The DOI matches its Crossref record; 62 of the 63 references it cites were found in a registry or an index; 25 of the 62 sources its claims cite were checked for support.
Integrating Regionalized Socioeconomic Considerations onto Life Cycle Assessment for Evaluating Bioeconomy Value Chains: A Case Study on Hybrid Wood–Concrete Ceiling Elements
Open accessAbstract
As bioeconomy strategies strive to integrate industrial sectors for achieving innovative materials alternative to the ones produced from non-renewable resources, the development of monitoring systems and tools to assess the implementation of such value chains is still a work in progress. This work intended to integrate the traditional life cycle assessment with a regionalized social life cycle assessment method to evaluate alternative production scenarios of a hybrid construction system with a wood-based lightweight concrete panel as a core component currently in its final stages of technical development. The life cycle impact assessment was carried out by comparing the relative advantages of two product development scenarios against the reference system’s results. The social life cycle assessment was carried out using the model “REgional SPecific cONtextualised Social life cycle Assessment” (RESPONSA), which was developed for assessing wood-based value chains under a regional scope. The results showed that both alternative scenarios present large advantages when compared to the reference system. Moreover, the implementation of the production value chain was found to imply positive socioeconomic advantages in the region, in particular, due to the quality of the jobs found in the organizations associated with the production system.
Overview
CoChat Summary
TL;DR
This study integrates environmental life cycle assessment (LCA) with the regionalized social LCA model RESPONSA to evaluate two hybrid wood–concrete ceiling demonstrators against a prefabricated concrete reference in Central Germany. Both demonstrators showed large environmental advantages over the reference in most impact categories, while the social assessment identified regional socioeconomic hotspots, especially knowledge capital, alongside positive job-quality potential.
Key findings
- Both alternative scenarios outscored the reference system in most evaluated indicators; relative advantages were over 90% for climate change, resources utilization, and acidification terrestrial and drinking water, while most indicators lay between 25 and 80%. Only four categories showed less favorable outcomes: water use (2%), freshwater eutrophication (9%), land use (3%), and ionizing radiation (13%).
- The two alternative scenarios behaved identically, with a difference in relative advantages of less than 5–10% in all evaluated indicators, within basic uncertainties; the authors state it was not possible to determine the better alternative at this stage.
- In the regionalized sLCA, O1 performed well above the regional benchmark, exceeding average socioeconomic performance in the three indices related to an adequate working environment. O2 was below the regional average for “adequate remuneration” and “employment,” and O3 was average-to-good except for “knowledge capital,” which was below the regional benchmark.
- Overall, the worst evaluated index was “knowledge capital,” considered a hotspot throughout the assessed value chain; the implementation of the production value chain was found to imply positive socioeconomic advantages in the region, particularly due to job quality in the associated organizations.
Methods
- The study combined an environmental LCA with a regionalized social LCA using the RESPONSA model for a hybrid wood–concrete construction system in Central Germany. Two demonstrators differed by wood fraction: demonstrator 1 used wood flakes from a disc flaker process, and demonstrator 2 used wood fibers from a refiner process; both were compared against prefabricated concrete elements without wood constituents.
- The LCA was cradle-to-factory gate, modeled in GaBi, with a functional unit of 30.6 m² and a thickness of 250 mm. Impact assessment used EN15804 endpoint indicators based on Environmental Footprint EF 3.0, covering 15 impact categories, and relative advantages were calculated against the reference product.
- The sLCA used RESPONSA indicators and performance reference points for three organizations: O1 (forest operations and logistics management), O2 (a sawmill facility in Central Germany), and O3 (a structural precast concrete element production facility). Data came from a primary dataset, literature, the RESPONSA database, and regional social archetypes.
Limitations
- Stated: there is persisting uncertainty due to scaling effects from semi-industrial scale to full industrial scale; the authors suggest addressing this with development scenarios for energy integration and industrial symbiosis.
- Stated: the RESPONSA model lacks datasets, and access to official data can be a barrier because the model requires highly disaggregated information; if few companies participate in a regional sector, a checking protocol is needed to prevent tracing data back to individual companies.
- Stated: RESPONSA currently works with indices related to “workers” and “local community,” and expansion is needed for “society,” “consumers,” and “value chain actors.” The LCA also only evaluated cradle-to-factory gate, excluding end-of-life, modular building concepts, and reuse strategies. Evident from the text: because both demonstrator alternatives involve the same organizations, the sLCA results are alike for both alternatives and cannot differentiate their social performance.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Methodological approach for the evaluation of the social performance of the organizations associated with the case study (adapted from ref. [38]). Figure 2. Methodological approach for the evaluation of the social performance of the organizations associated with the case study (adapted from ref. [38]).](https://figures.cochat.ai/paper-figures/13b03e3f93ef45eeab51c5f3a6b58b03/integrating-regionalized-socioeconomic-considerations-onto-life-cycle-assessment-figure-2.png)


![Figure 5 Hot spot analysis of the value chain associated with the production of the HBV hybrid construction system. Assessment scale as defined by Siebert et al. (Adapted from ref. [38,50]) Figure 5. Hot spot analysis of the value chain associated with the production of the HBV hybrid construction system. Assessment scale as defined by Siebert et al. (Adapted from ref. [38,50]).](https://figures.cochat.ai/paper-figures/8b131b68fe4841669d9390a9539d4fac/integrating-regionalized-socioeconomic-considerations-onto-life-cycle-assessment-figure-5.png)
Verification
Claims the paper makes
11 Valid · 4 Not valid · 12 Not checked · 42 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Wood and timber construction products are far more energy and resource-efficient in the extraction and processing of raw materials than conventional fossil materials used in the construction sector.”
What the sources say
- Partly supportedcites [17] Chen, Z.J., Gu, H.M., Bergman, R.D., and Liang, S.B. (2020). Comparative life-cycle assessment of a high-rise mass timber building with an equivalent reinforced concrete alternative using the athena impact estimator for buildings. Sustainability, 12. sourceExperimental — accuracy not yet measured
Section 3.1 (p. 5) finds that the mass-timber building used less structural material by mass than the equivalent reinforced-concrete building. Section 3.3.2 (p. 9) reports lower greenhouse-gas emissions for the timber building during the product stage, which includes extraction and manufacturing. These building-level findings do not establish that wood products themselves are far more energy- and resource-efficient specifically in raw-material extraction and processing. (LLM, conf=0.84)
- Not checked — no full text of the sourcecites [18] Guo, 2020, Hydration of portland cement pastes containing untreated and treated hemp powders, J. Mater. Civ. Eng. source
- Not checked — no full text of the sourcecites [19] Jaaranen, 2020, Frictional behaviour of timber-concrete contact pairs, Constr. Build. Mater. source
- Could not verifycites [20] Munoz-Ruiperez, C., Olivan, F.F., Carpintero, V.C., Santamaria-Vicario, I., and Saiz, A.R. (2020). Mechanical behavior of a composite lightweight slab, consisting of a laminated wooden joist and ecological mortar. Materials, 13. sourceExperimental — accuracy not yet measured
The Introduction discusses the construction industry's resource use and describes a slab made with wooden joists and recycled-aggregate mortar. It does not compare the energy or resource demands of extracting and processing timber with those of conventional fossil-derived materials; searches for that comparison found no passage. (LLM, conf=0.74)
- Not matchedcites [21] Villas-Boas, B.T., Iwakiri, S., and Parchen, C.F.A. (2020). Production and evaluation of low-density cast-wood-cement blocks for civil construction. Science, 48.
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“the case of wood-concrete systems may differ as they in some cases exhibit even higher environmental impacts as they lack in optimized substitution of cement [52-57].”
What the sources say
- Not checked — no full text of the sourcecites [52] Zhou, 2018, Comparative environmental life cycle assessment of fiber reinforced cement panel between kenaf and glass fibers, J. Clean. Prod. source
- Not checked — no full text of the sourcecites [53] Wu, 2020, Preliminary sensitivity study on an life cycle assessment (lca) tool via assessing a hybrid timber building, J. Bioresour. Bioprod. source
- Could not verifycites [54] Nikolić Topalović, M., Stanković, M., Ćirović, G., and Pamučar, D. (2018). Comparison of the applied measures on the simulated scenarios for the sustainable building construction through carbon footprint emissions—case study of building construction in serbia. Sustainability, 10. sourceExperimental — accuracy not yet measured
The Introduction (p. 1) discusses cement’s contribution to CO₂ emissions, but does not compare wood-concrete with fully wood-based systems or discuss optimized cement substitution. The Conclusions (p. 15) describe scenarios varying insulation and façade carpentry instead. Searches for wood-concrete systems and cement substitution found no passage addressing the claimed comparison. (LLM, conf=0.75)
- Could not verifycites [55] Gámez-García, D.C., Gómez-Soberón, J.M., Corral-Higuera, R., Saldaña-Márquez, H., Gómez-Soberón, M.C., and Arredondo-Rea, S.P. (2018). A cradle to handover life cycle assessment of external walls: Choice of materials and prognosis of elements. Sustainability, 10. sourceExperimental — accuracy not yet measured
Section 5.3 (p. 12) compares ceramic-clay and mortar wall pieces and notes the cement content of mortar pieces. Section 5.2 (p. 11) discusses lighter walls and binder optimization, but neither section compares wood-concrete with fully wood-based systems or links their impacts to a lack of optimized cement substitution. Searches for those materials and cement substitution found no passage addressing the claim. (LLM, conf=0.76)
- Could not verifycites [56] Caruso, M., Pinho, R., Bianchi, F., Cavalieri, F., and Lemmo, M.T. (2020). A life cycle framework for the identification of optimal building renovation strategies considering economic and environmental impacts. Sustainability, 12. sourceExperimental — accuracy not yet measured
The Introduction (p. 2) discusses reinforced-concrete buildings, and the General Workflow (p. 8) models renovation of a reinforced-concrete frame. Neither compares wood-concrete systems with fully wood-based systems or links their environmental impacts to cement substitution. Searches for wood-concrete, timber, and cement found no passage addressing that claim. (LLM, conf=0.76)
- Not checked — no full text of the sourcecites [57] Scope, 2020, In Aiming for Life Cycle Sustainability Assessment of Cement-Based Composites: A Trend Study for Wall Systems of Carbon Concrete; Dresden nexus conference 2020—session 4—circular economy for building with secondary construction materials to minimise resource use and land use, Civ. Eng. Des. source
hedgedstates a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Whereas fully wood-based building systems outperform steel-reinforced concrete systems normally in the range of 10-55% in most environmental impact categories”
What the sources say
- Not checked — no full text of the sourcecites [52] Zhou, 2018, Comparative environmental life cycle assessment of fiber reinforced cement panel between kenaf and glass fibers, J. Clean. Prod. source
- Not checked — no full text of the sourcecites [53] Wu, 2020, Preliminary sensitivity study on an life cycle assessment (lca) tool via assessing a hybrid timber building, J. Bioresour. Bioprod. source
- Could not verifycites [54] Nikolić Topalović, M., Stanković, M., Ćirović, G., and Pamučar, D. (2018). Comparison of the applied measures on the simulated scenarios for the sustainable building construction through carbon footprint emissions—case study of building construction in serbia. Sustainability, 10. sourceExperimental — accuracy not yet measured
The Conclusions (p. 15) compare insulation and façade-carpentry scenarios for a Serbian residential building, not fully wood-based buildings with steel-reinforced concrete buildings. Searches for that comparison and the 10–55% range found no passage addressing either the claimed performance difference or most environmental impact categories. (LLM, conf=0.77)
- Could not verifycites [55] Gámez-García, D.C., Gómez-Soberón, J.M., Corral-Higuera, R., Saldaña-Márquez, H., Gómez-Soberón, M.C., and Arredondo-Rea, S.P. (2018). A cradle to handover life cycle assessment of external walls: Choice of materials and prognosis of elements. Sustainability, 10. sourceExperimental — accuracy not yet measured
The Case Studies section (p. 6) describes external walls made from clay or mortar pieces, plasterboard, and insulation. The comparison in section 5.2 (p. 11) concerns lighter clay and mortar walls, not fully wood-based buildings versus steel-reinforced concrete buildings. Searches for wood-based systems and the claimed 10–55% range found no passage addressing that comparison. (LLM, conf=0.76)
- Could not verifycites [56] Caruso, M., Pinho, R., Bianchi, F., Cavalieri, F., and Lemmo, M.T. (2020). A life cycle framework for the identification of optimal building renovation strategies considering economic and environmental impacts. Sustainability, 12. sourceExperimental — accuracy not yet measured
The General Workflow (p. 8) describes reinforced-concrete shear walls and retrofit materials, while the Conclusions (p. 16) discuss renovation strategies and carbon emissions. Searches for wood-based systems, steel-reinforced concrete comparisons, and the 10–55% range found no passage addressing the claimed comparison. (LLM, conf=0.75)
- Not checked — no full text of the sourcecites [57] Scope, 2020, In Aiming for Life Cycle Sustainability Assessment of Cement-Based Composites: A Trend Study for Wall Systems of Carbon Concrete; Dresden nexus conference 2020—session 4—circular economy for building with secondary construction materials to minimise resource use and land use, Civ. Eng. Des. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
Every source the paper cites for this claim was checked and supports it.
In the paper
“The results obtained by the RESPONSA are aligned with the outcomes of previous authors in the bio-based field [58,59], in terms of the relevance of the indices health and safety, decent work, labor and human rights, and social acceptability for social life cycle assessment in the bioeconomy field.”
What the sources say
- Supportedcites [58] Falcone, P.M., and Imbert, E. (2018). Social life cycle approach as a tool for promoting the market uptake of bio-based products from a consumer perspective. Sustainability, 10. source
Section 4.2 identifies health and safety, social acceptability, employment, and human rights and working conditions as impact categories relevant to social life cycle assessment of bio-based products. Its discussion of working conditions and rights covers the claim’s references to decent work and labor rights. (LLM, conf=0.92)
- Supportedcites [59] Falcone, 2019, Transitioning towards the bio-economy: Assessing the social dimension through a stakeholder lens, Corp. Soc. Responsib. Environ. Manag. source
Section 4.1 states that stakeholders identified health and safety, social acceptability, labor rights and decent work, and human rights as the most relevant categories for social life cycle assessment of bio-based products. These match the indices attributed to the source. (LLM, conf=0.94)
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The data used for Organization 1 is actually a complete primary dataset received from an actual organization in the Federal State of Thuringia [40].”
What the sources say
- Partly supportedcites [40] Jarosch, L., Zeug, W., Bezama, A., Finkbeiner, M., and Thran, D. (2020). A regional socio-economic life cycle assessment of a bioeconomy value chain. Sustainability, 12. sourceExperimental — accuracy not yet measured
The Inventory Analysis section says that the study used questionnaire data for Organization 1 because primary data for Organizations 2 and 3 were unavailable. It places Organization 1 in the forestry sector in Central Germany, but does not identify it as being in Thuringia; the indicator tables also contain missing data, so they do not establish that its dataset was complete. No page number is available in our copy. (LLM, conf=0.86)
plainSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
26 more claims
Create a free account to see all 69 claims and to verify the 4 references still open.
- Probably not a substantial claim. 25
- It may state two separate claims as one. 17
- Borderline: one of the tests for a substantial claim is unclear. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 2.3.4. Data Collection and Life Cycle Inventories
“Production of beech wood fibers for wood-based lightweight concrete system demonstrator type 1”
§ 2.3.1. Goal and Scope Definition 2.3.2. System Definition
“One demonstrator type relies on the use of wood flakes produced from wood chips further conditioned in a disc flaker process (demonstrator 1), and the other one relies on wood fibers also produced from wood chips, which are processed into fine fractions based on a refiner process (demonstrator 2).”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 2.3.1. Goal and Scope Definition 2.3.2. System Definition
“As a functional unit, 30.6 m 2 was chosen and is related to a thickness of 250 mm and a specific density between 1400 kg/m 3 .”
§ 2.3.3. Specification of Demonstrator Compositions and Definition of a Functional Unit
“| Length | 9300 | mm | Leading-edge cluster bioeconomy/Fraunhofer WKI | | Width | 3000 | mm | Leading-edge cluster bioeconomy/Fraunhofer WKI |”
Citations
Cites
Carbon emission of global construction sector
Huang, L., Krigsvoll, G., Johansen, F., Liu, Y., & Zhang, X. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.06.001 · Cited by 890 · cited 1×
“The CO2 emissions of the global construction sector account for 23% of the CO2 emissions of all economic activities worldwide [16].”
BackgroundHildebrandt, J., Hagemann, N., & Thrän, D. (2017) · Sustainable Cities and Society · doi:10.1016/j.scs.2017.06.013 · Cited by 253 · cited 1×
“, the forest-based bioeconomy and the supporting policy incentives and initiatives [2,3].”
BackgroundSelf-citationSiebert, A., Bezama, A., O’Keeffe, S., & Thrän, D. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.146 · Cited by 135 · cited 4×
“, relative social performances that can be improved) within regional production systems [11,39,40].”
BackgroundMethodInfluentialSelf-citationLee, M., Lin, Y.-L., Chiueh, P.-T., & Den, W. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119714 · Cited by 135
Biodiversity assessment of value chains: State of the art and emerging challenges
Crenna, E., Marques, A., La Notte, A., & Sala, S. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.9b05153 · Cited by 130
Ingrao, C., Bacenetti, J., Bezama, A., Blok, V., Goglio, P., Koukios, E. G., Lindner, M., Nemecek, T., Siracusa, V., Zabaniotou, A. A., et al. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.068 · Cited by 126
Self-citationChen, Z., Gu, H., Bergman, R., & Liang, S. (2020) · Sustainability · doi:10.3390/su12114708 · Cited by 123
A review of material properties and performance of straw bale as building material
Koh, C. H., & Kraniotis, D. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120385 · Cited by 110
Béfort, N. (2020) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2020.119923 · Cited by 98
Karlsson, I., Rootzén, J., Toktarova, A., Odenberger, M., Johnsson, F., & Göransson, L. (2020) · Energies · doi:10.3390/en13164136 · Cited by 97
Research works printed but not linked: 2
- Siebert, A. (2019). Socio-Economic Assessment of Wood-Based Products from German Bioeconomy Regions: A Social Life Cycle Assessment Approach. [Dissertation’ s Thesis, University of Leipzig].
- Jarosch, L. (2019). A Social Life Cycle Assessment in Context of the Bioeconomy: The Example of Social Aspects of the Timber Processing Industry in Central Germany. [B.Sc. Thesis, Technische Universität Berlin].
Cited by
Progress of social assessment in the framework of bioeconomy under a life cycle perspective
Rebolledo-Leiva, R., Moreira, M. T., & González‐García, S. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113162 · Cited by 69
Knowledge Mapping of bioeconomy: A bibliometric analysis
Wei, X., Liu, Q., Pu, A., Wang, S., Chen, F., Zhang, L., Zhang, Y., Dong, Z., & Wan, X. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.133824 · Cited by 59
Forest bioeconomy at regional scale: A systematic literature review and future policy perspectives
Letizia, G. D., Lucia, C. D., Pazienza, P., & Cappelletti, G. M. (2023) · Forest Policy and Economics · doi:10.1016/j.forpol.2023.103052 · Cited by 45
Ayassamy, P., & Pellerin, R. (2023) · Sustainability · doi:10.3390/su151914569 · Cited by 38
“, 2021 [32] Compare two different demonstrator systems for lightweight wood-based concrete elements Wood-Based Concrete Elements Germany”
BackgroundBarbero, I., Rezgui, Y., Beach, T., et al. (2024) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-024-02341-7 · Cited by 32
“Bezama et al. (2021), within the context of examining socioeconomic evaluations of value chains, used a combination of the ‘Regional Specific contextualised Social Life Cycle Assessment (RESPONSA)’ with LCA.”
Method
Metadata
- Authors
- Bezama, A., Hildebrandt, J., & Thrän, D.
- Affiliations
- Helmholtz Centre for Environmental Research (DE)
- Corresponding author
- Bezama, Alberto
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2021-04-10
- Volume
- 13
- Issue
- 8
- Pages
- 4221
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W3152995163
- Cited by
- 22
- References
- 63
- Citations by year
- 2026: 2 · 2025: 4 · 2024: 6 · 2023: 7 · 2022: 3
- FWCI
- 1.30
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Bundesministerium für Bildung und Forschung (031A078A)
- Helmholtz Association (Joint Initiative “Energy System 2050—A Contribution of the Research Field Energy”)
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Life Sciences › Agricultural and Biological Sciences › General Agricultural and Biological Sciences › Bioeconomy and Sustainability Development
- Physical Sciences › Environmental Science › Management, Monitoring, Policy and Law › Environmental and Social Impact Assessments
- Keywords
- social life cycle assessment, lightweight concrete panels, socio-economic impacts, job quality, life cycle impact assessment
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-30, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-30 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Integrating Regionalized Socioeconomic Considerations onto Life Cycle Assessment for Evaluating Bioeconomy Value Chains: A Case Study on Hybrid Wood–Concrete Ceiling Elements. https://app.cochat.ai/papers/10.3390/su13084221
- The paper
- Bezama, A., Hildebrandt, J., & Thrän, D. (2021). Integrating Regionalized Socioeconomic Considerations onto Life Cycle Assessment for Evaluating Bioeconomy Value Chains: A Case Study on Hybrid Wood–Concrete Ceiling Elements. Sustainability. https://doi.org/10.3390/su13084221
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.