Tuning oxygen vacancies in two-dimensional iron-cobalt oxide nanosheets through hydrogenation for enhanced oxygen evolution activity
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
The oxygen evolution reaction (OER) represents the rate-determining step of electrocatalytic water splitting into hydrogen and oxygen. Creating oxygen vacancies and adjusting their density has proven to be an effective strategy to design high-performance OER catalysts. Herein, a hydrogenation method is applied to treat a two-dimensional (2D) iron-cobalt oxide (Fe 1 Co 1 O x -origin), with the purpose of tuning its oxygen vacancy density. Notably, compared with Fe 1 Co 1 O x -origin, the iron-cobalt oxide hydrogenated at 200 °C and 2.0 MPa optimized conditions exhibits a markedly improved OER activity in 1.0 M KOH (with an overpotential η of 225 mV at a current density of 10 mA·cm –2 ) and a rapid reaction kinetics (with a Tafel slope of 36.0 mV·dec –1 ). Moreover, the OER mass activity of the hydrogenated oxide is 1.9 times that of Fe 1 Co 1 O x -origin at an overpotential of 350 mV. The experimental results, combined with density functional theory (DFT) calculations, reveal that the optimal control of oxygen vacancies in 2D Fe 1 Co 1 O x via hydrogenation can improve the electronic conductivity and promote OH – adsorption onto nearby low-coordinated Co 3+ sites, resulting in a significantly enhanced OER activity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Single-atom catalysis of CO oxidation using Pt1/FeOx
Qiao, B., Wang, A., Yang, X., Allard, L. F., Jiang, Z., Cui, Y., Liu, J., Li, J., & Zhang, T. (2011) · Nature Chemistry · doi:10.1038/nchem.1095 · Cited by 7,526
Kibsgaard, J., Chen, Z., Reinecke, B. N., & Jaramillo, T. F. (2012) · Nature Materials · doi:10.1038/nmat3439 · Cited by 3,234 · cited 1×
“Chemical modification of these inorganic 2D nanomaterials by engineering their electronic and band structures can greatly enhance their performance in various applications [3].”
BackgroundEnhanced catalytic activity in strained chemically exfoliated WS2 nanosheets for hydrogen evolution
Voiry, D., Yamaguchi, H., Li, J., Silva, R., Alves, D. C. B., Fujita, T., Chen, M., Asefa, T., Shenoy, V. B., Eda, G., et al. (2013) · Nature Materials · doi:10.1038/nmat3700 · Cited by 2,641
Homogeneously dispersed multimetal oxygen-evolving catalysts
Zhang, B., Zheng, X., Voznyy, O., Comin, R., Bajdich, M., García-Melchor, M., Han, L., Xu, J., Liu, M., Zheng, L., et al. (2016) · Science · doi:10.1126/science.aaf1525 · Cited by 2,447
Xu, L., Jiang, Q., Xiao, Z., Li, X., Huo, J., Wang, S., & Dai, L. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201600687 · Cited by 2,073
Atomic cobalt on nitrogen-doped graphene for hydrogen generation
Fei, H., Dong, J., Arellano-Jiménez, M. J., Ye, G., Dong Kim, N., Samuel, E. L. G., Peng, Z., Zhu, Z., Qin, F., Bao, J., et al. (2015) · Nature Communications · doi:10.1038/ncomms9668 · Cited by 1,621 · cited 2×
“Cs is generally in the range of 20 to 60 μF·cm–2 [37, 38]; in this work, we used the average value of 40 μF·cm–2 to calculate the ECSA as Cdl/Cs.”
MethodInfluentialSelf-citationBao, J., Zhang, X., Fan, B., Zhang, J., Zhou, M., Yang, W., Hu, X., Wang, H., Pan, B., & Xie, Y. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201502226 · Cited by 1,428
Kibsgaard, J., & Jaramillo, T. F. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201408222 · Cited by 1,048 · cited 2×
“Cs is generally in the range of 20 to 60 μF·cm–2 [37, 38]; in this work, we used the average value of 40 μF·cm–2 to calculate the ECSA as Cdl/Cs.”
MethodInfluentialJia, X., Zhao, Y., Chen, G., Shang, L., Shi, R., Kang, X., Waterhouse, G. I. N., Wu, L., Tung, C., & Zhang, T. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502585 · Cited by 773
Cited by
The roles of oxygen vacancies in electrocatalytic oxygen evolution reaction
Zhu, K., Shi, F., Zhu, X., & Yang, W. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104761 · Cited by 1,018
Defect Chemistry in Heterogeneous Catalysis: Recognition, Understanding, and Utilization
Xie, C., Yan, D., Li, H., Du, S., Chen, W., Wang, Y., Zou, Y., Chen, R., & Wang, S. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c03034 · Cited by 623
Defect engineering in earth-abundant electrocatalysts for CO2 and N2 reduction
Wang, Q., Lei, Y., Wang, D., & Li, Y. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03781g · Cited by 574
Insight into the design of defect electrocatalysts: From electronic structure to adsorption energy
Xie, C., Yan, D., Chen, W., Zou, Y., Chen, R., Zang, S., Wang, Y., Yao, X., & Wang, S. (2019) · Materials Today · doi:10.1016/j.mattod.2019.05.021 · Cited by 490
Self-citationOxygen evolution reaction (OER) mechanism under alkaline and acidic conditions
Liang, Q., Brocks, G., & Bieberle-Hütter, A. (2021) · Journal of Physics: Energy · doi:10.1088/2515-7655/abdc85 · Cited by 460
Metadata
- Authors
- Zhuang, L., Jia, Y., He, T., Du, A., Yan, X., Ge, L., Zhu, Z., & Yao, X.
- Venue
- Nano Research
- Publisher
- Tsinghua University Press
- Published
- 2018-05-22
- Volume
- 11
- Issue
- 6
- Pages
- 3509-3518
- ISSN
- 1998-0000 (ISSN-L)
- 1998-0124
- OpenAlex
- W2791743118
- Cited by
- 221
- References
- 9
- FWCI
- 5.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.