The DOI matches its Crossref record; 95 of the 95 references it cites were found in a registry or an index.
Prospective sustainability assessment: the case of wood in automotive applications
Open accessAbstract
Purpose: The introduction of renewable materials into automotive applications is perceived as an innovative lightweight solution. Wood-based materials are advantageous in that they have potentially lower environmental impacts as compared with other materials such as steel. However, using wood per se does not automatically ensure more sustainability. Few prospective sustainability assessment methods or studies on the use of wood-based materials in automotive applications have been carried out, although these are needed to reduce unintended, negative sustainability effects and to support sustainable oriented research and innovation. Therefore, this study was conducted to assess the potential sustainability effects and consequences of introducing a wood-based component into an automotive application. Methods: A combination of methods was used to analyze the potential sustainability effects when introducing wood into automotive applications. This prospective life cycle sustainability analysis solely relied on secondary data. The environmental impacts were analyzed using a simplified environmental life cycle assessment on the product level. A multi-regional input-output-based assessment was conducted to model the country-specific environmental and socioeconomic consequences. The potential shift in social risks and opportunities on a national scale was analyzed by conducting a generic social life cycle assessment. Various aspects of each approach differ, with each providing a specific perspective of the system under study. Results and discussion: The results indicate that implementing wood into automotive application can have environmental, social, and economic benefits, according to most of the indicators analyzed. Mostly due to the product weight reduction due to the use of a wood-based component, the results show that environmental impacts decrease. Some possible consequences of using wood-based materials are increased value added and increasing the number of jobs in European countries. Similarly, the social risks and opportunities are shifted from countries all over the world to European countries, which perform better than developing countries according to several indicators. However, some indicators, such as migrant acceptance or local supplier quantity, perform better in the current situation. Conclusions: The presented case study is particularly notable, because the results clearly indicate the advantages of using wood-based materials in automotive applications, although the application of such relatively holistic and complex approaches often may lead to rather indifferent pictures. Policy makers, researchers, and companies can apply this combination of methods that rely solely on generic data to obtain both feasible and informative results. These methods also allow users to link the product level assessment with a regional and social perspective and screen critical topics to support sustainability research and innovation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“This is also aligned with previous case studies on the substitution of steel-based systems with wood-based resources [62].”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Input-output analysis foundations and extensions
Miller, R. E., & Blair, P. D. (2009) · Cited by 5,083
Klüppel, H.-J. (2005) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2005.03.001 · Cited by 4,639
ReCiPe2016: a harmonised life cycle impact assessment method at midpoint and endpoint level
Huijbregts, M. A. J., Steinmann, Z. J. N., Elshout, P. M. F., Stam, G., Verones, F., Vieira, M., Zijp, M., Hollander, A., & van Zelm, R. (2017) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1246-y · Cited by 4,485
Anthropogenic and Natural Radiative Forcing
(2014) · Climate Change 2013 – The Physical Science Basis · doi:10.1017/cbo9781107415324.018 · Cited by 3,683 · cited 1×
“Emissions to air are presented as CO2 equivalents using the IPCC 100-year time horizon GWP factors (Myhre et al. 2014).”
MethodRecent developments in life cycle assessment
Finnveden, G., Hauschild, M. Z., Ekvall, T., Guinée, J., Heijungs, R., Hellweg, S., Koehler, A., Pennington, D., & Suh, S. (2009) · Journal of Environmental Management · doi:10.1016/j.jenvman.2009.06.018 · Cited by 3,444
Input-Output Analysis: Foundations and Extensions
Miller, R. E., & Blair, P. D. (2021) · Cambridge University Press eBooks · doi:10.1017/9781108676212 · Cited by 2,826 · cited 1×
“1) (Miller and Blair 2009) x ¼ I−Að Þ−1y ð1Þ where x is themn-by-1 total output vector of the n sectors inm countries, I is anmn-by-mn identity matrix,A =Z diag(x)−1 is the mn-by-mn input coefficient matrix, y = Yι is the mn-by-1 final consumption vector enclosing the aggregated consumption of the…”
BackgroundTimmer, M. P., Dietzenbacher, E., Los, B., Stehrer, R., & de Vries, G. J. (2015) · Review of International Economics · doi:10.1111/roie.12178 · Cited by 2,448
An overview of sustainability assessment methodologies
Singh, R. K., Murty, H. R., Gupta, S. K., & Dikshit, A. K. (2009) · Ecological Indicators · doi:10.1016/j.ecolind.2008.05.011 · Cited by 2,069 · cited 1×
“In general, assessing the sustainability of products involves considering their environmental, social, and economic aspects (Hunkeler and Rebitzer 2005; Singh et al. 2012).”
BackgroundLife Cycle Assessment: Past, Present, and Future
Guinée, J. B., Heijungs, R., Huppes, G., Zamagni, A., Masoni, P., Buonamici, R., Ekvall, T., & Rydberg, T. (2011) · Environmental Science & Technology · doi:10.1021/es101316v · Cited by 1,692
Research works printed but not linked: 5
- Brooke AL (2008) Ford model T: the car that put the world on wheels. Motorbooks, St. Paul
- EC (2010) ILCD Handbook. General guide for life cycle assessment. detailed guidance 1st edition. European Commission. Joint Reserach Center. Luxembourg. Accessed 17 Jan 2019
- Messmer A (2015) Life cycle assessment of adhesives used in wood constructions. Master Thesis, ETH Zurich
- Müller U, Feist F, Jost T (2019b) Holzverbundwerkstoffe im Automobilbau der Zukunft? Holztechnol 1:5–15
- Norris GA, Benoît-Norris C (2015) Chapter 8: The social hotspots database context of the SHDB. In: Murray J, Mcbain D, Wiedmann T (eds) Common Ground Publishing: Campaign, IL, USA, pp 52–73
Cited by
Kangishwar, S., Radhika, N., Sheik, A. A., Chavali, A., & Hariharan, S. (2023) · Polymer Bulletin · doi:10.1007/s00289-022-04087-4 · Cited by 184
How Green are Redox Flow Batteries?
Ebner, S., Spirk, S., Stern, T., & Mair‐Bauernfeind, C. (2023) · ChemSusChem · doi:10.1002/cssc.202201818 · Cited by 56
Self-citationNurdiawati, A., Mir, B. A., & Al‐Ghamdi, S. G. (2025) · Resources Environment and Sustainability · doi:10.1016/j.resenv.2025.100203 · Cited by 83
Prospective LCA towards achieving carbon neutrality goals: Framework application and challenges
Fang, Y., Wu, P.-Z., Chen, S., Li, Y., Cui, S.-F., Zhu, J., Cao, H.-Z., Jiang, K., & Zhong, L. (2024) · Environmental Impact Assessment Review · doi:10.1016/j.eiar.2024.107733 · Cited by 40
Fürtner, D., Ranacher, L., Echenique, E. A. P., Schwarzbauer, P., & Hesser, F. (2021) · BioEnergy Research · doi:10.1007/s12155-021-10261-9 · Cited by 34
Metadata
- Authors
- Mair-Bauernfeind, C., Zimek, M., Asada, R., Bauernfeind, D., Baumgartner, R. J., & Stern, T.
- Affiliations
- University of Graz (AT)
- Flatiron Institute (US)
- Venue
- The International Journal of Life Cycle Assessment
- Published
- 2020-08-24
- Volume
- 25
- Issue
- 10
- Pages
- 2027-2049
- ISSN
- 0948-3349 (ISSN-L)
- 1614-7502
- OpenAlex
- W3080929527
- Cited by
- 38
- References
- 94
- Citations by year
- 2026: 6 · 2025: 10 · 2024: 6 · 2023: 8 · 2022: 3 · 2021: 4 · 2020: 1
- FWCI
- 1.44
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- The International Journal of Life Cycle Assessment (publishedVersion, cc-by)
- Funders
- Österreichische Forschungsförderungsgesellschaft (861421)
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Physical Sciences › Environmental Science › Management, Monitoring, Policy and Law › Environmental and Social Impact Assessments
- Physical Sciences › Materials Science › General Materials Science › Material Selection and Properties
- Keywords
- wood products, automotive applications, life cycle sustainability assessment, lightweight materials, environmental impact, social life cycle assessment, multi-regional input-output analysis, socio-economic impacts, value added, job creation, local suppliers, renewable materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Prospective sustainability assessment: the case of wood in automotive applications. https://app.cochat.ai/papers/10.1007/s11367-020-01803-y
- The paper
- Mair-Bauernfeind, C., Zimek, M., Asada, R., Bauernfeind, D., Baumgartner, R. J., & Stern, T. (2020). Prospective sustainability assessment: the case of wood in automotive applications. The International Journal of Life Cycle Assessment. https://doi.org/10.1007/s11367-020-01803-y
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.