polymers 13:3226. https://doi.org/10.3390/polym13193226 · DOI
  27. Rigotti D, Fambri L, Pegoretti A (2022) Bio-composites for fused filament fabrication: effects of maleic anhydride grafting on poly(lactic acid) and microcellulose. Prog Addit Manuf 7:765–783. https://doi.org/10.1007/s40964-022-00264-z · DOI
  28. Yu T, Ren J, Li S, Yuan H, Li Y (2010) Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites. Compos - A: Appl Sci Manuf 41:499–505. https://doi.org/10.1016/j.compositesa.2009.12.006 · DOI · Paper page
  29. da Costa FAT, Dufresne A, Parra DF (2025) Impact of High-Dose gamma irradiation on PLA/PBAT blends reinforced with cellulose nanoparticles from pineapple leaves. ACS Omega 10:38182–38202. https://doi.org/10.1021/acsomega.5c06115 · DOI
  30. Mysiukiewicz O, Barczewski M (2019) Utilization of linseed cake as a postagricultural functional filler for poly(lactic acid) green composites. J Appl Polym Sci 136:47152. https://doi.org/10.1002/app.47152 · DOI
  31. Righetti MC et al (2019) Thermal, Mechanical, and rheological properties of biocomposites made of Poly(lactic acid) and potato pulp powder. Int J Mol Sci 20. https://doi.org/10.3390/ijms20030675 · DOI
  32. Tsuji H, Horii F, Nakagawa M, Ikada Y, Odani H, Kitamaru R (1992) Stereocomplex formation between enantiomeric poly(lactic acid)s. 7. Phase structure of the stereocomplex crystallized from a dilute acetonitrile solution as studied by high-resolution solid-state carbon-13 NMR spectroscopy. Macromolecules 25:4114–4118. https://doi.org/10.1021/ma00042a011 · DOI · Paper page
  33. Thakur KAM, Kean RT, Zupfer JM, Buehler NU, Doscotch MA, Munson EJ (1996) Solid state 13 C CP-MAS NMR studies of the crystallinity and morphology of Poly(l-lactide). Macromolecules 29:8844–8851. https://doi.org/10.1021/ma960828z · DOI
  34. Pan P et al (2012) Temperature-Variable FTIR and Solid-State 13 C NMR investigations on crystalline structure and molecular dynamics of polymorphic Poly(l-lactide) and Poly(l-lactide)/Poly(d-lactide) stereocomplex. Macromolecules 45:189–197. https://doi.org/10.1021/ma201906a · DOI · Paper page
  35. Pawlak T, Jaworska M, Potrzebowski MJ (2013) NMR crystallography of α-poly(l-lactide). Phys Chem Chem Phys 15:3137–3145. https://doi.org/10.1039/C2CP43174B · DOI
  36. Olčák D, Hronský V, Kovaľaková M, Vrábel P, Chodák I, Alexy P (2015) High-Resolution Solid-State NMR characterization of morphology in annealed polylactic acid. Int J Polym Anal Ch 20:396–405. https://doi.org/10.1080/1023666X.2015.1033831 · DOI
  37. Koval’aková M et al (2016) Morphology and molecular mobility of plasticized polylactic acid studied using solid-state 13 C- and 1H-NMR spectroscopy. J Appl Polym Sci 133. https://doi.org/10.1002/app.43517 · DOI

Metadata

Authors
Asadollahzadeh, M., Heinmaa, I., Åkesson, D., & Lennartsson, P. R.
Venue
Journal of Polymers and the Environment
Published
2026-02-20
Volume
34
Issue
3
ISSN
  • 1566-2543
  • 1572-8919
Cited by
0
References
3
Language
en
Licence
Funders
University of Boras

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Using Fungal Biomass to Enhance Biodegradability and Flexibility of Plasticized Poly(lactic acid) Matrix Composites. https://app.cochat.ai/papers/10.1007/s10924-026-03779-6
The paper
Asadollahzadeh, M., Heinmaa, I., Åkesson, D., & Lennartsson, P. R. (2026). Using Fungal Biomass to Enhance Biodegradability and Flexibility of Plasticized Poly(lactic acid) Matrix Composites. Journal of Polymers and the Environment. https://doi.org/10.1007/s10924-026-03779-6

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.