Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 173

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Adaptive networks for fault diagnosis and process control

Open access
Ungar, L.H., Powell, B.A., Kamens, S.N.·1990·Computers & Chemical Engineering

Abstract

The use of adaptive (artificial neural) networks for fault diagnosis and process control is explored. Adaptive networks can be used as fault recognition systems, as adaptive nonlinear process models, and as controllers. Connection strengths representing correlations between inputs (alarms and sensor measurements) and outputs (faults, future sensor measurements or control actions) are learned using the LMS (Widrow-Hoff) rule and the backpropagation algorithm. The resulting system is a pattern recognizer which is able to learn nonlinear and logical relationships as well as linear correlations. Results are presented for two problems: diagnosing failures in a small model chemical plant, and controlling a highly nonlinear bioreactor. For the diagnosis problem, learning in adaptive networks given qualitative (alarm) and quantitative (sensor) data are compared, and the effect of noise is studied. The importance of nonlinear networks is demonstrated using simple problems which require context sensitivity and problems where optimal alarm thresholds are learned. Results using an adaptive model-based controller using two neural networks (one for the model and one for the controller) are presented and extensions to the standard layered feedforward network are suggested which greatly increase the utility of neural networks for process control. Adaptive networks provide pattern recognition facilities which can be used and interpreted in several ways: they perform multiple nonlinear regression on input/output pairs (current sensor readings and alarms are associated with faults, future readings or control actions) that may be both quantitative and qualitative. Although adaptive networks have many similarities with well-established statistical techniques for system identification, they still offer promise of major benefit, primarily in suggesting new equations, architectures and algorithms. Although the adaptive networks can be viewed as a special form of nonlinear regression, the network formalism suggests several powerful nonlinear functional forms to use. Use of highly interconnected nonlinear systems allows unexpected interactions to be captured. Recurrent networks can learn to recognize arbitrary delays. Temporal difference methods can speed learning when feedback is not immediate. Artificial neural networks will not in any way replace control algorithms, but rather are good for learning that which we are ignorant of: alarm thresholds, patterns of disturbances and model-mismatch (including process delays). Adaptive networks can be thought of as a very data-intensive approach to system identification: many parameters are used in a format that allows interactions between all of the variables. Thus more specific patterns can be learned than when the system is described using a relatively simple equation with a small number of parameters. When the exact form of the equation is known or little data is available, an equation with fewer parameters is of course preferable and neural networks should be avoided. We looked at two example problems: fault diagnosis and adaptive model-based control. Both quantitative (sensor) and qualitative (alarm) information can be used in fault diagnosis. Optimal thresholds for triggering alarms are learned; These can be dependent on the context provided by the states of other variables. Nonlinear networks are required for all but the simplest problems. In adaptive model-based control, a highly nonlinear model was learned without using a priori knowledge of the equational forms. This approach is expected to yield the most benefit in MIMO systems which contain complex nonlinear interactions and in systems in which recurring disturbances must be recognized and forecast.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/0098-1354(90)87027-m

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 4 references

Cited by

See all 173

Metadata

Authors
Ungar, L. H., Powell, B. A., & Kamens, S. N.
Venue
Computers & Chemical Engineering
Publisher
Elsevier BV
Published
1990-05
Volume
14
Issue
4-5
Pages
561-572
ISSN
0098-1354 (ISSN-L)
OpenAlex
W2001548922
Cited by
173
References
4
FWCI
30.08
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Adaptive networks for fault diagnosis and process control. https://app.cochat.ai/papers/10.1016/0098-1354(90)87027-m
The paper
Ungar, L. H., Powell, B. A., & Kamens, S. N. (1990). Adaptive networks for fault diagnosis and process control. Computers & Chemical Engineering. https://doi.org/10.1016/0098-1354(90)87027-m

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.