Methods for global sensitivity analysis in life cycle assessment
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Input parameters required to quantify environmental impact in life cycle assessment (LCA) can be uncertain due to e.g. temporal variability or unknowns about the true value of emission factors. Uncertainty of environmental impact can be analysed by means of a global sensitivity analysis to gain more insight into output variance. This study aimed to (1) give insight into and (2) compare methods for global sensitivity analysis in life cycle assessment, with a focus on the inventory stage. Five methods that quantify the contribution to output variance were evaluated: squared standardized regression coefficient, squared Spearman correlation coefficient, key issue analysis, Sobol’ indices and random balance design. To be able to compare the performance of global sensitivity methods, two case studies were constructed: one small hypothetical case study describing electricity production that is sensitive to a small change in the input parameters and a large case study describing a production system of a northeast Atlantic fishery. Input parameters with relative small and large input uncertainties were constructed. The comparison of the sensitivity methods was based on four aspects: (I) sampling design, (II) output variance, (III) explained variance and (IV) contribution to output variance of individual input parameters. The evaluation of the sampling design (I) relates to the computational effort of a sensitivity method. Key issue analysis does not make use of sampling and was fastest, whereas the Sobol’ method had to generate two sampling matrices and, therefore, was slowest. The total output variance (II) resulted in approximately the same output variance for each method, except for key issue analysis, which underestimated the variance especially for high input uncertainties. The explained variance (III) and contribution to variance (IV) for small input uncertainties were optimally quantified by the squared standardized regression coefficients and the main Sobol’ index. For large input uncertainties, Spearman correlation coefficients and the Sobol’ indices performed best. The comparison, however, was based on two case studies only. Most methods for global sensitivity analysis performed equally well, especially for relatively small input uncertainties. When restricted to the assumptions that quantification of environmental impact in LCAs behaves linearly, squared standardized regression coefficients, squared Spearman correlation coefficients, Sobol’ indices or key issue analysis can be used for global sensitivity analysis. The choice for one of the methods depends on the available data, the magnitude of the uncertainties of data and the aim of the study.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Global sensitivity indices for nonlinear mathematical models and their monte carlo estimates
Sobol′, I. M. (2001) · Mathematics and Computers in Simulation · doi:10.1016/s0378-4754(00)00270-6 · Cited by 6,389
The Design and Implementation of FFTW3
Frigo, M., & Johnson, S. G. (2005) · Proceedings of the IEEE · doi:10.1109/jproc.2004.840301 · Cited by 5,086
Saltelli, A., Annoni, P., Azzini, I., Campolongo, F., Ratto, M., & Tarantola, S. (2010) · Computer Physics Communications · doi:10.1016/j.cpc.2009.09.018 · Cited by 3,623
A Quantitative Model-Independent Method for Global Sensitivity Analysis of Model Output
Saltelli, A., Tarantola, S., & Chan, K. P.-S. (1999) · Technometrics · doi:10.1080/00401706.1999.10485594 · Cited by 2,275
Impact of lifetime on US residential building LCA results
Aktas, C. B., & Bilec, M. M. (2012) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-011-0363-x · Cited by 208
Cited by
How to treat uncertainties in life cycle assessment studies?
Igos, E., Benetto, E., Meyer, R., Baustert, P., & Othoniel, B. (2019) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-018-1477-1 · Cited by 443
Gámez-García, D. C., Gómez-Soberón, J. M., Corral-Higuera, R., Saldaña-Márquez, H., Gómez-Soberón, M. C., & Arredondo-Rea, S. P. (2018) · Sustainability · doi:10.3390/su10082748 · Cited by 35
Metadata
- Authors
- Groen, E. A., Bokkers, E. A. M., Heijungs, R., & de Boer, I. J. M.
- Venue
- The International Journal of Life Cycle Assessment
- Published
- 2016-11-28
- Volume
- 22
- Issue
- 7
- Pages
- 1125-1137
- ISSN
- 0948-3349 (ISSN-L)
- 1614-7502
- OpenAlex
- W2559041644
- Cited by
- 193
- References
- 5
- FWCI
- 5.93
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Methods for global sensitivity analysis in life cycle assessment. https://app.cochat.ai/papers/10.1007/s11367-016-1217-3
- The paper
- Groen, E. A., Bokkers, E. A. M., Heijungs, R., & de Boer, I. J. M. (2017). Methods for global sensitivity analysis in life cycle assessment. The International Journal of Life Cycle Assessment. https://doi.org/10.1007/s11367-016-1217-3
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.