Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index; 1 of the 19 sources its claims cite were checked for support.

Influence of pyrolysis temperature on lead immobilization by chemically modified coconut fiber-derived biochars in aqueous environments

Open access
Wu, Weidong, Li, Jianhong, Niazi, Nabeel Khan, Müller, Karin, Chu, Yingchao, Zhang, Lingling, Yuan, Guodong, Lu, Kouping, Song, Zhaoliang, Wang, Hailong · 2016 · Environmental Science and Pollution Research

Abstract

Biochar has received widespread attention as an eco-friendly and efficient material for immobilization of toxic heavy metals in aqueous environments. In the present study, three types of coconut fiber-derived biochars were obtained by pyrolyzing at three temperatures, i.e., 300, 500, and 700 °C. In addition, nine types of biochars were prepared by chemical modification with ammonia, hydrogen peroxide, and nitric acid, respectively, which were used to investigate changes in physico-chemical properties by inter alia, Fourier transformation infrared spectrophotometry (FTIR), scanning electron microscope (SEM), and BET specific surface area analysis. Batch sorption experiments were carried out to determine the sorption capacity of the biochars for lead (Pb) in aqueous solutions. Results showed that the cation exchange capacity of biochar pyrolyzed at 300 °C and modified with nitric acid increased threefold compared to the control. Loosely corrugated carbon surface and uneven carbon surface of the biochar pyrolyzed at 300 °C were produced during ammonia and nitric acid modifications. Removal rate of Pb by the coconut biochar pyrolyzed at 300 °C and modified with ammonia was increased from 71.8 to 99.6 % compared to the untreated biochar in aqueous solutions containing 100 mg L −1 Pb. However, chemical modification did not enhance adsorption of Pb of the biochars pyrolyzed at higher temperatures (e.g., 500 or 700 °C), indicating that resistance of biochars to chemical treatment increased with pyrolysis temperature.

Overview

CoChat Summary

TL;DR

Chemically modified coconut fiber-derived biochars were tested for Pb immobilization in aqueous solution, with pyrolysis temperature strongly affecting how much chemical modification changed biochar properties and Pb removal. Ammonia-modified biochar pyrolyzed at 300 °C raised Pb removal from 71.8 to 99.6% in a 100 mg L−1 Pb solution, while modifications of 500 and 700 °C biochars did not enhance Pb adsorption.

Key findings

  • Pb removal by coconut biochar pyrolyzed at 300 °C and modified with ammonia increased from 71.8 to 99.6% compared to the untreated biochar in aqueous solutions containing 100 mg L−1 Pb; CFB700 also removed 99.2% of Pb.
  • Nitric acid modification of the 300 °C biochar increased cation exchange capacity from 72.86 to 298.91 cmolc kg−1 (the abstract describes this as a threefold increase; the results state nearly four times).
  • Ammonia modification increased the specific surface area of the 300 °C biochar about twofold, from 4.495 to 8.856 m2 g−1.
  • Chemical modification did not enhance Pb adsorption for biochars pyrolyzed at 500 or 700 °C; all modification treatments of those biochars decreased Pb removal, indicating that resistance to chemical treatment increased with pyrolysis temperature.

Methods

  • Coconut fiber biochars were produced by pyrolysis at 300, 500, and 700 °C; nine modified biochars were prepared by treatment with 5% ammonia, 5% hydrogen peroxide, or 2 M nitric acid.
  • Biochars were characterized by ash content, pH, CEC, Boehm titration, elemental analysis, BET specific surface area, SEM, and FTIR.
  • Batch sorption experiments used 0.05 g biochar in 25 mL of 100 mg L−1 Pb solution with 0.01 M NaNO3 at pH 6, shaken for 24 h at 220 rpm and 25 °C; Pb was measured by AAS, experiments were run in triplicate, and differences were tested by factorial ANOVA with Duncan’s multiple range test at P < 0.05.

Limitations

  • The paper does not include a dedicated limitations section; it states that further studies will be conducted to quantify the adsorption capacities of these biochars for a range of contaminants.
  • Evident from the text: batch sorption was tested at only one initial Pb concentration (100 mg L−1), one pH (6), and one contact time (24 h), with no adsorption isotherm or kinetic modeling reported.
  • Evident from the text: tests used a synthetic Pb solution with NaNO3 background electrolyte, not real wastewater or column/field conditions.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1007/s11356-016-7428-0

Cites

27 of 27 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Fig. 1 FTIR analysis results of coconut fiber-derived biochars (CFBs) and chemically modified coconut fiber-derived biochars (MCFBs). The numbers of 300, 500, and 700 in the sample ID refer to the pyrolysis temperature 300, 500, and 700 °C, while the subscript, H2O2, NH3•H2O, and HNO3 refer to hydrogen peroxide, ammonia, and nitric acid-modified biochar, respectively
Fig. 1 FTIR analysis results of coconut fiber-derived biochars (CFBs) and chemically modified coconut fiber-derived biochars (MCFBs). The numbers of 300, 500, and 700 in the sample ID refer to the pyrolysis temperature 300, 500, and 700 °C, while the subscript, H2O2, NH3•H2O, and HNO3 refer to hydrogen peroxide, ammonia, and nitric acid-modified biochar, respectivelyCC BY · PubMed Central
Fig. 2 Sorption amount and removal rate of lead (Pb) by coconut fiber-derived biochars (CFBs) and chemically modified coconut fiber-derived biochars (MCFBs). The numbers of 300, 500, and 700 in the sample ID refer to the pyrolysis temperature 300, 500, and 700 °C, while the subscript, H2O2, NH3•H2O, and HNO3 refer to hydrogen peroxide, ammonia, and nitric acid-modified biochar, respectively
Fig. 2 Sorption amount and removal rate of lead (Pb) by coconut fiber-derived biochars (CFBs) and chemically modified coconut fiber-derived biochars (MCFBs). The numbers of 300, 500, and 700 in the sample ID refer to the pyrolysis temperature 300, 500, and 700 °C, while the subscript, H2O2, NH3•H2O, and HNO3 refer to hydrogen peroxide, ammonia, and nitric acid-modified biochar, respectivelyCC BY · PubMed Central

Verification

Claims the paper makes

1 Valid · 0 Not valid · 14 Not checked · 34 Own results and interpretations

13 more claims

Create a free account to see all 49 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 15
  • It may state two separate claims as one. 19

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

3 of 3

Citations

Cites

Show all 27 references

Research works printed but not linked: 2

  1. D1762-84 (2007) Standard test method for chemical analysis of wood charcoal. American Society for Testing and Materials, Conshohocken, PA
  2. Wang X, Zheng P, Pan L, Xiao T, Guo J, Zhang J, Liu Z, Zhang D (2015) Hainan coconut culture and the building and development of circular economy. Guangdong Chemical Engineering 42(10):78–79

Cited by

See all 89

Metadata

Authors
Wu, W., Li, J., Niazi, N. K., Müller, K., Chu, Y., Zhang, L., Yuan, G., Lu, K., Song, Z., & Wang, H.
Affiliations
  • Zhejiang A & F University (CN)
  • Hainan University (CN)
  • University of Bremen (DE)
  • Plant & Food Research (NZ)
  • Foshan University (CN)
Corresponding author
Wang, Hailong
Venue
Environmental Science and Pollution Research
Published
2016-08-29
Volume
23
Issue
22
Pages
22890-22896
ISSN
  • 0944-1344 (ISSN-L)
  • 1614-7499
OpenAlex
W2509278014
Cited by
89
References
27
Citations by year
2026: 7 · 2025: 6 · 2024: 5 · 2023: 14 · 2022: 7 · 2021: 13 · 2020: 10 · 2019: 7 · 2018: 11 · 2017: 7 · 2016: 2
FWCI
5.33
Type
journal article
Language
en
Open access
Locations
  • Environmental Science and Pollution Research (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
Funders
  • the National Natural Science Foundation of China (No. 21467007, No. 41271337)
  • National Natural Science Foundation of China (21577131)
Topics
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental remediation with nanomaterials
  • Physical Sciences › Environmental Science › Water Science and Technology › Coagulation and Flocculation Studies
Keywords
biochar, coconut fiber, pyrolysis temperature, lead immobilization, heavy metal adsorption, chemical modification, ammonia treatment, hydrogen peroxide treatment, nitric acid treatment, cation exchange capacity, aqueous solutions
MeSH terms
Adsorption, Charcoal, Cocos, Hot Temperature, Lead, Microscopy, Electron, Scanning, Solutions, Surface Properties, Water Pollutants, Chemical, Spectroscopy, Fourier Transform Infrared, Water Purification, Wastewater

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Influence of pyrolysis temperature on lead immobilization by chemically modified coconut fiber-derived biochars in aqueous environments. https://app.cochat.ai/papers/10.1007/s11356-016-7428-0
The paper
Wu, W., Li, J., Niazi, N. K., Müller, K., Chu, Y., Zhang, L., Yuan, G., Lu, K., Song, Z., & Wang, H. (2016). Influence of pyrolysis temperature on lead immobilization by chemically modified coconut fiber-derived biochars in aqueous environments. Environmental Science and Pollution Research. https://doi.org/10.1007/s11356-016-7428-0

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.