CoChat

The Role of Life Cycle Assessments in Digital Product Passport Implementation for Building a Plastic Circular Economy

Open access
Tabata, Tomohiro, Tsai, Peii · 2025 · Circular Economy and Sustainability

The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index; 3 of the 16 sources its claims cite were checked for support.

Abstract

The digital product passport (DPP) system is expected to support circularity, transparency, and traceability in the circular economy. However, environmental impacts posted on the DPP necessitate a mandatory life cycle assessment (LCA).

Overview

CoChat Summary

TL;DR

The paper argues that environmental impact data in digital product passports (DPPs) require mandatory life cycle assessment (LCA), and that LCA can serve as a digital twin for identifying low-impact plastic circular economy pathways. It reviews EU DPP developments and Japan’s PLA-NETJ project, then outlines LCA system boundaries and plastic-waste quality factors for circular plastics.

Key findings

  • DPPs are expected to store product technical performance, materials and origins, repair activities, recycling capabilities, and life cycle environmental impacts; the EU’s Ecodesign for Sustainable Products Regulation includes the DPP as a new measure from July 18, 2024, with a battery passport legally required in 2027, vehicle passports by 2031, and textiles moving from a minimal system in 2027 to a full circular DPP in 2033.
  • Japan’s plastic waste emissions were approximately 8.5 million tons in 2019, with plastic containers and packaging accounting for 46.8%; among PET bottles and plastic packaging collected by municipalities, only 58.0% and 29.6%, respectively, are recycled as raw materials for products.
  • LCA is needed because material flows satisfying circular economy principles do not necessarily have the least environmental impact; attaching LCA results to material flows can help identify improved flows with reduced impacts and prevent burden-shifting between life cycle stages.
  • Plastic waste quality determines recycling options: high-quality waste can be used for closed-loop or high-value-added open-loop recycling, while low-quality waste must go to low-value-added open-loop recycling, chemical recycling, or thermal recovery.

Methods

  • Perspective/short communication using an online literature survey to characterize the current status of DPPs in the EU and identify DPP-related technical development projects in Japan, including PLA-NETJ and Kobe Plastic Next.
  • Conceptual LCA framework comparing linear and circular economy system boundaries; for simplicity, resources are assumed to circulate only once, after which plastics are incinerated or landfilled, making the circular economy life cycle twice that of the linear economy, and no residue is assumed during processing.
  • Environmental impacts are formulated using material input, process activity, transportation, and the mixing ratio of virgin to recycled resin (α = 0–1.0); the paper presents this as a simple illustrative example and reports no quantitative LCA results in the provided text.

Limitations

  • The paper states further research is required on innovative LCA approaches such as consequential or hybrid LCA, better quantification of circular economy impacts, DPP implementation beyond plastics, intersections with blockchain/IoT/AI, and how DPPs influence consumer behavior.
  • Evident from the text: this is a perspective/short communication with no primary empirical data or reported quantitative LCA outcomes, so the DPP–LCA integration is not empirically validated.
  • Evident from the text: the illustrative LCA relies on simplifying assumptions—single resource circulation, no residue generation, and a circular life cycle defined as twice the linear life cycle—which limit realism and generalizability.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1007/s43615-025-00552-0

Cites

13 of 13 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Fig. 1 Community collection point in Kobe City (photographed by the author). Note: ( a ) Plastic recycling boxes for bottles (three boxes), colored trays, white trays, and transparent containers. ( b ) Image of the plastic pre-processing and recycling process of the collected plastics from the resource boxes to be reborn as new products. For example, plastic bottles are recycled into new plastic bottles and plastic bottle caps are recycled into rulers
Fig. 1 Community collection point in Kobe City (photographed by the author). Note: ( a ) Plastic recycling boxes for bottles (three boxes), colored trays, white trays, and transparent containers. ( b ) Image of the plastic pre-processing and recycling process of the collected plastics from the resource boxes to be reborn as new products. For example, plastic bottles are recycled into new plastic bottles and plastic bottle caps are recycled into rulersFrom the PDF
Image 2
From the PDF
Fig. 3 Combination of technologies and methods applied in each of the processes of the plastic circular economy. Note: In the upper part of the diagram, the differences in the technology and methods used in each process or the patterns of technology combinations are expressed as A, B, and C for each process. The environmental impact differs depending on the combination of technologies and methods used. If the life cycle is formed by following the blue line, the environmental impact is represented as Pattern A in the graph at the bottom of the figure. Similarly, the results for the red (Pattern B) and green (Pattern C) lines are also shown. Measuring the environmental impact of each pattern helps identify the pattern with the lowest environmental impact
Fig. 3 Combination of technologies and methods applied in each of the processes of the plastic circular economy. Note: In the upper part of the diagram, the differences in the technology and methods used in each process or the patterns of technology combinations are expressed as A, B, and C for each process. The environmental impact differs depending on the combination of technologies and methods used. If the life cycle is formed by following the blue line, the environmental impact is represented as Pattern A in the graph at the bottom of the figure. Similarly, the results for the red (Pattern B) and green (Pattern C) lines are also shown. Measuring the environmental impact of each pattern helps identify the pattern with the lowest environmental impactFrom the PDF

Verification

Claims the paper makes

3 Valid · 3 Not valid · 12 Not checked · 32 Own results and interpretations

7 more claims

Create a free account to see all 50 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 34
  • It may state two separate claims as one. 17

Create a free account to see these claims.

Citations

Cites

Show all 13 references

Research works printed but not linked: 1

  1. NEC Corporation (2024) Development of a prototype for a plastic information distribution platform. https://jpn.nec.com/press/202402/20240227_01.html. Accessed 2 Mar 2025

Cited by

See all 17

Metadata

Authors
Tabata, T., & Tsai, P.
Affiliations
  • Kobe University (JP)
  • Kyushu Institute of Technology (JP)
Corresponding author
Tabata, Tomohiro
Venue
Circular Economy and Sustainability
Published
2025-04-02
Volume
5
Issue
4
Pages
3145-3157
ISSN
  • 2730-597X (ISSN-L)
  • 2730-5988
OpenAlex
W4409164749
Cited by
17
References
13
Citations by year
2026: 14 · 2025: 3
FWCI
4.68
Type
journal article
Language
en
Open access
Licence
Locations
  • Circular Economy and Sustainability (publishedVersion, cc-by)
  • Institutional Repositories DataBase (IRDB) (publishedVersion, cc-by)
  • Institutional Repositories DataBase (IRDB) (submittedVersion, cc-by)
  • Kobe University Repository Kernel (Kobe University) (submittedVersion, other-oa)
Funders
Kobe University
Topics
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
  • Social Sciences › Business, Management and Accounting › Strategy and Management › Sustainable Supply Chain Management
  • Physical Sciences › Engineering › Building and Construction › Sustainable Design and Development
Keywords
digital product passport, life cycle assessment, plastic waste, environmental impact assessment, product traceability, resource recovery, plastic recycling, environmental labelling, European Union regulation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: The Role of Life Cycle Assessments in Digital Product Passport Implementation for Building a Plastic Circular Economy. https://app.cochat.ai/papers/10.1007/s43615-025-00552-0
The paper
Tabata, T., & Tsai, P. (2025). The Role of Life Cycle Assessments in Digital Product Passport Implementation for Building a Plastic Circular Economy. Circular Economy and Sustainability. https://doi.org/10.1007/s43615-025-00552-0

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.