The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Lithium Metal Anode Materials Design: Interphase and Host
Open accessAbstract
Li metal is the ultimate anode choice due to its highest theoretical capacity and lowest electrode potential, but it is far from practical applications with its poor cycle lifetime. Recent research progresses show that materials designs of interphase and host structures for Li metal are two effective ways addressing the key issues of Li metal anodes. Despite the exciting improvement on Li metal cycling capability, problems still exist with these methodologies, such as the deficient long-time cycling stability of interphase materials and the accelerated Li corrosion for high surface area three-dimensional composite Li anodes. As a result, Coulombic efficiency of Li metal is still not sufficient for full-cell cycling. In the near future, an interphase protected three-dimensional composite Li metal anode, combined with high performance novel electrolytes might be the ultimate solution. Besides, nanoscale characterization technologies are also vital for guiding future Li metal anode designs. Graphic Abstract:
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Atomic structure of sensitive battery materials and interfaces revealed by cryo–electron microscopy
Li, Y., Li, Y., Pei, A., Yan, K., Sun, Y., Wu, C.-L., Joubert, L.-M., Chin, R., Koh, A. L., Yu, Y., et al. (2017) · Science · doi:10.1126/science.aam6014 · Cited by 1,547
Self-citationHigh-Efficiency Lithium Metal Batteries with Fire-Retardant Electrolytes
Chen, S., Zheng, J., Yu, L., Ren, X., Engelhard, M. H., Niu, C., Lee, H., Xu, W., Xiao, J., Liu, J., et al. (2018) · Joule · doi:10.1016/j.joule.2018.05.002 · Cited by 654
Cited by
Lithium Metal Anodes with Nonaqueous Electrolytes
Zhang, J.-G., Xu, W., Xiao, J., Cao, X., & Liu, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00275 · Cited by 730
Anode‐Free Full Cells: A Pathway to High‐Energy Density Lithium‐Metal Batteries
Nanda, S., Gupta, A., & Manthiram, A. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000804 · Cited by 537
A Review of Solid Electrolyte Interphase (SEI) and Dendrite Formation in Lithium Batteries
Li, B., Chao, Y., Li, M., Xiao, Y., Li, R., Yang, K., Cui, X., Xu, G., Li, L., Yang, C., et al. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-022-00147-5 · Cited by 406
Progress in Solid Polymer Electrolytes for Lithium‐Ion Batteries and Beyond
An, Y., Han, X., Liu, Y., Azhar, A., Na, J., Nanjundan, A. K., Wang, S., Yu, J., & Yamauchi, Y. (2022) · Small · doi:10.1002/smll.202103617 · Cited by 363
Self-citationStrategies to Solve Lithium Battery Thermal Runaway: From Mechanism to Modification
Kong, L., Li, Y., & Feng, W. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-021-00109-3 · Cited by 265
Self-citation
Metadata
- Authors
- Wang, H., Liu, Y., Li, Y., & Cui, Y.
- Venue
- Electrochemical Energy Reviews
- Published
- 2019-10-12
- Volume
- 2
- Issue
- 4
- Pages
- 509-517
- ISSN
- 2520-8136 (ISSN-L)
- 2520-8489
- OpenAlex
- W2979411476
- Cited by
- 217
- References
- 5
- FWCI
- 10.84
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lithium Metal Anode Materials Design: Interphase and Host. https://app.cochat.ai/papers/10.1007/s41918-019-00054-2
- The paper
- Wang, H., Liu, Y., Li, Y., & Cui, Y. (2019). Lithium Metal Anode Materials Design: Interphase and Host. Electrochemical Energy Reviews. https://doi.org/10.1007/s41918-019-00054-2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.