Preparation and characterization of aluminum oxide nanoparticles by laser ablation in liquid as passivating and anti-reflection coating for silicon photodiodes
Open accessThe DOI matches its Crossref record; 38 of the 39 references it cites were found in a registry or an index.
Abstract
In this study, we have prepared aluminum oxide (Al 2 O 3 nanoparticles) NPs with size ranging from 50 to 90 nm by laser ablation of aluminum target in ethanol. The effect of laser fluence on the structural, morphological and optical properties of Al 2 O 3 was demonstrated and discussed. X-ray diffraction XRD results confirm that the synthesized Al 2 O 3 NPs are crystalline in nature. The sample prepared at 3.5 J/cm 2 /pulse exhibits single phase of γ-Al 2 O 3 , while the XRD patterns of the nanoparticles synthesized at 5.3 and 7.5 J/cm 2 /pulse show the co-existence of the α-Al 2 O 3 and γ-Al 2 O 3 phases. Nanostructured Al 2 O 3 films have been used as anti-reflecting coating and surface passivation layer to improve the photoresponse characteristics of silicon photodiode. The experimental data showed that the optical energy gap decreases from 5.3 to 5 eV as the laser fluence increases from 3.5 to 7.3 J/cm 2 . The lowest optical reflectivity was found for silicon photodiode deposited with a single layer of Al 2 O 3 prepared at 3.5 J/cm 2 /pulse. The effect of laser fluence on the refractive index and extinction coefficient of the nanostructured Al 2 O 3 film was studied. The photosensitivity of the silicon photodiode increased from 0.4 to 1.4 AW −1 at 800 nm after depositing Al 2 O 3 prepared at 3.5 J/cm 2 /pulse, followed by rapid thermal annealing at 400 °C for 60 s.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures













Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wooten, F., & Davis, S. P. (1973) · American Journal of Physics · doi:10.1119/1.1987434 · Cited by 4,518
Low-Temperature Al2O3 Atomic Layer Deposition
Groner, M. D., Fabreguette, F. H., Elam, J. W., & George, S. M. (2004) · Chemistry of Materials · doi:10.1021/cm0304546 · Cited by 1,403 · cited 1×
“…in many industrial applications, such as catalyst, surface passivation, ant-reflection coating, sensors, gas diffusion barrier, abrasive materials and nanolaminates (Farsi and Gobal 2007; Tania et al. 1999; Dingemans and Kessels 2012; Groner et al. 2004; Tallarida et al. 2011 )Garces et al. 2014.”
BackgroundStatus and prospects of Al2O3-based surface passivation schemes for silicon solar cells
Dingemans, G., & Kessels, W. M. M. (2012) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.4728205 · Cited by 818 · cited 1×
“…in many industrial applications, such as catalyst, surface passivation, ant-reflection coating, sensors, gas diffusion barrier, abrasive materials and nanolaminates (Farsi and Gobal 2007; Tania et al. 1999; Dingemans and Kessels 2012; Groner et al. 2004; Tallarida et al. 2011 )Garces et al. 2014.”
BackgroundSilicon surface passivation by atomic layer deposited Al2O3
Hoex, B., Schmidt, J., Pohl, P., van de Sanden, M. C. M., & Kessels, W. M. M. (2008) · Journal of Applied Physics · doi:10.1063/1.2963707 · Cited by 479 · cited 1×
“Two possible surface passivation types can occur after the deposition of the alumina layer, the first one called chemical passivation and the second type called field-effect passivation (Benjamin et al. 2012; Hoex et al. 2008; SaintCast et al. 2010; Terlinden et al. 2010).”
BackgroundCava, S., Tebcherani, S. M., Souza, I. A., Pianaro, S. A., Paskocimas, C. A., Longo, E., & Varela, J. A. (2007) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2007.02.046 · Cited by 265 · cited 1×
“It is reported (Cava et al. 2007) that for nano powder alumina prepared by the polymeric precursor method, the alpha alumina phase could be formed by heat treatment at a temperature of 1050 C, while the gamma alumina phase formed at a temperature of around 900 C.”
MethodAlumina chemicals : science and technology handbook
Hart, L. D., & Lense, E. (1990) · American Ceramic Society eBooks · Cited by 247
Tilaki, R. M., Iraji zad, A., & Mahdavi, S. M. (2007) · Applied Physics A · doi:10.1007/s00339-007-4000-2 · Cited by 234 · cited 1×
“This result can be ascribed to the increase of the particle size and the number of Al2O3 particles with laser fluence, which in turn increase the optical absorption (Tilaki et al. 2007).”
BackgroundShamala, K. S., Murthy, L. C. S., & Narasimha Rao, K. (2004) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2003.09.036 · Cited by 190
Piriyawong, V., Thongpool, V., Asanithi, P., & Limsuwan, P. (2012) · Journal of Nanomaterials · doi:10.1155/2012/819403 · Cited by 175 · cited 1×
“The reported data showed that the optical, structural and mechanical properties of Al2O3 nanoparticles prepared by PLAL depended on many parameters such as laser energy, laser wavelength, ablation time, laser pulse duration and liquid type (Piriyawong et al. 2012; Emmanue et al. 2009).”
BackgroundNear-unity quantum efficiency of broadband black silicon photodiodes with an induced junction
Juntunen, M. A., Heinonen, J., Vähänissi, V., Repo, P., Valluru, D., & Savin, H. I. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.226 · Cited by 172 · cited 1×
“Furthermore, the alumina deposition increases the charger’s carrier collection efficiency through formation of an inversion layer (Mikko et al. 2016).”
BackgroundGeneration of Al nanoparticles via ablation of bulk Al in liquids with short laser pulses
Stratakis, E., Barberoglou, M., Fotakis, C., Viau, G., Garcia, C., & Shafeev, G. A. (2009) · Optics Express · doi:10.1364/oe.17.012650 · Cited by 162 · cited 1×
“The reported data showed that the optical, structural and mechanical properties of Al2O3 nanoparticles prepared by PLAL depended on many parameters such as laser energy, laser wavelength, ablation time, laser pulse duration and liquid type (Piriyawong et al. 2012; Emmanue et al. 2009).”
BackgroundHigh-Efficiency c-Si Solar Cells Passivated With ALD and PECVD Aluminum Oxide
Saint‐Cast, P., Benick, J., Kania, D., Weiss, L., Hofmann, M., Rentsch, J., Preu, R., & Glunz, S. W. (2010) · IEEE Electron Device Letters · doi:10.1109/led.2010.2049190 · Cited by 151
Study of Nanocrystalline γ-Al2O3 Produced by High-Pressure Compaction
Costa, T. M. H., Gallas, M. R., Benvenutti, E. V., & da Jornada, J. A. H. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp983791o · Cited by 149 · cited 1×
“…in many industrial applications, such as catalyst, surface passivation, ant-reflection coating, sensors, gas diffusion barrier, abrasive materials and nanolaminates (Farsi and Gobal 2007; Tania et al. 1999; Dingemans and Kessels 2012; Groner et al. 2004; Tallarida et al. 2011 )Garces et al. 2014.”
Backgroundγ-Al2O3nanoparticles synthesised by pulsed laser ablation in liquids: a plasma analysis
Lam, J., Amans, D., Chaput, F., Diouf, M., Ledoux, G., Mary, N., Masenelli-Varlot, K., Motto-Ros, V., & Dujardin, C. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c3cp53748j · Cited by 143
Size-controlled synthesis of nano α-alumina particles through the sol–gel method
Mirjalili, F., Hasmaliza, M., & Abdullah, L. C. (2010) · Ceramics International · doi:10.1016/j.ceramint.2010.01.009 · Cited by 141 · cited 2×
“Many techniques were used to prepare Al2O3 nanoparticles such as sol–gel (Mirjalili et al. 2010), sputtering (Trinh et al.”
MethodRole of field-effect on c-Si surface passivation by ultrathin (2–20 nm) atomic layer deposited Al2O3
Terlinden, N. M., Dingemans, G., van de Sanden, M. C. M., & Kessels, W. M. M. (2010) · Applied Physics Letters · doi:10.1063/1.3334729 · Cited by 139
Hydrothermal synthesis of alumina nanotubes templated by anionic surfactant
Qu, L., He, C., Yang, Y., He, Y., & Liu, Z. (2005) · Materials Letters · doi:10.1016/j.matlet.2005.07.059 · Cited by 117 · cited 2×
“Many techniques were used to prepare Al2O3 nanoparticles such as sol–gel (Mirjalili et al. 2010), sputtering (Trinh et al. 2008), spray (Kavitha and Jayaram 2006), hydrothermal (Qu et al. 2005), mechanical milling (Reid et al. 2008) and laser ablation (Yatsui et al. 2000).”
BackgroundMethodOptical properties of amorphous Al2O3 thin films prepared by a sol–gel process
Hu, B., Yao, M., Xiao, R., Chen, J., & Yao, X. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.05.148 · Cited by 108
Conjugation Efficiency of Laser-Based Bioconjugation of Gold Nanoparticles with Nucleic Acids
Petersen, S., & Barcikowski, S. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp905962f · Cited by 100 · cited 2×
“nanoparticles; the process is cost-effective and fast (Petersen and Barcikowski 2009; Yang et al. 2007).”
BackgroundUltra fine carbon nitride nanocrystals synthesized by laser ablation in liquid solution
Yang, L., May, P. W., Yin, L., Smith, J. A., & Rosser, K. N. (2007) · Journal of Nanoparticle Research · doi:10.1007/s11051-006-9192-4 · Cited by 99 · cited 2×
“nanoparticles; the process is cost-effective and fast (Petersen and Barcikowski 2009; Yang et al. 2007).”
BackgroundA study in the mechanical milling of alumina powder
Reid, C. B., Forrester, J. S., Goodshaw, H. J., Kisi, E. H., & Suaning, G. J. (2007) · Ceramics International · doi:10.1016/j.ceramint.2007.05.003 · Cited by 95 · cited 2×
“2005), mechanical milling (Reid et al. 2008) and laser”
MethodSilicon solar cells with Al2O3 antireflection coating
Dobrzański, L. A., Szindler, M., Drygała, A., & Szindler, M. (2014) · Open Physics · doi:10.2478/s11534-014-0500-9 · Cited by 79
Nanocomposite Al2O3–ZrO2 thin films grown by reactive dual radio-frequency magnetron sputtering
Trinh, D. H., Ottosson, M., Collin, M., Reineck, I., Hultman, L., & Högberg, H. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2007.10.001 · Cited by 64 · cited 1×
“Many techniques were used to prepare Al2O3 nanoparticles such as sol–gel (Mirjalili et al. 2010), sputtering (Trinh et al. 2008), spray (Kavitha and Jayaram 2006), hydrothermal (Qu et al. 2005), mechanical milling (Reid et al. 2008) and laser ablation (Yatsui et al. 2000).”
MethodPreparation and characterization of nanostructured nickel oxide thin films by spray pyrolysis
Ismail, R. A., Ghafori, S., & Kadhim, G. A. (2012) · Applied Nanoscience · doi:10.1007/s13204-012-0152-2 · Cited by 61 · cited 1×
“Furthermore, the phase transition and stoichiometry may also play a role in the variation of the energy gap of the metal oxide (Ismail et al. 2013).”
BackgroundSelf-citationIsmail, R. A., Al‐Jawad, S. M. H., & Hussein, N. (2014) · Applied Physics A · doi:10.1007/s00339-014-8605-y · Cited by 56 · cited 1×
“This value is larger than that for wide band-gap silicon-based heterojunction photodetectors (Ismail et al. 2006; Ismail et al. 2005, 2014).”
BackgroundSelf-citationImproved characteristics of sprayed CdO films by rapid thermal annealing
Ismail, R. A. (2009) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-009-9855-x · Cited by 50 · cited 1×
“The deposition of nanostructured Al2O3 followed by RTA plays a positive role in the reduction of the series resistance of the photodiode through decreasing the surface state defect density (Ismail 2009).”
BackgroundSelf-citationSynthesis of Ultrafine γ-Al2O3 Powders by Pulsed Laser Ablation
Yatsui, K., Yukawa, T., Grigoriu, C., Hirai, M., & Jiang, W. (2000) · Journal of Nanoparticle Research · doi:10.1023/a:1010090115429 · Cited by 49 · cited 1×
“Many techniques were used to prepare Al2O3 nanoparticles such as sol–gel (Mirjalili et al. 2010), sputtering (Trinh et al. 2008), spray (Kavitha and Jayaram 2006), hydrothermal (Qu et al. 2005), mechanical milling (Reid et al. 2008) and laser ablation (Yatsui et al. 2000).”
MethodPREPARATION AND PHOTOVOLTAIC PROPERTIES OF Ag 2 O/Si ISOTYPE HETEROJUNCTION
Ismail, R. A., Yahiya, K. Z., & Abdulrazzaq, O. A. (2005) · Surface Review and Letters · doi:10.1142/s0218625x05007074 · Cited by 48 · cited 1×
“This value is larger than that for wide band-gap silicon-based heterojunction photodetectors (Ismail et al. 2006; Ismail et al. 2005, 2014).”
BackgroundSelf-citationDeposition and characterization of alumina films produced by combustion flame pyrolysis
Kavitha, R., & Jayaram, V. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.04.022 · Cited by 36 · cited 2×
“2008), spray (Kavitha and Jayaram 2006), hydrothermal (Qu et al.”
MethodFarsi, H., & Gobal, F. (2006) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-006-0242-8 · Cited by 32 · cited 1×
“…in many industrial applications, such as catalyst, surface passivation, ant-reflection coating, sensors, gas diffusion barrier, abrasive materials and nanolaminates (Farsi and Gobal 2007; Tania et al. 1999; Dingemans and Kessels 2012; Groner et al. 2004; Tallarida et al. 2011 )Garces et al. 2014.”
BackgroundPreparation of nano-structured ceramics using nanosized Al2O3 particles
Noda, H., Muramoto, K., & Kim, H. (2003) · Journal of Materials Science · doi:10.1023/a:1023553925110 · Cited by 30 · cited 1×
“Metal oxide nanoparticles have drawn attention due to their stable optical, electrical and structural properties (Hart 1990, Noda and Muramoto 2003).”
BackgroundAtomic layer deposition of nanolaminate oxide films on Si
Tallarida, M., Weisheit, M., Kolanek, K., Michling, M., Engelmann, H. J., & Schmeißer, D. (2011) · Journal of Nanoparticle Research · doi:10.1007/s11051-011-0319-x · Cited by 30 · cited 1×
“…in many industrial applications, such as catalyst, surface passivation, ant-reflection coating, sensors, gas diffusion barrier, abrasive materials and nanolaminates (Farsi and Gobal 2007; Tania et al. 1999; Dingemans and Kessels 2012; Groner et al. 2004; Tallarida et al. 2011 )Garces et al. 2014.”
BackgroundCharacteristics of γ-Al2O3 nanoparticles generated by continuous-wave laser ablation in liquid
Khan, S. Z., Liu, Z., & Li, L. (2010) · Applied Physics A · doi:10.1007/s00339-010-5936-1 · Cited by 24 · cited 1×
“Increasing the laser fluence to 7.3 J/cm2 results in decreasing the optical energy gap due to increase of the particle size and maybe due to agglomeration of alumina particles (Khan et al. 2010; Julien et al. 2014).”
BackgroundInfluentialPlasma-assisted atomic layer deposition of nanolaminates for gate dielectric applications
Garces, N. Y., Meyer, D. J., Wheeler, V. D., Liliental-Weber, Z., Gaskill, D. K., & Eddy, C. R. (2013) · Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena · doi:10.1116/1.4818254 · Cited by 22 · cited 1×
“…in many industrial applications, such as catalyst, surface passivation, ant-reflection coating, sensors, gas diffusion barrier, abrasive materials and nanolaminates (Farsi and Gobal 2007; Tania et al. 1999; Dingemans and Kessels 2012; Groner et al. 2004; Tallarida et al. 2011 )Garces et al. 2014.”
BackgroundOptical properties of ideal γ-Al 2 O 3 and with oxygen point defects: an ab initio study
Papi, H., Jalali-Asadabadi, S., Nourmohammadi, A., Ahmad, I., Nematollahi, J., & Yazdanmehr, M. (2015) · RSC Advances · doi:10.1039/c5ra06027c · Cited by 15
Nguyen, H. T. T., Balaji, N., Park, C., Triet, N. M., Le, A. H. T., Lee, S., Jeon, M., Oh, D., Dao, V. A., & Yi, J. (2017) · Semiconductor Science and Technology · doi:10.1088/1361-6641/32/2/025005 · Cited by 14
Li, Y., Zhao, Y., Li, X., Zhang, Z.-G., Ye, X., Zhong, J., Cai, L., & Zhang, L. (2016) · AIP Advances · doi:10.1063/1.4942089 · Cited by 12
Comparative study of physical properties of vapor chopped and nonchopped Al2O3 thin films
Tamboli, S. H., Puri, V. R., Puri, R. K., Patil, R. B., & Luo, M. F. (2011) · Materials Research Bulletin · doi:10.1016/j.materresbull.2011.02.037 · Cited by 10 · cited 2×
“4 eV; this value is lower than that of bulk alumina due to the presence of oxygen vacancies and point defects (Papi et al. 2015; Tamboli et al. 2011).”
BackgroundInfluential
Research works printed but not linked: 2
- Benjamin L, Jarmo S, Ville M, Shuo L, Sukgeun C, Howard B (2012) Excellent passivation and low-reflectivity Al 2 O 3 /TiO 2 bilayer coatings for n-wafer silicon solar cells. In: IEEE photovoltaic specialists conference Austin, Texas, 3-8 June 2012, p
- Ismail R, Raouf D, Raouf DF (2006) High efficiency In 2 O 3 /c-Si heterojunction solar cells produced by rapid thermal oxidation. J Optoelectron Adv Mater 8:1443
Cited by
Amendola, V., Amans, D., Ishikawa, Y., Koshizaki, N., Scirè, S., Compagnini, G., Reichenberger, S., & Barcikowski, S. (2020) · Chemistry – A European Journal · doi:10.1002/chem.202000686 · Cited by 354
Pulsed Laser in Liquids Made Nanomaterials for Catalysis
Forsythe, R. C., Cox, C. P., Wilsey, M. K., & Müller, A. M. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01069 · Cited by 259
Nanoparticles as fingermark sensors
Sharma, V., Choudhary, S., Mankotia, P., Kumari, A., Sharma, K., Sehgal, R., & Kumar, V. (2021) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2021.116378 · Cited by 82
Nduni, M. N., Osano, A. M., & Chaka, B. (2021) · Cleaner Engineering and Technology · doi:10.1016/j.clet.2021.100108 · Cited by 76
Attallah, A. H., Abdulwahid, F. S., Ali, Y. A., & Haider, A. J. (2023) · Plasmonics · doi:10.1007/s11468-023-01852-7 · Cited by 73
Metadata
- Authors
- Ismail, R. A., Zaidan, S. A., & Kadhim, R. M.
- Affiliations
- University of Technology - Iraq (IQ)
- Corresponding author
- Ismail, Raid A.
- Venue
- Applied Nanoscience
- Published
- 2017-08-12
- Volume
- 7
- Issue
- 7
- Pages
- 477-487
- ISSN
- 2190-5509 (ISSN-L)
- 2190-5517
- OpenAlex
- W2743586609
- Cited by
- 89
- References
- 39
- Citations by year
- 2026: 9 · 2025: 9 · 2024: 11 · 2023: 18 · 2022: 16 · 2021: 13 · 2020: 8 · 2019: 3 · 2018: 2
- FWCI
- 1.60
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Applied Nanoscience (publishedVersion, cc-by)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
- Physical Sciences › Materials Science › Materials Chemistry › Silicon Nanostructures and Photoluminescence
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Optical Coatings and Gratings
- Keywords
- Al2O3 nanoparticles, laser ablation in liquid, silicon photodiodes, antireflection coatings, surface passivation, laser fluence, gamma-alumina, alpha-alumina, optical band gap, optical reflectivity, refractive index, extinction coefficient, photosensitivity, rapid thermal annealing, ethanol
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.