The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
A three-dimensional cellular automation-finite element model for the prediction of solidification grain structures
Open accessAbstract
A three-dimensional (3-D) model for the prediction of dendritic grain structures formed during solidification is presented. This model is built on the basis of a 3-D cellular automaton (CA) algorithm. The simulation domain is subdivided into a regular lattice of cubic cells. Using physically based rules for the simulation of nucleation and growth phenomena, a state index associated with each cell is switched from zero (liquid state) to a positive value (mushy and solid state) as solidification proceeds. Because these physical phenomena are related to the temperature field, the cell grid is superimposed to a coarser finite element (FE) mesh used for the solution of the heat flow equation. Two coupling modes between the microscopic CA and macroscopic FE calculations have been designed. In a so-called “weak” coupling mode, the temperature of each cell is simply interpolated from the temperature of the FE nodes using a unique solidification path at the macroscopic scale. In a “full” coupling mode, the enthalpy field is also interpolated from the FE nodes to the CA cells and a fraction of solid increment is computed for each mushy cell using a truncated Scheil microsegregation model. These fractions of solid increments are then fed back to the FE nodes in order to update the new temperature field, thus accounting for a more realistic release of the latent heat (i.e., the solidification path is no longer unique). Special dynamic allocation techniques have been designed in order to minimize the computation costs and memory size associated with a very large number of cells (typically 107 to 108). The potentiality of the CAFE model is demonstrated through the predictions of typical grain structures formed during the investment casting and continuous casting processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multi-level adaptive solutions to boundary-value problems
Brandt, A. (1977) · Mathematics of Computation · doi:10.1090/s0025-5718-1977-0431719-x · Cited by 3,357
Fundamentals of Solidification
Kurz, W., & Fisher, D. J. (2012) · ASM International eBooks · doi:10.31399/asm.tb.pdub.t53420429 · Cited by 3,287
Texture Analysis in Materials Science
(1982) · Elsevier eBooks · doi:10.1016/c2013-0-11769-2 · Cited by 1,913
Tüceryan, M., & Jain, A. K. (1993) · Cited by 1,837
Cellular Automata Machines: A New Environment for Modeling
Toffoli, T., & Margolus, N. (1987) · The MIT Press eBooks · doi:10.7551/mitpress/1763.001.0001 · Cited by 1,425
Theory of microstructural development during rapid solidification
Kurz, W., Giovanola, B., & Trivedi, R. (1986) · Acta Metallurgica · doi:10.1016/0001-6160(86)90056-8 · Cited by 1,358
Theory of Microstructural Development During Rapid Solidification
Trivedi, R., & Kurz, W. (1986) · Springer eBooks · doi:10.1007/978-94-009-4456-5_24 · Cited by 693
Kinetics of Heterogeneous Nucleation
Turnbull, D. (1950) · The Journal of Chemical Physics · doi:10.1063/1.1747588 · Cited by 670
Overview 12: Fundamentals of dendritic solidification—I. Steady-state tip growth
Huang, S., & Glicksman, M. E. (1981) · Acta Metallurgica · doi:10.1016/0001-6160(81)90115-2 · Cited by 630
Cited by
Li, Y., Feng, Z., Hao, L., Huang, L., Xin, C., Wang, Y., Bilotti, E., Essa, K., Zhang, H., Li, Z., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900981 · Cited by 614
Generation of 3D representative volume elements for heterogeneous materials: A review
Bargmann, S., Klusemann, B., Markmann, J., Schnabel, J. E., Schneider, K., Soyarslan, C., & Wilmers, J. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.02.003 · Cited by 546
Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2015) · Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · doi:10.1177/0954410014568797 · Cited by 489
Multi-scale defects in powder-based additively manufactured metals and alloys
Fu, J., Li, H., Song, X., & Fu, M. W. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.02.015 · Cited by 391
Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo
Rodgers, T. M., Madison, J. D., & Tikare, V. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2017.03.053 · Cited by 369
Metadata
- Authors
- Gandin, C. A., Desbiolles, J. L., Rappaz, M., & Thevoz, P.
- Venue
- Metallurgical and Materials Transactions A
- Published
- 1999-12
- Volume
- 30
- Issue
- 12
- Pages
- 3153-3165
- ISSN
- 1073-5623 (ISSN-L)
- 1543-1940
- OpenAlex
- W1991633744
- Cited by
- 360
- References
- 9
- FWCI
- 3.43
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A three-dimensional cellular automation-finite element model for the prediction of solidification grain structures. https://app.cochat.ai/papers/10.1007/s11661-999-0226-2
- The paper
- Gandin, C. A., Desbiolles, J. L., Rappaz, M., & Thevoz, P. (1999). A three-dimensional cellular automation-finite element model for the prediction of solidification grain structures. Metallurgical and Materials Transactions A. https://doi.org/10.1007/s11661-999-0226-2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.