Thermal degradation of polyethylene mixed with poly(vinyl chloride) and poly(ethyleneterephthalate)
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
Waste polyvinyl chloride generally results in lower oil yields and fuel quality because it releases corrosive hydrogen chloride gas.
“while PVC releases corrosive hydrogen chloride gas, both of which diminish the yield and heating value of the desired hydrocarbon oil fraction [335-337].”
From Biofuels, E-Fuels, and Waste-Derived Fuels: Advances, Challenges, and Future Directions (2025) · cites this paper as [336]
Waste polyethylene terephthalate generally results in lower oil yields and fuel quality because its oxygen content leads to formation of oxygenated compounds and higher char.
“Waste polyethylene terephthalate (PET) and polyvinyl chloride (PVC) generally result in lower oil yields and fuel quality due to their inherent chemical structures: PET's oxygen content leads to the formation of oxygenated compounds and higher char, while PVC releases corrosive hydrogen chloride gas, both of which diminish the yield and heating value of the desired hydrocarbon oil fraction [335-”
From Biofuels, E-Fuels, and Waste-Derived Fuels: Advances, Challenges, and Future Directions (2025) · cites this paper as [336]
Cited by
Sorted by citations
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616 · see citing works
Biofuels, E-Fuels, and Waste-Derived Fuels: Advances, Challenges, and Future Directions
Yılbaşı, Z. (2025) · Sustainability · doi:10.3390/su17136145 · Cited by 41 · see citing works
- Authors
- Sakata, Y., Uddin, M. A., Koizumi, K., & Murata, K.
- Affiliations
- Okayama University (JP)
- Mitsui Engineering and Shipbuilding (Japan) (JP)
- Corresponding author
- Sakata, Y.
- ORCID
- Sakata, Y.
- Venue
- Polymer Degradation and Stability
- Publisher
- Elsevier BV
- Published
- 1996-01
- Volume
- 53
- Issue
- 1
- Pages
- 111-117
- ISSN
- 0141-3910 (ISSN-L)
- OpenAlex
- W2168878309
- Cited by
- 88
- References
- 0
- Citations by year
- 2026: 4 · 2025: 3 · 2024: 2 · 2023: 4 · 2022: 4 · 2021: 4 · 2020: 1 · 2019: 3 · 2018: 1 · 2017: 3 · 2016: 4 · 2015: 3 · 2013: 2
- FWCI
- 4.93
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Polymer Degradation and Stability (publishedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Thermochemical Biomass Conversion Processes
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and PVC
- Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
- Keywords
- thermal degradation, polyethylene, polyvinyl chloride, polyethylene terephthalate, polymer blends, low molecular weight hydrocarbons, plastic recycling, pyrolysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
