The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Nano-enhanced biolubricant in sustainable manufacturing: From processability to mechanisms
Open accessAbstract
To eliminate the negative effect of traditional metal-working fluids and achieve sustainable manufacturing, the usage of nano-enhanced biolubricant (NEBL) is widely researched in minimum quantify lubrication (MQL) machining. It’s improved tool wear and surface integrity have been preliminarily verified by experimental studies. The previous review papers also concluded the major influencing factors of processability including nano-enhancer and lubricant types, NEBL concentration, micro droplet size, and so on. Nevertheless, the complex action of NEBL, from preparation, atomization, infiltration to heat transfer and anti-friction, is indistinct which limits preparation of process specifications and popularity in factories. Especially in the complex machining process, in-depth understanding is difficult and meaningful. To fill this gap, this paper concentrates on the comprehensive quantitative assessment of processability based on tribological, thermal, and machined surface quality aspects for NEBL application in turning, milling, and grinding. Then it attempts to answer mechanisms systematically considering multi-factor influence of molecular structure, physicochemical properties, concentration, and dispersion. Firstly, this paper reveals advanced lubrication and heat transfer mechanisms of NEBL by quantitative comparison with biolubricant-based MQL machining. Secondly, the distinctive filmformation, atomization, and infiltration mechanisms of NEBL, as distinguished from metal-working fluid, are clarified combining with its unique molecular structure and physical properties. Furtherly, the process optimization strategy is concluded based on the synergistic relationship analysis among process variables, physicochemical properties, machining mechanisms, and performance of NEBL. Finally, the future development directions are put forward aiming at current performance limitations of NEBL, which requires improvement on preparation and jet methods respects. This paper will help scientists deeply understand effective mechanism, formulate process specifications, and find future development trend of this technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chieruzzi, M., Cerritelli, G. F., Miliozzi, A., & Kenny, J. M. (2013) · Nanoscale Research Letters · doi:10.1186/1556-276x-8-448 · Cited by 381
Cited by
Carbon fiber reinforced polymer in drilling: From damage mechanisms to suppression
Gao, T., Li, C., Wang, Y., Liu, X., An, Q., Li, H. N., Zhang, Y., Cao, H., Liu, B., Wang, D., et al. (2022) · Composite Structures · doi:10.1016/j.compstruct.2022.115232 · Cited by 275
Self-citationExtreme pressure and antiwear additives for lubricant: academic insights and perspectives
Li, H., Zhang, Y., Li, C., Zhou, Z., Nie, X., Chen, Y., Cao, H., Liu, B., Zhang, N., Said, Z., et al. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-08614-x · Cited by 258
Self-citation
Metadata
- Authors
- Zhang, Y., Li, H. N., Li, C., Huang, C., Ali, H. M., Xu, X., Mao, C., Ding, W., Cui, X., Yang, M., Yu, T., Jamil, M., Gupta, M. K., Jia, D., & Said, Z.
- Venue
- Friction
- Publisher
- Tsinghua University Press
- Published
- 2022-01-14
- Volume
- 10
- Issue
- 6
- Pages
- 803-841
- ISSN
- 2223-7690 (ISSN-L)
- 2223-7704
- OpenAlex
- W4206313494
- Cited by
- 238
- References
- 1
- FWCI
- 19.13
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Nano-enhanced biolubricant in sustainable manufacturing: From processability to mechanisms. https://app.cochat.ai/papers/10.1007/s40544-021-0536-y
- The paper
- Zhang, Y., Li, H. N., Li, C., Huang, C., Ali, H. M., Xu, X., Mao, C., Ding, W., Cui, X., Yang, M., Yu, T., Jamil, M., Gupta, M. K., Jia, D., & Said, Z. (2022). Nano-enhanced biolubricant in sustainable manufacturing: From processability to mechanisms. Friction. https://doi.org/10.1007/s40544-021-0536-y
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.