CoChat

Calculating the energy and water use in food processing and assessing the resulting impacts

Open access
Walker, Christie, Beretta, Claudio, Sanjuán, Neus, Hellweg, Stefanie · 2018 · The International Journal of Life Cycle Assessment

The DOI matches its Crossref record; 36 of the 38 references it cites were found in a registry or an index.

Abstract

PurposeThe food processing industry is a major consumer of energy and water, the consumption of which has environmental impacts. This work develops a method to determine process-specific water use and utilizes an existing energy use toolbox to calculate the energy and water required for each step of food processing. A life cycle assessment (LCA) is conducted to determine how much processing contributes to a particular product’s cradle to gate impacts for two impact categories.MethodsA method to determine water use at each unit process was developed, and in conjunction with an already developed energy use unit process toolbox, the methods were tested using two case studies. Processing data such as flow rates, operation temperatures, and food losses were used from two Swiss food production facilities. Calculation results were compared to measured facility data such as yearly energy and water use. Results were then used to develop LCAs for a total of seven food products, including five types of juice and two types of potato products.Results and discussionThe toolboxes were able to calculate the water use of both facilities within 25%, the thermal energy use within 9%, and electricity use within 24%. Impacts from processing were particularly important for the potato products, particularly potato flakes, due to impacts stemming from thermal energy use. For juices, impacts due to raw material growth dominate the LCA, and impacts due to processing are much less significant. A unit process analysis may not be necessary when there is little variation in the unit processes between the different products. In this case, a simple allocation of measured facility energy and water data may be sufficient for calculating the impacts associated with processing. However, products with largely varying unit processes may have very different impacts. Impacts are sensitive to the type of energy required (thermal or electrical) and the sources of electricity and water.ConclusionsThese water and energy toolboxes can improve transparency in processing and identify the most water- and energy-intensive steps; however, in facilities with similar products, such an extensive analysis may not be necessary. Results from these calculations are useful in developing food product LCAs.

Overview

Integrity signals

Registry

Crossref · 10.1007/s11367-017-1327-6

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 36 references

Research works printed but not linked: 6

  1. BREF (2006) Reference document on the best available techniques in the food, drink and milk industries. European Commission, Seville
  2. East Bay Municipal Utility District (2008) Watersmart guidebook: a water-use efficiency plan, Review Guide for New Businesses. Retrieved from: http://www.ebmud.com/ . Accessed 29 Jan 2015
  3. Fellows P (2009) Food processing technology principles and practices, 3nd edn. CRC Press, Boca Raton
  4. International Dairy Federation (2010) Bulletin of the IDF N° 479/ 2015: A common carbon footprint approach for dairy: the IDF guide to standard lifecycle assessment methodology for the dairy sector. Retrieved from: http://store.fil-idf.org/product/a-common-carbon-footprint-approach-for-the-dairy-sector-the-idf-guide-to-standard-life-cycle-assessment-methodology/ . Accessed 10 Aug 2015
  5. Ölmez H (2014) Water consumption, reuse and reduction strategies in food processing. In: Tiwari BK, Norton T, Holden NM (eds) Sustainable food processing. John Wiley & Sons, Ltd, Chichester, pp 401–434
  6. Tokos H, Glavič P (2007) Minimisation of freshwater consumption in brewery. University of Maribor, Chemical Engineering Department, Slovenia. Retrieved from: http://folk.ntnu.no/skoge/prost/proceedings/icheap8-pres07/pres07webpapers/93%20Tokos.pdf . Accessed 10 Aug 2015

Cited by

See all 28

Metadata

Authors
Walker, C., Beretta, C., Sanjuán, N., & Hellweg, S.
Affiliations
  • ETH Zurich (CH)
  • Universitat Politècnica de València (ES)
Corresponding author
Walker, Christie
Venue
The International Journal of Life Cycle Assessment
Published
2017-06-12
Volume
23
Issue
4
Pages
824-839
ISSN
  • 0948-3349 (ISSN-L)
  • 1614-7502
OpenAlex
W2625376672
Cited by
24
References
38
Citations by year
2026: 1 · 2025: 1 · 2023: 7 · 2022: 5 · 2021: 5 · 2020: 2 · 2019: 1 · 2018: 1 · 2017: 1
FWCI
0.77
Type
journal article
Language
en
Open access
Locations
  • The International Journal of Life Cycle Assessment (publishedVersion)
  • RiuNet (Universitat Politècnica de València) (submittedVersion, cc-by-nc-nd)
  • Repository for Publications and Research Data (ETH Zurich) (submittedVersion, other-oa)
  • ETH Zürich Research Collection
Topics
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
  • Physical Sciences › Environmental Science › Ecology › Agriculture Sustainability and Environmental Impact
  • Physical Sciences › Environmental Science › Water Science and Technology › Water-Energy-Food Nexus Studies
Keywords
food processing, energy consumption, water consumption, juice, potato products, potato flakes, thermal energy, power consumption, food loss, environmental impact of food production

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Calculating the energy and water use in food processing and assessing the resulting impacts. https://app.cochat.ai/papers/10.1007/s11367-017-1327-6
The paper
Walker, C., Beretta, C., Sanjuán, N., & Hellweg, S. (2018). Calculating the energy and water use in food processing and assessing the resulting impacts. The International Journal of Life Cycle Assessment. https://doi.org/10.1007/s11367-017-1327-6

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.