CoChat
Sign Up
Cited by 53Microbial Fuel Cells and BioremediationThermochemical Biomass Conversion ProcessesFuel Cells and Related Materials

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Cedar Wood-Based Biochar: Properties, Characterization, and Applications as Anodes in Microbial Fuel Cell

Bataillou, Gregory, Lee, Carine, Monnier, Virginie, Gerges, Tony, Sabac, Andrei, Vollaire, Christian, Haddour, Naoufel·2022·Applied Biochemistry and Biotechnology
DOI 10.1007/s12010-022-03997-3
Open this paper in CoChat — free account

Abstract

In this study, the relationship between pyrolysis temperature of woody biomass and physicochemical properties of derived biochar was investigated for microbial fuel cell (MFC) application. Physical and chemical properties of biochar were characterized for different pyrolysis temperatures. Results showed that biochar obtained at 400 °C was not conductor, while biochars prepared at 600 °C, 700 °C, and 900 °C exhibited decreased electrical resistivity of (7 ± 6) × 10 3 Ω.m, (1.8 ± 0.2) Ω.m, and (16 ± 3) × 10 -3 Ω.m, respectively. Rising pyrolysis temperature from 400 to 700 °C exhibited honeycomb-like macroporous structures of biochar with an increase in the specific surface area from 310 to 484 m 2 .g -1 . However, the production of biochar at 900 °C reduced its specific surface area to 136 m 2 .g -1 and caused the loss of the ordered honeycomb structure. MFCs using anodes based on biochar prepared at 900 °C produced maximum power densities ((9.9 ± 0.6) mW.m -2 ) higher than that obtained with biochar pyrolyzed at 700 °C ((5.8 ± 0.1) mW.m -2 ) and with conventional carbon felt anodes ((1.9 ± 0.2) mW.m -2 ). SEM images of biochar-based anodes indicated the clogging of macropores in honeycomb structure of biochar prepared at 700 °C by growth of electroactive biofilms, which might impede the supply of substrate and the removal of metabolites from the inside of the electrode. These findings highlight that electrical conductivity of biochar is the major parameter for ensuring effici…

Overview

Integrity signals

Registry

Crossref · 10.1007/s12010-022-03997-3

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 6 references

Research works printed but not linked: 66

  1. Godain, A., Haddour, N., & Fongarland, P. (2022). Bacterial competition for the anode colonization under different external resistances in microbial fuel cells. Catalysts, 12, 1–13. · DOI
  2. Paitier, A., Godain, A., Lyon, D., Haddour, N., Vogel, T. M., & Monier, J. M. (2017). Microbial fuel cell anodic microbial population dynamics during MFC start-up. Biosensors and Bioelectronics., 92, 357–363. · DOI
  3. Lyon, D. Y., Buret, F., Vogel, T. M., & Monier, J. M. (2010). Is resistance futile? Changing external resistance does not improve microbial fuel cell performance. Bioelectrochemistry, 78, 2–7. · DOI
  4. Trapero, J. R., Horcajada, L., Linares, J. J., & Lobato, J. (2017). Is microbial fuel cell technology ready? An economic answer towards industrial commercialization. Applied Energy., 185, 698–707. · DOI
  5. Li, W. W., Yu, H. Q., & He, Z. (2014). Towards sustainable wastewater treatment by using microbial fuel cells-centered technologies. Energy and Environmental Science., 7, 911–924. · DOI
  6. Saadi, M., Pézard, J., Haddour, N., Erouel, M., Vogel, T. M., & Khirouni, K. (2020). Stainless steel coated with carbon nanofiber/PDMS composite as anodes in microbial fuel cells. Materials Research Express., 7(25504), 1–8.
  7. Bensalah, F., Julien, P., Haddour, N., Erouel, M., Buret, F., & Khirouni, K. (2021). Carbon nano-fiber / PDMS composite used as corrosion-resistant coating for copper anodes in microbial fuel cells. Nanomaterials, 11(3144), 1–13.
  8. Dumitru, A. & Scott, K. (2016). In microbial electrochemical and fuel cells: fundamentals and applications, vol. 1: Anode materials for microbial fuel (K. Scott and E. Hao Yu, ed.), Woodhead Publishing Ltd, pp. 117–152. · DOI
  9. Paitier, A., Haddour, N., Gondran, C., & Vogel, T. M. (2022). Effect of contact area and shape of anode current collectors on bacterial community structure in microbial fuel cells. Molecules, 27(2245), 1–14.
  10. Wei, J., Liang, P., & Huang, X. (2011). Recent progress in electrodes for microbial fuel cells. Bioresource Technology., 102, 9335–9344. · DOI
  11. Corbella, C., Puigagut, J., & Garfí, M. (2017). Life cycle assessment of constructed wetland systems for wastewater treatment coupled with microbial fuel cells. Science of the Total Environment., 584–585, 355–362. · DOI
  12. Chakraborty, I., Sathe, S. M., Dubey, B. K., & Ghangrekar, M. M. (2020). Waste-derived biochar: Applications and future perspective in microbial fuel cells. Bioresource Technology., 312(123587), 1–12.
  13. Minke, C., Kunz, U., & Turek, T. (2017). Carbon felt and carbon fiber - A techno-economic assessment of felt electrodes for redox flow battery applications. Journal of Power Sources., 342, 116–124. · DOI
  14. Patwardhan, S. B., Pandit, S., Kumar Gupta, P., Kumar Jha, N., Rawat, J., Joshi, H. C., & Kumar Kesari, K. (2022). Recent advances in the application of biochar in microbial electrochemical cells. Fuel, 311(122501), 1–16.
  15. Mian, M. M., Liu, G., & Fu, B. (2019). Conversion of sewage sludge into environmental catalyst and microbial fuel cell electrode material: A review. Science of the Total Environment., 666, 525–539. · DOI
  16. Gupta, M., Savla, N., Pandit, C., Pandit, S., Gupta, P. K., Pant, M., & Thakur, V. K. (2022). Use of biomass-derived biochar in wastewater treatment and power production: A promising solution for a sustainable environment. Science of the Total Environment., 825(153892), 1–25.
  17. Lehmann, J. (2007). Bio-energy in the black. Frontiers in Ecology and the Environment., 5, 381–387. · DOI · Paper page
  18. Awasthi, M. K. (2022). Engineered biochar: A multifunctional material for energy and environment. Environmental Pollution., 298(118831), 1–16.
  19. Kant Bhatia, S., Palai, A. K., Kumar, A., Kant Bhatia, R., Kumar Patel, A., Kumar Thakur, V., & Yang, Y. H. (2021). Trends in renewable energy production employing biomass-based biochar. Bioresource Technology., 340(125644), 1–12.
  20. Rathour, R., Kumar, H., Prasad, K., Anerao, P., Kumar, M., Kapley, A., & Singh, L. (2022). Multifunctional applications of bamboo crop beyond environmental management: An Indian prospective. Bioengineered, 13, 8893–8914. · DOI
  21. Zhu, Q. L., Wu, B., Pisutpaisal, N., Wang, Y. W., Ma, K., & dong, Dai, L. C., He and M. X. (2021). Bioenergy from dairy manure: Technologies, challenges and opportunities. Science of the Total Environment., 790(148199), 1–17.
  22. Wang, Y., Liu, L., Luo, Y., Awasthi, M. K., Yang, J., Duan, Y., & Zhao, Z. (2020). Mulching practices alter the bacterial-fungal community and network in favor of soil quality in a semiarid orchard system. Science of the Total Environment., 725(138527), 1–13.
  23. Wang, Y., Huang, Q., Liu, C., Ding, Y., Liu, L., Tian, Y., & Zhao, Z. (2020). Mulching practices alter soil microbial functional diversity and benefit to soil quality in orchards on the Loess Plateau. Journal of Environmental Management., 271(110985), 1–10.
  24. Kumar Awasthi, M., Ravindran, B., Sarsaiya, S., Chen, H., Wainaina, S., Singh, E., & Zhang, Z. (2020). Metagenomics for taxonomy profiling: Tools and approaches. Bioengineered, 11, 356–374. · DOI
  25. Duan, Y., Yang, J., Song, Y., Chen, F., Li, X., Awasthi, M. K., & Zhang, L. (2021). Clean technology for biochar and organic waste recycling, and utilization in apple orchard. Chemosphere, 274(129914), 1–10.
  26. Liu, H., Kumar, V., Yadav, V., Guo, S., Sarsaiya, S., Binod, P., & Kumar Awasthi, M. (2021). Bioengineered biochar as smart candidate for resource recovery toward circular bio-economy: A review. Bioengineered, 12, 10269–10301. · DOI
  27. Zhou, Y., Qin, S., Verma, S., Sar, T., Sarsaiya, S., Ravindran, B., & Awasthi, M. K. (2021). Production and beneficial impact of biochar for environmental application: A comprehensive review. Bioresource Technology., 337(125451), 1–14.
  28. Wang, J., Song, X., Li, Q., Bai, H., Zhu, C., Weng, B., & Bai, J. (2019). Bioenergy generation and degradation pathway of phenanthrene and anthracene in a constructed wetland-microbial fuel cell with an anode amended with nZVI. Water Research., 150, 340–348. · DOI
  29. Cheng, D., Ngo, H. H., Guo, W., Chang, S. W., Nguyen, D. D., Li, J., & Tran, V. S. (2020). Applying a new pomelo peel derived biochar in microbial fell cell for enhancing sulfonamide antibiotics removal in swine wastewater. Bioresource Technology., 318(123886), 1–5.
  30. Li, X., Li, Y., Zhang, X., Zhao, X., Sun, Y., Weng, L., & Li, Y. (2019). Long-term effect of biochar amendment on the biodegradation of petroleum hydrocarbons in soil microbial fuel cells. Science of the Total Environment., 651, 796–806. · DOI
  31. Lawan, J., Wichai, S., Chuaypen, C., Nuiyen, A., & Phenrat, T. (2022). Constructed sediment microbial fuel cell for treatment of fat, oil, grease (FOG) trap effluent: Role of anode and cathode chamber amendment, electrode selection, and scalability. Chemosphere, 286(131619), 1–12.
  32. Dong, J., Wu, Y., Wang, C., Lu, H., & Li, Y. (2020). Three-dimensional electrodes enhance electricity generation and nitrogen removal of microbial fuel cells. Bioprocess and Biosystems Engineering., 43, 2165–2174. · DOI
  33. Zha, Z., Zhang, Z., Xiang, P., Zhu, H., Zhou, B., Sun, Z., & Zhou, S. (2020). One-step preparation of eggplant-derived hierarchical porous graphitic biochar as efficient oxygen reduction catalyst in microbial fuel cells. RSC Advances., 11, 1077–1085. · DOI
  34. Jiang, J., Zhang, S., Li, S., Zeng, W., Li, F., & Wang, W. (2022). Magnetized manganese-doped watermelon rind biochar as a novel low-cost catalyst for improving oxygen reduction reaction in microbial fuel cells. Science of the Total Environment., 802(149989), 1–13.
  35. Chen, S., He, G., Hu, X., Xie, M., Wang, S., Zeng, D., & Schröder, U. (2012). A three-dimensionally ordered macroporous carbon derived from a natural resource as anode for microbial bioelectrochemical systems. Chemsuschem, 5, 1059–1063. · DOI
  36. Pontiroli, D., Scaravonati, S., Magnani, G., Fornasini, L., Bersani, D., Bertoni, G., & Li, L. (2019). Super-activated biochar from poultry litter for high-performance supercapacitors. Carbon, 147, 161–169.
  37. Song, M., Zhou, Y., Ren, X., Wan, J., Du, Y., Wu, G., & Ma, F. (2019). Biowaste-based porous carbon for supercapacitor: The influence of preparation processes on structure and performance. Journal of Colloid and Interface Science., 535, 276–286. · DOI
  38. Nisticò, R., Guerretta, F., Benzi, P., & Magnacca, G. (2020). Chitosan-derived biochars obtained at low pyrolysis temperatures for potential application in electrochemical energy storage devices. International Journal of Biological Macromolecules., 164, 1825–1831. · DOI
  39. Huggins, T. M., Latorre, A., Biffinger, J. C., & Ren, Z. J. (2016). Biochar based microbial fuel cell for enhanced wastewater treatment and nutrient recovery. Sustainability., 8, 1–10. · DOI
  40. Yang, W., & Chen, S. (2020). Biomass-derived carbon for electrode fabrication in microbial fuel cells: A review. Industrial and Engineering Chemistry Research., 59, 6391–6404. · DOI
  41. Yuan, Y., Liu, T., Fu, P., Tang, J., & Zhou, S. (2015). Conversion of sewage sludge into high-performance bifunctional electrode materials for microbial energy harvesting. Journal of Materials Chemistry A., 3, 8475–8482. · DOI
  42. Chaijak, P., Sato, C., Lertworapreecha, M., Sukkasem, C., Boonsawang, P., & Paucar, N. (2020). Potential of biochar-anode in a ceramic-separator microbial fuel cell (Cmfc) with a laccase-based air cathode. Polish Journal of Environmental Studies., 29, 499–503. · DOI
  43. Wang, C. T., Sangeetha, T., Ding, D. Q., Chong, W. T., & Yan, W. M. (2018). Implementation of surface modified carbon cloth electrodes with biochar particles in microbial fuel cells. International Journal of Green Energy., 15, 789–794. · DOI
  44. Leng, L., Xiong, Q., Yang, L., Li, H., Zhou, Y., Zhang, W., & Huang, H. (2021). An overview on engineering the surface area and porosity of biochar. Science of the Total Environment., 763(144204), 1–18.
  45. Miccoli, I., Edler, F., Pfnür, H., & Tegenkamp, C. (2015). The 100th anniversary of the four-point probe technique: The role of probe geometries in isotropic and anisotropic systems. Journal of Physics Condensed Matter., 27(223201), 1–29.
  46. Gabhi, R., Basile, L., Kirk, D. W., Giorcelli, M., Tagliaferro, A., & Jia, C. Q. (2020). Electrical conductivity of wood biochar monoliths and its dependence on pyrolysis temperature. Biochar., 2, 369–378. · DOI
  47. Spiess, S., Kucera, J., Seelajaroen, H., Sasiain, A., Thallner, S., Kremser, K., Novak, D., Guebitz, G. M., & Haberbauer, M. (2021). Impact of carbon felt electrode pretreatment on anodic biofilm composition in microbial electrolysis cells. Biosensors, 11, 170. · DOI
  48. Santoro, C., Guilizzoni, M., Baena, J. P. C., & Pasaogullari, U. (2014). The effects of carbon electrode surface properties on bacteria attachment and start up time of microbial fuel cells. Carbon, 67, 128–139. · DOI
  49. Champigneux, P., Bergel, A., Champigneux, P., & Bergel, A. (2018). Impact of electrode micro- and nano-scale topography on the formation and performance of microbial electrodes. Biosensors and Bioelectronics., 118, 231–246. · DOI
  50. Deng, C., Lin, R., Kang, X., Wu, B., Wall, D. M., & Murphy, J. D. (2021). What physicochemical properties of biochar facilitate interspecies electron transfer in anaerobic digestion: A case study of digestion of whiskey by-products. Fuel, 306(121736), 1–15.
  51. Zhang, L., Li, C., Ding, L., Xu, K., & Ren, H. (2011). Influences of initial pH on performance and anodic microbes of fed-batch microbial fuel cells. Journal of Chemical Technology and Biotechnology., 86, 1226–1232. · DOI
  52. Cárdenas- Aguiar, E., Gascó, G., Paz-Ferreiro, J., & Méndez, A. (2017). The effect of biochar and compost from urban organic waste on plant biomass and properties of an artificially copper polluted soil. International Biodeterioration and Biodegradation., 124, 223–232. · DOI
  53. Ding, W., Dong, X., Ime, I. M., Gao, B., & Ma, L. Q. (2014). Pyrolytic temperatures impact lead sorption mechanisms by bagasse biochars. Chemosphere, 105, 68–74. · DOI · Paper page
  54. Yuan, Y., Hays, M. P., Hardwidge, P. R., & Kim, J. (2017). Surface characteristics influencing bacterial adhesion to polymeric substrates. RSC Advances., 7, 14254–14261. · DOI
  55. Notley, S. M., & Norgren, M. (2010). Surface energy and wettability of spin-coated thin films of lignin isolated from wood. Langmuir, 26, 5484–5490. · DOI
  56. Guo, K., Freguia, S., Dennis, P. G., Chen, X., Donose, B. C., Keller, J., & Rabaey, K. (2013). Effects of surface charge and hydrophobicity on anodic biofilm formation, community composition, and current generation in bioelectrochemical systems. Environmental Science and Technology., 47, 7563–7570. · DOI
  57. Mao, J., Zhang, K., & Chen, B. (2019). Linking hydrophobicity of biochar to the water repellency and water holding capacity of biochar-amended soil. Environmental Pollution., 253, 779–789. · DOI
  58. Lyczakowski, J. J., Bourdon, M., Terrett, O. M., Helariutta, Y., Wightman, R., & Dupree, P. (2019). Structural imaging of native cryo-preserved secondary cell walls reveals the presence of macrofibrils and their formation requires normal cellulose, lignin and xylan biosynthesis. Frontiers in Plant Science., 10, 1–14. · DOI
  59. Rattanaweeranon, S., Limsuwan, P., Thongpool, V., Piriyawong, V., & Asanithi, P. (2012). Influence of bulk graphite density on electrical conductivity. Procedia Engineering., 32, 1100–1106. · DOI
  60. Ortega, J. V., Renehan, A. M., Liberatore, M. W., & Herring, A. M. (2011). Physical and chemical characteristics of aging pyrolysis oils produced from hardwood and softwood feedstocks. Journal of Analytical and Applied Pyrolysis., 91, 190–198. · DOI
  61. Oh, J. K., Yegin, Y., Yang, F., Zhang, M., Li, J., Huang, S., & Akbulut, M. (2018). The influence of surface chemistry on the kinetics and thermodynamics of bacterial adhesion. Scientific Reports., 8, 1–13.
  62. Yazdi, A. A., D’Angelo, L., Omer, N., Windiasti, G., Lu, X., & Xu, J. (2016). Carbon nanotube modification of microbial fuel cell electrodes. Biosensors and Bioelectronics., 85, 536–552. · DOI
  63. Peters, D. W. (2011). In handbook of cleaning in semiconductor manufacturing: fundamental and applications, vol. 11: Corrosion and passivation of copper (K. A. Reinhardt, Ri. F. Reidy, ed.), Wiley, pp. 395–428. · DOI
  64. Guan, Y. F., Zhang, F., Huang, B. C., & Yu, H. Q. (2019). Enhancing electricity generation of microbial fuel cell for wastewater treatment using nitrogen-doped carbon dots-supported carbon paper anode. Journal of Cleaner Production., 229, 412–419. · DOI
  65. Prévoteau, A., & Rabaey, K. (2017). Electroactive biofilms for sensing: Reflections and perspectives. ACS Sensors., 2, 1072–1085. · DOI
  66. Feng, C., Ma, L., Li, F., Mai, H., Lang, X., & Fan, S. (2010). A polypyrrole/anthraquinone-2,6-disulphonic disodium salt (PPy/AQDS)-modified anode to improve performance of microbial fuel cells. Biosensors and Bioelectronics., 25, 1516–1520. · DOI

Cited by

Sorted by citations

Metadata

Authors
Bataillou, G., Lee, C., Monnier, V., Gerges, T., Sabac, A., Vollaire, C., & Haddour, N.
Affiliations
Lyon 1 Université (FR)
Corresponding author
Haddour, Naoufel
ORCID
Venue
Applied Biochemistry and Biotechnology
Publisher
Springer Science and Business Media LLC
Published
2022-06-06
Volume
194
Issue
9
Pages
4169-4186
ISSN
  • 0273-2289 (ISSN-L)
  • 1559-0291
DOI
10.1007/s12010-022-03997-3
OpenAlex
W4281651620
Cited by
53
References
6
Citations by year
2026: 14 · 2025: 8 · 2024: 20 · 2023: 7 · 2022: 4
FWCI
2.96
Type
journal article
Language
en
Open access
closed
Licence
Locations
  • Applied Biochemistry and Biotechnology (publishedVersion)
  • PubMed (publishedVersion)
  • HAL (submittedVersion)
Funders
CNRS-MITI interdisciplinary programs (Changement Climatique- AAP 2020: 308211)
Topics
  • Physical Sciences › Environmental Science › Environmental Engineering › Microbial Fuel Cells and Bioremediation
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
Keywords
biochar, cedar wood, pyrolysis temperature, electrical conductivity, specific surface area, power density, electroactive biofilms, woody biomass
MeSH terms
Bioelectric Energy Sources, Charcoal, Electrodes, Wood

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review