The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Environmental impact assessment of aviation emission reduction through the implementation of composite materials
Open accessAbstract
PurposeCarbon-fibre-reinforced polymers (CFRP) have been developed by the aviation industry to reduce aircraft fuel burn and emissions of greenhouse gases. This study presents a life cycle assessment (LCA) of an all-composite airplane, based on a Boeing 787 Dreamliner. The global transition of aircraft to those of composite architecture is estimated to contribute 20–25 % of industry CO2 reduction targets. A secondary stage of the cradle-to-grave analysis expands the study from an individual aircraft to the global fleet.MethodsAn LCA was undertaken utilising SimaPro 7.2 in combination with Ecoinvent. Eco-indicator 99 (E) V2.05 Europe EI 99 E/E was the chosen method to calculate the environmental impact of the inventory data. The previously developed aviation integrated model was utilised to construct a scenario analysis of the introduction of composite aircraft against a baseline projection, through to 2050, to model CO2 emissions due to their particular relevance in the aviation sector.Results and discussionThe analysis demonstrated CFRP structure results in a reduced single score environmental impact, despite the higher environmental impact in the manufacturing phase, due to the increased fossil fuel use. Of particular importance is that CFRP scenario quickly achieved a reduction in CO2 and NOx atmospheric emissions over its lifetime, due to the reduced fuel consumption. The modelled fleet-wide CO2 reduction of 14–15 % is less than the quoted emission savings of an individual aircraft (20 %) because of the limited fleet penetration by 2050 and the increased demand for air travel due to lower operating costs.ConclusionsThe introduction of aircraft based on composite material architecture has significant environmental benefits over their lifetime compared to conventional aluminium-based architecture, particularly with regards to CO2 and NOx a result of reduced fuel burn. The constructed scenario analyses the interactions of technology and the markets they are applied in, expanding on the LCA, in this case, an observed fleet-wide reduction of CO2 emission of 14–15 % compared to an individual aircraft of 20 %.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
THE INTERGOVERNMENTAL PANEL ON CLIMATE CHANGE
Shine, K. (1990) · Weather · doi:10.1002/j.1477-8696.1990.tb05660.x · Cited by 5,462
Rebitzer, G., Ekvall, T., Frischknecht, R., Hunkeler, D., Norris, G., Rydberg, T., Schmidt, W.-P., Suh, S., Weidema, B. P., & Pennington, D. W. (2004) · Environment International · doi:10.1016/j.envint.2003.11.005 · Cited by 2,753
Climate change 2014 : mitigation of climate change
Edenhofer, O., Pichs-Madruga, R., & Sokona, Y. (2014) · University of North Texas Digital Library (University of North Texas) · Cited by 1,637
Environmental management. Life cycle assessment. Principles and framework
(2015) · doi:10.3403/01139131u · Cited by 1,286
Recycling technologies for thermoset composite materials—current status
Pickering, S. J. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.030 · Cited by 1,278
Aviation and the Global Atmosphere
Penner, J. E., Lister, D. H., Griggs, E. J., Dokken, D. J., & McFarland, M. (1999) · Cited by 749
(2008) · Choice Reviews Online · doi:10.5860/choice.45-5006 · Cited by 594
Manufacturing Technology for Aerospace Structural Materials
(2006) · Elsevier eBooks · doi:10.1016/b978-1-85617-495-4.x5000-8 · Cited by 516
Scenarios of Greenhouse Gas Emissions and Atmospheric Concentrations
Clarke, L., Edmonds, J., Jacoby, H. D., Reilly, J. M., & Richels, R. (2007) · Lincoln (University of Nebraska) · Cited by 419
Witik, R. A., Teuscher, R., Michaud, V., Ludwig, C., & Månson, J.-A. E. (2013) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.02.009 · Cited by 408
Cited by
Metal additive manufacturing in the commercial aviation industry: A review
Gisario, A., Kazarian, M., Martina, F., & Mehrpouya, M. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.08.005 · Cited by 574
Rapid energy-efficient manufacturing of polymers and composites via frontal polymerization
Robertson, I. D., Yourdkhani, M., Centellas, P. J., Aw, J. E., Ivanoff, D. G., Goli, E., Lloyd, E. M., Dean, L. M., Sottos, N. R., Geubelle, P. H., et al. (2018) · Nature · doi:10.1038/s41586-018-0054-x · Cited by 527
Khalid, M. Y., Arif, Z. U., Ahmed, W., & Arshad, H. (2022) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2021.e00382 · Cited by 314
A comprehensive framework for estimating aircraft fuel consumption based on flight trajectories
Zhang, L., Bian, L., Jiang, C., & Wu, L. (2025) · Transportation Research Part E: Logistics and Transportation Review · doi:10.1016/j.tre.2025.104339 · Cited by 10
Metadata
- Authors
- Timmis, A. J., Hodzic, A., Koh, L., Bonner, M., Soutis, C., Schäfer, A. W., & Dray, L.
- Venue
- The International Journal of Life Cycle Assessment
- Published
- 2014-11-27
- Volume
- 20
- Issue
- 2
- Pages
- 233-243
- ISSN
- 0948-3349 (ISSN-L)
- 1614-7502
- OpenAlex
- W1988449304
- Cited by
- 278
- References
- 20
- FWCI
- 5.43
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Environmental impact assessment of aviation emission reduction through the implementation of composite materials. https://app.cochat.ai/papers/10.1007/s11367-014-0824-0
- The paper
- Timmis, A. J., Hodzic, A., Koh, L., Bonner, M., Soutis, C., Schäfer, A. W., & Dray, L. (2015). Environmental impact assessment of aviation emission reduction through the implementation of composite materials. The International Journal of Life Cycle Assessment. https://doi.org/10.1007/s11367-014-0824-0
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.