CoChat

Carbon capture of biochar produced by microwave co-pyrolysis: adsorption capacity, kinetics, and benefits

Huang, Yu-Fong, Chiueh, Pei-Te, Lo, Shang-Lien · 2022 · Environmental Science and Pollution Research

The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.

Abstract

Microwave co-pyrolysis of sewage sludge and leucaena wood was conducted to produce biochar as an adsorbent for CO 2 capture. Both microwave power level and blending ratio were crucial factors affecting the CO 2 adsorption capacity of biochar. At a power level of 150 W, the biochar produced by microwave co-pyrolysis of 25% sewage sludge and 75% leucaena wood possessed the highest CO 2 adsorption capacity. When the biochar was produced at 100 W, its CO 2 adsorption capacity was higher than predicted. Based on the proximate and elemental compositions of biochar, two equations were obtained to predict CO 2 adsorption capacity. The proximate composition of biochar can provide more precise prediction of CO 2 adsorption capacity than elemental composition according to the higher R 2 value provided. The blending ratio of 50% would be most appropriate to produce the biochar with acceptable reduction in CO 2 adsorption capacity and loss of quantity. The pseudo-second-order model would be most suitable for simulating the kinetic of CO 2 adsorption. The biochar produced from 1 metric tonne of sewage sludge and leucaena wood can offset carbon tax by 83 US dollars. Based on experimental results and findings, microwave co-pyrolysis should be a feasible technique to produce biochar possessing high CO 2 adsorption capacity.

Overview

Integrity signals

Registry

Crossref · 10.1007/s11356-022-23734-x

Cites

34 of 34 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 34 references

Research works printed but not linked: 3

  1. IPCC (2007) Climate change 2007: impacts, adaptation and vulnerability. Contribution of working group II to the fourth assessment report of the intergovernmental panel on climate change. Parry ML, Canziani OF, Palutikof JP, van der Linden PJ, Hanson CE, editors. Cambridge University Press, Cambridge, UK.
  2. Rashidi NA, Yusup S, Lam HL (2013b) Kinetic studies on carbon dioxide capture using activated carbon. Chem Eng Trans 35:361–366
  3. Vijayakumar G, Tamilarasan R, Dharmendirakumar M (2012) Adsorption, kinetic, equilibrium and thermodynamic studies on the removal of basic dye Rhodamine-B from aqueous solution by the use of natural adsorbent perlite. J Mater Environ Sci 3:157–170

Cited by

See all 24

Metadata

Authors
Huang, Y.-F., Chiueh, P.-T., & Lo, S.-L.
Affiliations
National Taiwan University (TW)
Corresponding author
Lo, Shang-Lien
Venue
Environmental Science and Pollution Research
Published
2022-10-25
Volume
30
Issue
9
Pages
22211-22221
ISSN
  • 0944-1344 (ISSN-L)
  • 1614-7499
OpenAlex
W4307185318
Cited by
24
References
34
Citations by year
2026: 4 · 2025: 6 · 2024: 10 · 2023: 4
FWCI
1.89
Type
journal article
Language
en
Open access
closed
Licence
Locations
  • Environmental Science and Pollution Research (publishedVersion)
  • PubMed (publishedVersion)
Funders
Ministry of Science and Technology, Taiwan (111-2221-E-002-038)
Topics
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
Keywords
biochar, CO2 capture, sewage sludge, adsorption capacity, adsorption kinetics, pseudo-second-order kinetics, proximate composition, elemental composition, blend ratio, microwave power level
MeSH terms
Pyrolysis, Adsorption, Carbon, Carbon Dioxide, Charcoal, Kinetics, Microwaves, Sewage

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Carbon capture of biochar produced by microwave co-pyrolysis: adsorption capacity, kinetics, and benefits. https://app.cochat.ai/papers/10.1007/s11356-022-23734-x
The paper
Huang, Y.-F., Chiueh, P.-T., & Lo, S.-L. (2022). Carbon capture of biochar produced by microwave co-pyrolysis: adsorption capacity, kinetics, and benefits. Environmental Science and Pollution Research. https://doi.org/10.1007/s11356-022-23734-x

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.