Thermal contact conductance

Conduction of Heat in Solids

Carslaw, H. S., & Jaeger, J. C. (1947) · International Linear Collider · Cited by 19,877

Conduction of heat in solids

Tranter, C. J. (1959) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(59)90029-8 · Cited by 18,518

Contact of nominally flat surfaces

Greenwood, J. A., & Williamson, J. B. P. (1966) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1966.0242 · Cited by 6,150

An Introduction to Statistical Communication Theory

Middleton, D. (2009) · Institute of Electrical and Electronics Engineers eBooks · doi:10.1109/9780470544112.part1 · Cited by 1,127

Contact of nominally flat surfaces

(1967) · Wear · doi:10.1016/0043-1648(67)90287-6 · Cited by 864

An introduction to statistical communication theory

Siebert, W. M. (1961) · Journal of the Franklin Institute · doi:10.1016/0016-0032(61)90153-3 · Cited by 703

Constriction resistance and the real area of contact

Greenwood, J. A. (1966) · British Journal of Applied Physics · doi:10.1088/0508-3443/17/12/310 · Cited by 630

Thermal Contact Resistance in a Vacuum Environment

Clausing, A. M., & Chao, B. T. (1965) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3689082 · Cited by 248

Thermal contact resistance

Mikic, B. B., & Rohsenow, W. M. (1966) · Cited by 205

Prediction of Thermal Conductance of Metallic Surfaces in Contact

Fenech, H., & Rohsenow, W. M. (1963) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3686003 · Cited by 147

Effects of lubricant on the IHTC during the hot stamping of AA6082 aluminium alloy: Experimental and modelling studies

Liu, X., Fakir, O. E., Meng, L., Sun, X., Li, X., & Wang, L. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.12.013 · Cited by 24

Thermal conductance of pressed copper contacts at liquid helium temperatures

Salerno, L. J., Kittel, P., & Spivak, A. L. (1984) · AIAA Journal · doi:10.2514/3.8856 · Cited by 24

An asymptotic solution for short-time transient heat conduction between two similar contacting bodies

Barber, J. R. (1989) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(89)90243-3 · Cited by 24

Thermal Contact Resistance

Wiśniewski, T., & Furmański, P. (2014) · Springer eBooks · doi:10.1007/978-94-007-2739-7_901 · Cited by 24

Modeling thermal contact resistance at the finger-object interface

Rykaczewski, K. (2018) · Temperature · doi:10.1080/23328940.2018.1551706 · Cited by 23

Numerical prediction of high temperature thermal contact resistance of HTA–C/ZrB2-SiC with radiation effects

Chen, M., Li, Q., & Zhang, P. (2020) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2020.105058 · Cited by 23

Rough contact surface reconstruction based on A mechanical-thermal contact model

Ta, W., Zhao, H., Zhang, X., Gao, Y., & Zhou, Y. (2022) · Tribology International · doi:10.1016/j.triboint.2022.107977 · Cited by 23

Experimental study of contacting surfaces microgeometry and gas gap impact on thermal contact conductance of metallic joints

Wiśniewski, T. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123511 · Cited by 23

A new approach in evaluation of thermal contact conductance of tube–fin heat exchanger

Tang, D., Li, D., Peng, Y., & Du, Z. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.05.001 · Cited by 23

Thermal Spreading Resistance of Arbitrary-Shape Heat Sources on a Half-Space: A Unified Approach

Sadeghi, E., Bahrami, M., & Djilali, N. (2010) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2010.2043843 · Cited by 23

Realizing the nanoscale quantitative thermal mapping of scanning thermal microscopy by resilient tip–surface contact resistance models

Li, Y., Mehra, N., Ji, T., & Zhu, J. (2018) · Nanoscale Horizons · doi:10.1039/c8nh00043c · Cited by 23

Effect of tool coatings on the interfacial heat transfer coefficient in hot stamping of aluminium alloys under variable contact pressure conditions

Liu, X., Fakir, O. E., Zheng, Y., Gharbi, M. M., & Wang, L. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.03.087 · Cited by 23

The study on failure mechanisms of bond pad metal peeling: Part B––Numerical analysis

Jeon, I. (2003) · Microelectronics Reliability · doi:10.1016/s0026-2714(03)00213-0 · Cited by 23

Thermal Contact Conductance for Aluminum and Stainless-Steel Contacts

Marotta, E., & Fletcher, L. S. (1998) · Journal of Thermophysics and Heat Transfer · doi:10.2514/2.6348 · Cited by 23

Thermoelastic instability in planar solidification

Li, N.-Y., & Barber, J. R. (1991) · International Journal of Mechanical Sciences · doi:10.1016/0020-7403(91)90051-4 · Cited by 23

Dead time compensation in a vector-controlled induction machine

Kim, S., Park, T. S., Yoo, J., Park, G. T., & Kim, N. J. (2002) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.1998.703127 · Cited by 23

Thermal contact conductance between balls and bearing rings

Liu, J., Ma, C., & Wang, S. (2020) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2020.104780 · Cited by 22

Heat transfer in a multi-layered semiconductor device with spatially-varying thermal contact resistance between layers

Krishnan, G., & Jain, A. (2022) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2022.106482 · Cited by 22

Overall heat transfer coefficient with considering thermal contact resistance in thermal recovery wells

Wang, L., Liu, H., Pang, Z., & Lv, X. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.07.050 · Cited by 22

A multiscale model for thermal contact conductance of rough surfaces under low applied pressure

Panagouli, O. K., Margaronis, K., & Tsotoulidou, V. (2020) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2020.05.006 · Cited by 22

Theoretical and Experimental Study of a Thermal Contact Conductance Model for Elastic, Elastoplastic and Plastic Deformation of Rough Surfaces

Jeng, Y., Chen, J.-T., & Cheng, C.-Y. (2003) · Tribology Letters · doi:10.1023/a:1022632801251 · Cited by 22

Thermal Conductance of Delamination Cracks in a Fiber‐Reinforced Ceramic Composite

McDonald, K. R., Dryden, J. R., Majumdar, A., & Zok, F. W. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01233.x · Cited by 22

Thermal Contact Resistance Modeling of Non-Flat, Roughened Surfaces With Non-Metallic Coatings

Marotta, E., Fletcher, L. S., & Dietz, T. A. (2000) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.1338135 · Cited by 22

Understanding Nanoscale Plasticity by Quantitative In Situ Conductive Nanoindentation

George, J., Mannepalli, S., & Kiran, M. S. R. N. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202001494 · Cited by 21

Theoretical analysis of phase change heat transfer and energy storage in a spherical phase change material with encapsulation

Jain, A., & Parhizi, M. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.122348 · Cited by 21

Investigation on the Temperature Control Accuracy of a Print Head for Extrusion 3D Printing and Its Improved Design

Zhang, P., Gao, Q., Yu, K., Yao, Y., & Lu, L. (2022) · Biomedicines · doi:10.3390/biomedicines10061233 · Cited by 21

Fractal model of thermal contact conductance considering thermal stress and asperity interactions

Cheng, Y., Wan, Z., Feng, X., & Long, Y. (2024) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2024.125787 · Cited by 21

Numerical simulations to determine the influence of mould design on ice-templated scaffold structures

Husmann, A., Pawelec, K. M., Burdett, C. L., Best, S. M., & Cameron, R. E. (2015) · Journal of Biomedical Engineering and Informatics · doi:10.5430/jbei.v1n1p47 · Cited by 21

Transient contact heat transfer measurements based on high-speed IR-thermography

Burghold, E. M., Frekers, Y., & Kneer, R. (2017) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.01.019 · Cited by 21

Thermal conductivity of porous aggregates

Arakawa, S., Tanaka, H., Kataoka, A., & Nakamoto, T. (2017) · Astronomy and Astrophysics · doi:10.1051/0004-6361/201732182 · Cited by 21

A New Method for Determining the Connection Resistance of the Compression Connector in Cable Joint

Yang, F., Zhu, N., Liu, G., Ma, H., Wei, X., Hu, C., Wang, Z., & Huang, J. (2018) · Energies · doi:10.3390/en11071667 · Cited by 21

A boundary element procedure to analyze the thermomechanical contact problem in 3D microelectronic packaging

Vallepuga-Espinosa, J., Ubero-Martínez, I., Rodríguez‐Tembleque, L., & Cifuentes-Rodríguez, J. (2020) · Engineering Analysis with Boundary Elements · doi:10.1016/j.enganabound.2020.02.011 · Cited by 21

Representative contact element size determination for micromechanical contact analysis of self-affine topographies

Carneiro, A. M. C., Carvalho, R. P., & Pires, F. M. A. (2020) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2020.09.006 · Cited by 21

Comparison and validation of thermal contact resistance models at solid–liquid interface taking into account the wettability parameters

Somé, S. C., Delaunay, D., & Gaudefroy, V. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.08.032 · Cited by 21

Analysis and Prediction of Constriction Resistance for Contact Between Rough Engineering Surfaces

Black, A. F., Singhal, V., & Garimella, S. V. (2004) · Journal of Thermophysics and Heat Transfer · doi:10.2514/1.9119 · Cited by 21

Thermal Periodic Contact of Exhaust Valves

Paradis, I., Wagner, J. R., & Marotta, E. (2002) · Journal of Thermophysics and Heat Transfer · doi:10.2514/2.6712 · Cited by 21

RANDOM-PROCESS ANALYSIS OF THE EFFECT OF WAVINESS ON THERMAL CONTACT RESISTANCE

THOMAS, T. R., & Sayles, R. S. (1974) · AIAA/ASME Joint Thermophysics and Heat Transfer Conference · doi:10.2514/6.1974-691 · Cited by 21

Advances in thermal contact resistance studies

Murwamadala, R. D., & Veeredhi, V. R. (2022) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062221115297 · Cited by 23

A comparative study of thermal contact conductance for similar and dissimilar contact pairs using thermocouple and infrared thermography under vacuum and gaseous medium

Khan, K. A., Tarique, A. H., Chand, A., & Tariq, A. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.125157 · Cited by 20

A New Method for Measuring Thermal Contact Conductance—Experimental Technique and Results

Woodland, S., Crocombe, A. D., Chew, J. W., & Mills, S. J. (2011) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4001770 · Cited by 20

Experimental Characterization and Modeling of Thermal Contact Resistance of Electric Machine Stator-to-Cooling Jacket Interface Under Interference Fit Loading

Cousineau, E., Bennion, K., Chieduko, V., Lall, R., & Gilbert, A. T. (2018) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4039459 · Cited by 20

Thermal conductivity and coordination number of compressed dust aggregates

Arakawa, S., Tatsuuma, M., Sakatani, N., & Nakamoto, T. (2019) · Icarus · doi:10.1016/j.icarus.2019.01.022 · Cited by 20

Influence of Aluminum Laser Ablation on Interfacial Thermal Transfer and Joint Quality of Laser Welded Aluminum–Polyamide Assemblies

Al-Sayyad, A., Bardon, J., Hirchenhahn, P., Vaudemont, R., Houssiau, L., & Plapper, P. (2019) · Coatings · doi:10.3390/coatings9110768 · Cited by 20

Interfacial Heat Transfer Coefficient in Unidirectional Permanent Mold Casting: Modeling and Inverse Estimation

STIEVEN, G. D. M., Soares, D., Oliveira, E. P., & Lins, E. F. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120765 · Cited by 20

A simple setup to test thermal contact resistance between interfaces of two contacted solid materials

Liu, J., Han, F., Luo, X., Hu, R., & Liu, S. (2010) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept.2010.5582472 · Cited by 20

Thermal resistance of two solids in contact through a cylindrical joint

Tio, K.-K., & Chuan, T. K. (1998) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(97)00259-7 · Cited by 20

Thermal modelling of an HSC machining centre to predict thermal error of the feed system

Uhlmann, E., & Hu, J. (2012) · Production Engineering · doi:10.1007/s11740-012-0406-6 · Cited by 20

Numerical modeling of the thermal contact in metal forming processes

Martins, J. M. P., Neto, D. M., Alves, J. L., Oliveira, M. C., & Menezes, L. F. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-8571-y · Cited by 20

Rapid Cellulose-Mediated Microwave Sintering for High-Conductivity Ag Patterns on Paper

Jung, S., Chun, S. J., & Shon, C.-H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06535 · Cited by 20

Thermal resistance of pressed contacts of aluminum and niobium at liquid helium temperatures

Dhuley, R. C., Geelhoed, M., & Thangaraj, J. C. T. (2018) · Cryogenics · doi:10.1016/j.cryogenics.2018.06.003 · Cited by 20

Finite Element Analysis of Thermoelastic Contact Stability

Yeo, T., & Barber, J. R. (1994) · Journal of Applied Mechanics · doi:10.1115/1.2901578 · Cited by 20

On the thermal analysis of pressure tube/calandria tube contact in CANDU reactors

Shoukri, M., & Chan, A. M. C. (1987) · Nuclear Engineering and Design · doi:10.1016/0029-5493(87)90299-8 · Cited by 20

Constriction resistance of circular contacts on coated surfaces - Effect of boundary conditions

Negus, K. J., Yovanovich, M. M., & Thompson, J. C. (1988) · Journal of Thermophysics and Heat Transfer · doi:10.2514/3.80 · Cited by 20

NONUNIQUENESS AND STABILITY FOR HEAT CONDUCTION THROUGH A DUPLEX HEAT EXCHANGER TUBE

Barber, J. R. (1986) · Journal of Thermal Stresses · doi:10.1080/01495738608961888 · Cited by 20

Experimental study on the formation of TCR and thermal behavior of hard machining using TiAlN coated tools

Hao, G., & Liu, Z. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.05.108 · Cited by 19

A review of the development of nuclear fuel performance analysis and codes for PWRs

Ding, M., Zhou, X., Zhang, H., Bian, H., & Yan, Q. (2021) · Annals of Nuclear Energy · doi:10.1016/j.anucene.2021.108542 · Cited by 19

Estimation of thermal contact conductance of spacecraft heat sink bolted joints

Ajul, E., & Chanda, S. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120078 · Cited by 19

An analytical model for wearable thermoelectric generators harvesting body heat: An opportunistic approach

Zhang, A., Pang, D., Lou, J., Wang, J., & Huang, W. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121658 · Cited by 19

Coupled heat conduction and multiphase change problem accounting for thermal contact resistance

Daniel Weisz-patrault, A. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.08.091 · Cited by 19

Effects of contact-nature on transient thermal contact conductance

Kumar, S., & Tariq, A. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2018.11.029 · Cited by 19

An effective thermal conductivity model for architected phase change material enhancer: Theoretical and experimental investigations

Hubert, R., Matar, O. B., Foncin, J., Coquet, P., Tan, D., Li, H., Teo, E. H. T., Merlet, T., & Pernod, P. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121364 · Cited by 19

A scaling law for heat conductivity in sheared granular materials

Rognon, P., Einav, I., Bonivin, J., & Miller, T. P. (2010) · Europhysics Letters (EPL) · doi:10.1209/0295-5075/89/58006 · Cited by 19

Stability of thermoelastic contact for a rectangular elastic block sliding against a rigid wall

Ciavarella, M., & Barber, J. R. (2005) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2004.10.008 · Cited by 19

On relations between geometries of microcontact clusters and their overall properties

Argatov, I., & Sevostianov, I. (2009) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2009.06.001 · Cited by 19

A Contact Formulation for Electrical and Mechanical Resistance

Zavarise, G., Boso, D. P., & Schrefler, B. A. (2002) · Solid mechanics and its applications · doi:10.1007/978-94-017-1154-8_22 · Cited by 19

Designing guidelines for possible continuous-wave-operating nitride vertical-cavity surface-emitting lasers

Mackowiak, P., & Nakwaski, W. (2000) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/33/6/309 · Cited by 19

A Scale Analysis Approach to Thermal Contact Resistance

Bahrami, M., Culham, J. R., & Yovanovich, M. M. (2003) · doi:10.1115/imece2003-55283 · Cited by 19

Thermal conductance in a bolted joint

ROCA, R., & Mikic, B. B. (1972) · AIAA Thermophysics Conference · doi:10.2514/6.1972-282 · Cited by 19

Modeling of Thermal Joint Resistance for Sphere-Flat Contacts in a Vacuum

Bahrami, M. (2004) · UWSpace (University of Waterloo) · Cited by 19

Thermal Modeling of an Intermediate Pressure Steam Turbine by Means of Conjugate Heat Transfer—Simulation and Validation

Born, D., Stein, P., MARINESCU, G. C., Koch, S. W., & Schumacher, D. (2016) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4034513 · Cited by 18

Modelling of Lubricated Electrical Contacts

Jackson, R. L., & Angadi, S. V. (2022) · Lubricants · doi:10.3390/lubricants10030032 · Cited by 18

Thermal influence analysis of coatings and contact resistance in turning cutting tool using COMSOL

Ribeiro, C. A. C., Ferreira, J. R., & Silva, S. M. M. D. L. E. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07835-4 · Cited by 18

Oscillating Gadolinium Thermal Diode Using Temperature‐Dependent Magnetic Forces

Zhu, Q., Zdrojewski, K., Castelli, L., & Wehmeyer, G. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202206733 · Cited by 19

Electrical Contact During a Rolling Vibratory Motion Considering Mixed Lubrication

Jackson, R. L., & Angadi, S. V. (2023) · Journal of Tribology · doi:10.1115/1.4062295 · Cited by 18

The mechanical-thermal-electrical contact behaviors between rough surfaces under cyclic loading

Zhao, H., Ta, W., & Zhou, Y. (2023) · Acta Mechanica Sinica · doi:10.1007/s10409-023-23212-x · Cited by 18

Modeling Heat Loss during Self-Heating Composting Based on Combined Fluid Film Theory and Boundary Layer Concepts

Mudhoo, A. (2008) · Journal of Environmental Informatics · doi:10.3808/jei.200800113 · Cited by 18

Thermal-Induced Wear Mechanisms of Sheet Nacre in Dry Friction

Stempflé, P., Djilali, T., Njiwa, R. K., Marthe Rousseau, A., Lopez, É., & Xavier Bourrat, D. (2009) · Tribology Letters · doi:10.1007/s11249-009-9436-4 · Cited by 18

A coupled chemo-mechanical model to study the effects of adhesive strength on the electrochemical performance of silicon electrodes for advanced lithium ion batteries

Appiah, W. A., Park, J., Byun, S., Cho, I., Mozer, A. J., Ryou, M., & Lee, Y. M. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.06.079 · Cited by 18

Reconstruction of the heat transfer coefficient at the interface of a bi-material

Zhuo, L., Lesnic, D., & Meng, S. (2019) · Inverse Problems in Science and Engineering · doi:10.1080/17415977.2019.1574781 · Cited by 18

Performance evaluation of non-uniform illumination on a transverse bifacial PVT receiver in combination with a CPC geometry

Cabral, D., Gomes, J., & Karlsson, B. (2019) · Solar Energy · doi:10.1016/j.solener.2019.10.069 · Cited by 18

The transient divided bar method for laboratory measurements of thermal properties

Bording, T. S., Nielsen, S. B., & Balling, N. (2016) · Geophysical Journal International · doi:10.1093/gji/ggw278 · Cited by 18

Investigation of the interfacial heat transfer coefficient of sheet aluminum alloy 5083 in warm stamping process

Zhao, K., Ren, D., Wang, B., & Chang, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.11.158 · Cited by 18

Least Squares Fourier Series Solutions to Boundary Value Problems

Kelman, R. B. (1979) · SIAM Review · doi:10.1137/1021051 · Cited by 18

Thermal performance analysis for hot-wall condenser and evaporator configurations in refrigeration appliances

Rebora, A. U., & Tagliafico, L. A. (1998) · International Journal of Refrigeration · doi:10.1016/s0140-7007(97)00077-7 · Cited by 18

The thermoelastic Aldo contact model with frictional heating

Afferrante, L. (2003) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(03)00116-9 · Cited by 18

Conduction Heat Transfer in Electronic Equipment

Remsburg, R. (1998) · Springer eBooks · doi:10.1007/978-1-4419-8509-5_2 · Cited by 18

Cylindrical thermal contact conductance

Ayers, G. H. (2004) · OakTrust (Texas A&M University Libraries) · Cited by 18

Thermal design, analysis and test: Framework for CubeSat in low Earth orbit

Narimane, B., & Bah, A. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.103401 · Cited by 17

Indirect conduction in gas–solids systems: Static vs. Dynamic effects

Lattanzi, A. M., & Hrenya, C. M. (2017) · AIChE Journal · doi:10.1002/aic.15802 · Cited by 17

Contact Modeling in the Discrete Element Method

Rojek, J. (2018) · Courses and lectures · doi:10.1007/978-3-319-90155-8_4 · Cited by 17

Fractal model of thermal contact conductance of two spherical joint surfaces considering friction coefficient

Sun, X., Meng, C., & Duan, T. (2021) · Industrial Lubrication and Tribology · doi:10.1108/ilt-09-2021-0354 · Cited by 17

Thermo-visco-hyperelastic behavior of polycarbonate in forming of a complex geometry

Takaffoli, M., Hangalur, G., Bakker, R., & Chandrashekar, N. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.06.019 · Cited by 17

Metal and dielectric contact heat transfer and enhancement study using finite element approach

Siddappa, P. G., & Tariq, A. (2020) · Heat and Mass Transfer · doi:10.1007/s00231-020-02910-0 · Cited by 17

Transient non-intrusive method for estimating spatial thermal contact conductance by means of the reciprocity functional approach and the method of fundamental solutions

Colaço, M. J., Alves, C. J. S., & Orlande, H. R. B. (2014) · Inverse Problems in Science and Engineering · doi:10.1080/17415977.2014.933830 · Cited by 17

Role of Thermal Contact Conductance on Sandwich-Type Metallic Thermal Protection System Profile

Kumar, R. R., Palininathan, R., Kishor, E., Kumar, G. S., & Deependran, B. (2012) · AIAA Journal · doi:10.2514/1.j051544 · Cited by 17

Interaction of metal dust adhered on castellated substrates with the ELMy H-mode plasmas of ASDEX-Upgrade

Ratynskaia, S., Tolias, P. B., Angeli, M. D., Rohde, V., Herrmann, A., Ripamonti, D., Riva, G., Thorén, E., Vignitchouk, L., Sieglin, B., et al. (2018) · Nuclear Fusion · doi:10.1088/1741-4326/aad471 · Cited by 17

Prediction of Thermal Contact Conductance in Vacuum Using Monte Carlo Simulation

Kumar, S. S., & Ramamurthi, K. (2001) · Journal of Thermophysics and Heat Transfer · doi:10.2514/2.6592 · Cited by 17

Physics-informed hybrid digital twin framework integrating fractal contact modeling and edge-cloud artificial intelligence for dynamic thermal contact conductance prediction

Liu, J., Ma, C., Li, M., He, J., Hua, C., Wang, L., Yang, J., Liu, K., & Zhou, Y. (2026) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2026.128736 · Cited by 16

Effect of the secondary microcontact state induced by the all-factor thermal effect on bidirectional thermal contact performance

Wang, C., Lin, Q., Pan, Z., Hong, J., & Zhou, Y. (2023) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2023.106646 · Cited by 16

Precision injection moulding of micro components: Determination of heat transfer coefficient and precision process simulation

Su, Q., Zhang, N., & Gilchrist, M. D. (2024) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2024.109065 · Cited by 16

An elasto-plastic model of thermal contact conductance between nominally flat surfaces in vacuum

Buonanno, G., Giovinco, G., & Massarotti, N. (2003) · International Communications in Heat and Mass Transfer · doi:10.1016/s0735-1933(03)00151-9 · Cited by 4

Prediction of thermal contact conductance based on the statistics of the roughness profile characteristics

Zhao, J., Wang, A., & Yang, C. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.07.021 · Cited by 36

Simplified method for calculating thermal conductance of rough, nominally flat surfaces in high vacuum

Mc Kinzie, D. J., Jr. (1970) · NASA Technical Reports Server (NASA) · Cited by 1

Prediction of Thermal Contact Conductance in Vacuum by Statistical Mechanics

Leung, M. K. H., Hsieh, C. K., & Goswami, D. Y. (1998) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.2830064 · Cited by 37

An experimentally validated thermo-mechanical model for the prediction of thermal contact conductance

Singhal, V., Litke, P. J., Black, A. F., & Garimella, S. V. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2005.06.028 · Cited by 108