Poison-proofing platinum nanocatalysts with nitrogen for industrial-scale seawater splitting
The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index; 7 of the 22 sources its claims cite were checked for support.
Overview
CoChat Summary
TL;DR
The authors anchor ultrasmall Pt nanoparticles onto a porous N-doped carbon aerogel on carbon fiber paper (Pt@N/CFP), using Pt–N bonding to both lower the water-dissociation barrier and shield Pt sites from chloride poisoning. The catalyst reaches 1000 mA cm⁻² at 318 mV overpotential in 1 M KOH and 308 mV in alkaline seawater, and an AEM electrolyzer holds 1.688 V at 1000 mA cm⁻² for over 300 h.
Key findings
- In 1 M KOH, Pt@N/CFP achieves overpotentials of 23, 75, 201, and 318 mV at 10, 100, 500, and 1000 mA cm⁻², versus 20, 117, 380, and 570 mV for commercial 20% Pt/C; Tafel slope is 24 mV dec⁻¹ (Pt/C: 30; N/CFP: 271), and maximum current density reaches 1600 mA cm⁻².
- Mass activity at 200 mV overpotential is 4.4 A mg_Pt⁻¹, twice that of 20% Pt/C (2.07 A mg_Pt⁻¹); R_ct is 1.2 Ω versus 10 Ω for N/CFP, and C_dl is 22.84 mF cm⁻².
- In alkaline seawater, Tafel slope is 23 mV dec⁻¹ and overpotential at 1000 mA cm⁻² is 308 mV; at 200 mA cm⁻² the voltage decay rate is 0.3079 mV h⁻¹ over 100 h versus 1.7843 mV h⁻¹ for Pt/C.
- DFT shows the H₂O dissociation barrier drops from 0.49 eV on Pt(111) to 0.35 eV on Pt@N, ΔG_H* is +0.05 eV (vs −0.13 eV on Pt), and the Pt d-band center downshifts from −2.919 eV to −3.022 eV, making Cl⁻ adsorption thermodynamically less favorable.
- In an AEM electrolyzer (NiFe-LDH anode, Pt@N/CFP cathode) with 1.0 M KOH + seawater at 80 °C, cell voltages are 1.688 V at 1 A cm⁻² and 1.831 V at 2 A cm⁻², with 300 h stability at 1000 mA cm⁻² and no noticeable degradation.
Methods
- Synthesis: carbon fiber paper immersed in acrylamide/chitosan solution to form a hydrogel, soaked in H₂PtCl₆, then freeze-dried and pyrolyzed to give Pt@N/CFP; Pt loading ~0.114 mg cm⁻² by ICP-MS.
- Characterization: SEM/TEM/HRTEM, EDS mapping, XRD, XPS (Pt 4f, N 1s, C 1s, O 1s); Pt nanoparticles average 2.8 nm with 0.228 nm lattice spacing assigned to Pt(111).
- Electrochemistry: three-electrode tests in 1 M KOH and 1 M KOH + seawater (plus 0–2.0 M NaCl poisoning tests), LSV, Tafel, EIS, C_dl, 1000 CV cycles, chronopotentiometry; complemented by DFT (Pt(111) vs Pt@N) and molecular dynamics simulations of ion/water distribution under external electric fields.
Limitations
- Not stated in the paper: the paper reports no explicit limitations section.
- Evident from the text: the Cl⁻-poisoning comparison in 0–2.0 M NaCl is described as simulated alkaline seawater, and the AEM stability test is 300 h at a single current density (1000 mA cm⁻²), so longer-term and variable-load durability is not demonstrated.
- Evident from the text: the catalyst still uses Pt (0.114 mg cm⁻²), and the paper's own cost rationale rests on mass activity rather than on a cost analysis or Pt-free alternative.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
7 Valid · 2 Not valid · 7 Not checked · 48 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Carbon supports have found widespread use”
What the sources say
- Not checked — no full text of the sourcecites [19] Li C, Kim SH, Lim HY, et al. Self-accommodation induced electronic metal-support interaction on ruthenium site for alkaline hydrogen evolution reaction. Adv Mater, 2023, 35: 2301369 source
- Partly supportedcites [20] Chen K, Wang Z, Wang L, et al. Boron nanosheet-supported Rh catalysts for hydrogen evolution: a new territory for the strong metal-support interaction effect. Nano-Micro Lett, 2021, 13: 138 sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) says metal atoms tend to agglomerate because of their high surface free energy, limiting theoretical atom utilization. It also says porous carbon supports do not achieve complete participation of metal active sites. It does not say that weak binding between metals and carbon supports causes the agglomeration. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Moreover, the abundant amino groups in”
What the sources say
- Not checked — no full text of the sourcecites [30] Mincke S, Asere TG, Verheye I, et al. Functionalized chitosan adsorbents allow recovery of palladium and platinum from acidic aqueous solutions. Green Chem, 2019, 21: 2295–2306 source
- Partly supportedcites [31] Diao L, Zhang C, Yang X, et al. Sustainable chitosan hydrogen derived platinum/N-doped carbon aerogel for efficient oxygen reduction and hydrogen evolution reactions. Mater Today Sustainability, 2023, 23: 100408 sourceExperimental — accuracy not yet measured
Section 3.1 (page not supplied) reports that protonated amino groups in chitosan interact electrostatically with PtCl₆²⁻ ions, and elemental mapping shows uniform Pt distribution in the resulting catalyst. The paper does not establish that this interaction ensures the long-term stability of the metal particles; its reported stability measure is retention of catalytic current. (LLM, conf=0.83)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“achieving a low cell voltage of 1.688 V at an industrial-grade current density of”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“maintaining outstanding stability for over”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Both Pt/C and the designed Pt@N/CFP cata”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
27 more claims
Create a free account to see all 64 claims and every source verdict.
- It may state two separate claims as one. 24
- Probably not a substantial claim. 8
- The quote only partly states this claim. 8
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ RESULTS AND DISCUSSION
“distinct characteristic signals corresponding to C, N, O, and Pt are evident in both N/CFP and Pt@N/CFP.”
§ RESULTS AND DISCUSSION
“The N/CFP without Pt shows the 3D porous network with a nanosheet structure”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 6 © Science China Press 2026
“the Pt@N surface (Fig. 6C) and Pt surface (Fig. 6D)”
§ 4 © Science China Press 2026
“The number of H 2O molecules of (C) Pt and (D) Pt@N in the presence of static external electric fields.”
Citations
Cites
Shi, Y., Ma, Z.-R., Xiao, Y.-Y., Yin, Y.-C., Huang, W.-M., Huang, Z.-C., Zheng, Y.-Z., Mu, F.-Y., Huang, R., Shi, G.-Y., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-23306-6 · Cited by 894 · cited 1×
“Furthermore, electron transfer modulates the d-band structure of metal nanocatalysts, strengthens the adsorption of reaction intermediates, lowers the reaction energy barrier, and speeds up the rate-limiting elementary step [18].”
Zhao, L., Zhang, Y., Huang, L.-B., Liu, X.-Z., Zhang, Q.-H., He, C., Wu, Z.-Y., Zhang, L.-J., Wu, J., Yang, W., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09290-y · Cited by 865
Zhou, K. L., Wang, Z., Han, C. B., Ke, X., Wang, C., Jin, Y., Zhang, Q., Liu, J., Wang, H., & Yan, H. (2021) · Nature Communications · doi:10.1038/s41467-021-24079-8 · Cited by 765 · cited 1×
“2F, the Pt 4f spectrum of Pt@N/CFP electrocatalyst can be divided into two pairs of peaks, which can be ascribed to the metallic state of Pt (Pt 0 ) and oxidized state of Pt (Pt 2+ ), respectively [32,33].”
He, L., Weniger, F., Neumann, H., & Beller, M. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201603198 · Cited by 618 · cited 1×
“Heteroatom incorporation into carbon matrix lattices or the attachment of functional groups to carbon surfaces enables substantial modulation of carbon support functionalities, which in turn affects their interactions with supported metal particles [21,22].”
Is direct seawater splitting economically meaningful?
Hausmann, J. N., Schlögl, R., Menezes, P. W., & Driess, M. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03659e · Cited by 388 · cited 1×
“Particularly, seawater, which makes up 96.5% of the planet’s total water, can be used for electrolysis processes [8].”
InfluentialLi, C., Wang, Z., Liu, M., Wang, E., Wang, B., Xu, L., Jiang, K., Fan, S., Sun, Y., Li, J., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-31077-x · Cited by 221
Wang, X., Zhou, X., Li, C., Yao, H., Zhang, C., Zhou, J., Xu, R., Chu, L., Wang, H., Gu, M., et al. (2022) · Advanced Materials · doi:10.1002/adma.202204021 · Cited by 213 · cited 1×
“Aggressive Cl − ions tend to induce corrosion of metal-based catalytic materials, which significantly compromises the catalytic performance of seawater splitting systems toward ORR, OER, and HER [37,38].”
Comprehensive overview of polyoxometalates for electrocatalytic hydrogen evolution reaction
Zeb, Z., Huang, Y., Chen, L., Zhou, W., Liao, M., Jiang, Y., Li, H., Wang, L., Wang, L., Wang, H., et al. (2023) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2023.215058 · Cited by 208
Self-citationHydro-locking in hydrogel for extreme temperature tolerance
Zhang, X., Li, D., Yang, X., Wang, L., Li, G., Wong, T.-W., Li, T., Yang, W., & Luo, Z. (2025) · Science · doi:10.1126/science.adq2711 · Cited by 183
Li, C., Kim, S. H., Lim, H. Y., Sun, Q., Jiang, Y., Noh, H., Kim, S., Baek, J., Kwak, S. K., & Baek, J. (2023) · Advanced Materials · doi:10.1002/adma.202301369 · Cited by 178
An ultra-low Pt metal nitride electrocatalyst for sustainable seawater hydrogen production
Hu, H., Zhang, Z., Zhang, Y., Thomas, T., Du, H., Huang, K., Attfield, J. P., & Yang, M. (2023) · Energy & Environmental Science · doi:10.1039/d3ee01541f · Cited by 161 · cited 2×
“This corrosion process is proposed to initiate with the adsorption of chloride ions onto the metal surface (M + Cl − → MCl ads ), which is then followed by the formation of soluble chloro-complex species (MCl ads + Cl − → MCl xy − ) [39].”
Mincke, S., Asere, T. G., Verheye, I., Folens, K., Vanden Bussche, F., Lapeire, L., Verbeken, K., Van Der Voort, P., Tessema, D. A., Fufa, F., et al. (2019) · Green Chemistry · doi:10.1039/c9gc00166b · Cited by 138
Confining Zero‐Valent Platinum Single Atoms in α‐MoC1−x for pH‐Universal Hydrogen Evolution Reaction
Wang, W., Wu, Y., Lin, Y., Yao, J., Wu, X., Wu, C., Zuo, X., Yang, Q., Ge, B., Yang, L., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202108464 · Cited by 107
Lin, G., Dong, A., Li, Z., Li, W., Cao, X., Zhao, Y., Wang, L., & Sun, L. (2025) · Advanced Materials · doi:10.1002/adma.202507525 · Cited by 93 · cited 1×
“In contrast, under high current density conditions, the electrochemical HER becomes more vigorous, along with faster consumption of reactants and greater bubble barriers, thereby leading to lower HER kinetics and shortening the service life of catalysts [14–16].”
Self-citationHan, Y., Duan, H., Liu, W., Zhou, C., Wang, B., Jiang, Q., Feng, S., Yan, W., Tan, T., & Zhang, R. (2023) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2023.122898 · Cited by 80
Strong Metal‐Support Interactions through Sulfur‐Anchoring of Metal Catalysts on Carbon Supports
Yin, P., Yan, Q., & Liang, H. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202302819 · Cited by 80 · cited 1×
“Heteroatom incorporation into carbon matrix lattices or the attachment of functional groups to carbon surfaces enables substantial modulation of carbon support functionalities, which in turn affects their interactions with supported metal particles [21,22].”
Self-citationChen, K., Wang, Z., Wang, L., Wu, X., Hu, B., Liu, Z., & Wu, M. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00662-y · Cited by 77
Wang, H., Jiao, Y., Zhang, G., Ma, W., Fan, W., Liu, X., Zhao, Y., Xie, H., Ma, W., & Zong, X. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202418617 · Cited by 74 · cited 1×
“Engineering strong metal-support interactions (SMSI) is a proven strategy that allows active metals to be stabilized in electron-deficient states by creating thermodynamically stable metal-support bonding interactions [17].”
Da, Y., Jiang, R., Tian, Z., Chen, G., Xiao, Y., Zhang, J., Xi, S., Deng, Y., Chen, W., Han, X., et al. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202300127 · Cited by 71
Song, M.-H., Kim, S., Reddy, D. H. K., Wei, W., Bediako, J. K., Park, S., & Yun, Y. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.11.047 · Cited by 67
Li, J., Zhou, Y., Tang, W., Zheng, J., Gao, X., Wang, N., Chen, X., Wei, M., Xiao, X., & Chu, W. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119861 · Cited by 65
Chen, L., Huang, Y., Ding, Y., Yu, P., Huang, F., Zhou, W., Wang, L., Jiang, Y., Li, H., Cai, H., et al. (2023) · Nano Research · doi:10.1007/s12274-023-5666-2 · Cited by 63
Self-citationShi, X., Gu, W., Zhang, B., Zhao, Y., Zhang, A., Xiao, W., Wei, S., & Pang, H. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202423760 · Cited by 57
Salah, A., Ren, H., Al‐Ansi, N., Tan, H., Yu, F., Yanchun, L., Thamer, B. M., Al‐Salihy, A., Zhao, L., & Li, Y. (2023) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2023.04.094 · Cited by 56
Nie, N., Zhang, D., Wang, Z., Yu, W., Ge, S., Xiong, J., Gu, Y., Yang, B., Lai, J., & Wang, L. (2022) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2022.121808 · Cited by 55
Xiao, Y., Ying, J., Chen, J., Yang, X., Tian, G., Li, J., Janiak, C., & Yang, X. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202418264 · Cited by 47
Fu, X., Li, H., Zong, Y., Xiao, W., Wang, J., Li, H., Ma, T., Wu, Z., & Wang, L. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202512710 · Cited by 45
A gel electrolyte-based direct seawater electrolysis
Tang, W., Zhao, Z., Yang, D., Liu, Y., Zhu, L., Wu, Y., Lan, C., Jiang, W., Wu, Y., Liu, T., et al. (2025) · Energy & Environmental Science · doi:10.1039/d5ee00453e · Cited by 32
Yao, L., Wang, Y., Jiang, L., Wang, G., Chi, X., & Liu, Y. (2025) · Energy & Environmental Science · doi:10.1039/d4ee05066e · Cited by 30
Wang, L., gong, N., Zhou, Z., Zhang, Q., Peng, W., Li, Y., Zhang, F., & Fan, X. (2022) · Chinese Journal of Catalysis · doi:10.1016/s1872-2067(21)63982-7 · Cited by 28 · cited 1×
“A consensus exists that the catalytic activity of a catalyst in an acidic medium usually displays an activity enhancement of 2–3 orders of magnitude compared to that in alkaline conditions, owing to the insufficient proton supply [10].”
Zhang, H., Li, H., You, Z., Liang, J., Lei, D., & Cui, Y. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202507403 · Cited by 27
Yang, X., Wu, L., Wang, Y., Jia, B., Xiao, Y., Tian, G., Ying, J., Lu, Y., Wu, S., Geng, W., et al. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202526511 · Cited by 27
Zhang, X., Xiao, Y., Tian, G., Yang, X., Dong, Y., Zhang, F., & Yang, X. (2022) · Chemistry - A European Journal · doi:10.1002/chem.202202811 · Cited by 26
Tuning the Spin State of Co Accelerates Hydrogen Evolution Reaction of Pt Nanoparticles
Zheng, Q. C., An, W., Pan, J., Yu, F., Du, Y., Cui, J., Song, W., Xu, S., Wang, C., Huang, G., et al. (2025) · SusMat · doi:10.1002/sus2.266 · Cited by 19
Tsai, P.-Y., Chen, T., Chuang, W., & Hsu, S. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.123737 · Cited by 18
Zhang, Y., Yang, X., Zhou, Q., Li, J., Wang, X., Zhao, Z., & Zhang, Z. (2025) · Science China Materials · doi:10.1007/s40843-024-3201-3 · Cited by 15
Conductive Polymer Hydrogel‐Derived 3D Nanostructures for Energy and Environmental Electrocatalysis
Lin, S., Li, X., Yuan, D., Liu, Y., Jin, Z., & Li, P. (2024) · Small · doi:10.1002/smll.202406235 · Cited by 14
Xie, Q., Xiao, L., Zhao, X., Liu, Q., & Hu, G. (2025) · Materials Today · doi:10.1016/j.mattod.2025.05.013 · Cited by 14
Diao, L., Zhang, C., Yang, X., Zhang, N., Ren, J., Li, D., & Yang, D. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100408 · Cited by 13 · cited 1×
“Moreover, the abundant amino groups in chitosan can anchor Pt through interactions with Pt ions, thereby ensuring the uniform dispersion and stable existence of metal particles [30,31].”
He, H., Tian, J., Bai, X., Mao, C., Zhang, Y., Zhou, C., Peng, X. F., Yang, L., Wang, X., Wu, Q., et al. (2025) · Science China Materials · doi:10.1007/s40843-025-3510-0 · Cited by 6
Fu, X., Li, H., Zong, Y., Xiao, W., Wang, J., Li, H., Ma, T., Wu, Z., & Wang, L. (2025) · Angewandte Chemie · doi:10.1002/ange.202512710 · Cited by 4
Metadata
- Authors
- Liao, M., Yan, Q., Zhu, Q., Wang, S., Zhou, S., Dai, J., Huang, Y., & Li, Z.
- Affiliations
- Qingdao Binhai University (CN)
- China University of Petroleum, East China (CN)
- Qingdao University of Science and Technology (CN)
- Corresponding author
- Liao, Meihong
- Huang, Yichao
- Li, Zhenjiang
- Venue
- Science China Materials
- Published
- 2026-05-06
- Volume
- 69
- Issue
- 8
- Pages
- 4669-4677
- ISSN
- 2095-8226 (ISSN-L)
- 2199-4501
- OpenAlex
- W7161126577
- Semantic Scholar
- 3a23cd97bcdd7cdd1bcfa9bd4df13b838f848c59
- Cited by
- 0
- References
- 41
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springernature.com/gp/researchers/text-and-data-mining (tdm)
- www.springernature.com/gp/researchers/text-and-data-mining (vor)
- Locations
- Science China Materials (publishedVersion)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
- Keywords
- seawater electrolysis, hydrogen production, platinum nanocatalysts, nitrogen-doped carbon aerogel, metal-support interaction, catalyst stability, anion exchange membrane water electrolyzer, water dissociation, high current density
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.