The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Comparison of the experimental results with the Langmuir and Freundlich models for copper removal on limestone adsorbent
Open accessAbstract
The purpose of this study was to investigate the possibility of the limestone as an adsorbed media and low-cost adsorbent. Batch adsorption studies were conducted to examine the effects of the parameters such as initial metal ion concentration C0, particle size of limestone DL, adsorbent dosage and equilibrium concentration of heavy metal Ce on the removal of the heavy metal (Cu) from synthetic water solution by limestone. The removal efficiency is increased with the increase in the volume of limestone (influenced by the media specific area). It has been noted that the limestone with diameter of 3.75 is the most effective size for removal of copper from synthetic solution. The adsorption data were analyzed by the Langmuir and Freundlich isotherm model. The average values of the empirical constant and adsorption constant (saturation coefficient) for the Langmuir equation were a = 0.022 mg/g and b = 1.46 l/mg, respectively. The average values of the Freundlich adsorption constant and empirical coefficient were Kf = 0.010 mg/g and n = 1.58 l/mg, respectively. It was observed that the Freundlich isotherm model described the adsorption process with high coefficient of determination R2, better than the Langmuir isotherm model and for low initial concentration of heavy metal. Also, when the values of amount of heavy metal removal from solution are predicted by the Freundlich isotherm model, it showed best fits the batch study. It is clear from the results that heavy metal (Cu) removal with the limestone adsorbent appears to be technically feasible and with high efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
Adsorption of dyes on chitin. I. Equilibrium studies
McKay, G., Blair, H. S., & Gardner, J. R. (1982) · Journal of Applied Polymer Science · doi:10.1002/app.1982.070270827 · Cited by 926
Single, binary, and multicomponent sorption of iron and manganese on lignite
Mohan, D., & Chander, S. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.02.010 · Cited by 149
Cited by
Effective Removal of Anionic Textile Dyes Using Adsorbent Synthesized from Coffee Waste
Wong, S., Ghafar, N. A., Ngadi, N., Razmi, F. A., Inuwa, I. M., Mat, R., & Amin, N. A. S. (2020) · Scientific Reports · doi:10.1038/s41598-020-60021-6 · Cited by 394
Lin, G., Zeng, B., Li, J., Wang, Z., Wang, S., Hu, T., & Zhang, L. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.141710 · Cited by 323
Kumar, P., Patel, A. K., Singhania, R. R., Chen, C.-W., Saratale, R. G., & Dong, C.-D. (2023) · Bioresource Technology · doi:10.1016/j.biortech.2023.129654 · Cited by 60
Anoob, F., Arachchi, S., Azamathulla, H. M., Al-mahbashi, N., & Rathnayake, U. (2024) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2024.100639 · Cited by 42
Metadata
- Authors
- Khayyun, T. S., & Mseer, A. H.
- Venue
- Applied Water Science
- Published
- 2019-10-14
- Volume
- 9
- Issue
- 8
- ISSN
- 2190-5487 (ISSN-L)
- 2190-5495
- OpenAlex
- W2980818847
- Cited by
- 261
- References
- 3
- FWCI
- 8.54
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Comparison of the experimental results with the Langmuir and Freundlich models for copper removal on limestone adsorbent. https://app.cochat.ai/papers/10.1007/s13201-019-1061-2
- The paper
- Khayyun, T. S., & Mseer, A. H. (2019). Comparison of the experimental results with the Langmuir and Freundlich models for copper removal on limestone adsorbent. Applied Water Science. https://doi.org/10.1007/s13201-019-1061-2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.