CoChat

The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.

A Microstructural and Kinetic Investigation of the KCl-Induced Corrosion of an FeCrAl Alloy at 600 °C

Open access

Abstract

The corrosion behaviour of a FeCrAl alloy was investigated at 600 °C in O2 + H2O with solid KCl applied. A kinetics and microstructural investigation showed that KCl accelerates corrosion and that potassium chromate formation depletes the protective scale in Cr, thus triggering the formation of a fast-growing iron-rich scale. Iron oxide was found to grow both inward and outward, on either side of the initial oxide. A chromia layer is formed with time underneath the iron oxide. It was found that although the alloy does not form a continuous pure alumina scale at the investigated temperature, aluminium is, however, always enriched at the oxide/alloy interface.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1007/s11085-015-9546-3

Cites

46 of 46 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 SEM-BSE top-view micrographs of Kanthal Ò APMT exposed with KCl for 0, 10, 30 and 60 min
Fig. 1 SEM-BSE top-view micrographs of Kanthal Ò APMT exposed with KCl for 0, 10, 30 and 60 minCC-BY · From the PDF
Fig. 2 XRD diffractograms of Kanthal Ò APMT exposed for 1 and 9 h. The symbols indicate: K2CrO4 ( black diamond ), a -(CrFe)2O3 ( black circle ), KCl ( black up-pointing triangle ), and substrate ( black square )
Fig. 2 XRD diffractograms of Kanthal Ò APMT exposed for 1 and 9 h. The symbols indicate: K2CrO4 ( black diamond ), a -(CrFe)2O3 ( black circle ), KCl ( black up-pointing triangle ), and substrate ( black square )CC-BY · From the PDF
Fig. 3 SEM-SE top-view micrographs of Kanthal Ò APMT after 1 h exposure. b shows an enlarged image of the boxed area in ( a ). The boxed area in ( b ) shows the area of the TEM foil shown in Fig. 4
Fig. 3 SEM-SE top-view micrographs of Kanthal Ò APMT after 1 h exposure. b shows an enlarged image of the boxed area in ( a ). The boxed area in ( b ) shows the area of the TEM foil shown in Fig. 4CC-BY · From the PDF
Fig. 4 STEM-HAADF micrographs of the oxide scale formed after 1 h of exposure. The EDX line profile from A to B was obtained through the particle on top of the oxide scale as well as the oxide underneath (top micrograph). The second micrograph is an enlargement of the area where the line profile was obtained
Fig. 4 STEM-HAADF micrographs of the oxide scale formed after 1 h of exposure. The EDX line profile from A to B was obtained through the particle on top of the oxide scale as well as the oxide underneath (top micrograph). The second micrograph is an enlargement of the area where the line profile was obtainedCC-BY · From the PDF
Fig. 5 SEM-SE top-view micrographs ( a -c ) and SEM-BSE ( d and BIB cross-section) of Kanthal Ò APMT exposed for 9 h. The boxed area in c shows the area of the TEM foil shown in Fig. 6
Fig. 5 SEM-SE top-view micrographs ( a -c ) and SEM-BSE ( d and BIB cross-section) of Kanthal Ò APMT exposed for 9 h. The boxed area in c shows the area of the TEM foil shown in Fig. 6CC-BY · From the PDF
Fig. 6 STEM-HAADF micrograph and EXD elemental maps of Kanthal Ò APMT exposed for 9 h. The TEM specimen was prepared from the boxed area in Fig. 5c
Fig. 6 STEM-HAADF micrograph and EXD elemental maps of Kanthal Ò APMT exposed for 9 h. The TEM specimen was prepared from the boxed area in Fig. 5cCC-BY · From the PDF
Fig. 7 STEM/EDX line profile (from A to B in Fig. 6) through the remnant of the K2CrO4 particle and the oxide underneath
Fig. 7 STEM/EDX line profile (from A to B in Fig. 6) through the remnant of the K2CrO4 particle and the oxide underneathCC-BY · From the PDF
Image 8
CC-BY · From the PDF
Fig. 9 SEM-BSE micrograph of a one-sided cross-section ( a ) and a STEM-HAADF micrograph ( b ) of APMT exposed for 24 h. The TEM sample was prepared from the one-sided cross-section seen in the upper micrograph
Fig. 9 SEM-BSE micrograph of a one-sided cross-section ( a ) and a STEM-HAADF micrograph ( b ) of APMT exposed for 24 h. The TEM sample was prepared from the one-sided cross-section seen in the upper micrographCC-BY · From the PDF
Fig. 10 STEM/EDX line profile (from A to B ) in Fig. 9 which reaches across the three layered oxide scale after 24 h of exposure
Fig. 10 STEM/EDX line profile (from A to B ) in Fig. 9 which reaches across the three layered oxide scale after 24 h of exposureCC-BY · From the PDF
Image 11
CC-BY · From the PDF
Image 12
CC-BY · From the PDF
Fig. 13 STEM-HAADF micrograph ( a ) and STEM-BF ( b ) of Kanthal Ò APMT exposed for 168 h
Fig. 13 STEM-HAADF micrograph ( a ) and STEM-BF ( b ) of Kanthal Ò APMT exposed for 168 hCC-BY · From the PDF
Fig. 14 In-situ TGA (mass gain vs. exposure time) at 600 ° C for up to 168 h (Fig. 14a). ln(mass gain)/ ln(time) plot of in situ TGA (mass gain vs. exposure time) in (Fig. 14b)
Fig. 14 In-situ TGA (mass gain vs. exposure time) at 600 ° C for up to 168 h (Fig. 14a). ln(mass gain)/ ln(time) plot of in situ TGA (mass gain vs. exposure time) in (Fig. 14b)CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 46 references

Research works printed but not linked: 1

  1. C. Pettersson, J. Pettersson, H. Asteman, J.-E. Svensson and L.-G. Johansson, Corrosion Science 48, 1368 (2005). · DOI · Paper page

Cited by

See all 54

Metadata

Authors
Israelsson, N., Unocic, K. A., Hellström, K., Jonsson, T., Norell, M., Svensson, J.-E., & Johansson, L.-G.
Affiliations
  • Chalmers University of Technology (SE)
  • Oak Ridge National Laboratory (US)
Corresponding author
Israelsson, N.
Venue
Oxidation of Metals
Published
2015-03-18
Volume
84
Issue
1-2
Pages
105-127
ISSN
  • 0030-770X (ISSN-L)
  • 1573-4889
OpenAlex
W1991279420
Cited by
54
References
45
Citations by year
2026: 4 · 2025: 1 · 2024: 9 · 2023: 8 · 2022: 5 · 2021: 6 · 2020: 3 · 2019: 7 · 2018: 5 · 2017: 3 · 2016: 1 · 2015: 2
FWCI
5.31
Type
journal article
Language
en
Open access
Locations
  • Oxidation of Metals (publishedVersion, cc-by)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion, other-oa)
  • Chalmers Research (Chalmers University of Technology) (submittedVersion)
Funders
  • U.S. Department of Energy
  • Basic Energy Sciences
Topics
  • Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
  • Physical Sciences › Materials Science › Metals and Alloys › Hydrogen embrittlement and corrosion behaviors in metals
  • Physical Sciences › Engineering › Mechanical Engineering › Intermetallics and Advanced Alloy Properties
Keywords
FeCrAl alloys, high-temperature corrosion, corrosion kinetics, microstructure, potassium chromate, iron oxide scale, alumina scale, oxide scale growth

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A Microstructural and Kinetic Investigation of the KCl-Induced Corrosion of an FeCrAl Alloy at 600 °C. https://app.cochat.ai/papers/10.1007/s11085-015-9546-3
The paper
Israelsson, N., Unocic, K. A., Hellström, K., Jonsson, T., Norell, M., Svensson, J.-E., & Johansson, L.-G. (2015). A Microstructural and Kinetic Investigation of the KCl-Induced Corrosion of an FeCrAl Alloy at 600 °C. Oxidation of Metals. https://doi.org/10.1007/s11085-015-9546-3

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.