Potential of natural fiber/biomass filler-reinforced polymer composites in aerospace applications
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
At temperatures below 140 °C, the small change of conversion in soda black liquor solids is attributed to moisture vaporization from the sample surface.
“It can be seen from the Fig. 2b at a temperature lower than 140 °C, a small change of conversion in the soda black liquor solids sample was attributed to moisture vaporization, which was attached on the surface of the sample [26].”
From Application of weibull mixture model to illustrate wheat straw black liquor pyrolysis kinetics (2020) · cites this paper as [26]
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · see citing works
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H., & Sain, M. M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,299 · see citing works
Recent advances in graphene based polymer composites
Kuilla, T., Bhadra, S., Yao, D., Kim, N. H., Bose, S., & Lee, J. H. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.07.005 · Cited by 3,420 · see citing works
Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review
Li, X., Tabil, L. G., & Panigrahi, S. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0042-3 · Cited by 2,924 · see citing works
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453 · see citing works
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H. S., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,310 · see citing works
Silane coupling agents used for natural fiber/polymer composites: A review
Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.005 · Cited by 2,258 · see citing works
Mohanty, A. K., Misra, M., & Drzal, L. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021013921916 · Cited by 2,175 · see citing works
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
Kabir, M. M., Wang, H., Lau, K.-T., et al. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,847 · see citing works
Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review
Bakis, C. E., Bank, L. C., Brown, V. L., Cosenza, E., Davalos, J. F., Lesko, J. J., Machida, A., Rizkalla, S. H., & Triantafillou, T. (2002) · Journal of Composites for Construction · doi:10.1061/(asce)1090-0268(2002)6:2(73 · Cited by 1,813 · see citing works
Natural Fibers, Biopolymers, and Biocomposites
Mohanty, A. K. (2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,655 · see citing works
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
Jawaid, M., & Khalil, H. P. S. A. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.043 · Cited by 1,562 · see citing works
Self-citationFibre reinforced composites in aircraft construction
Soutis, C. (2005) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2005.02.004 · Cited by 1,318 · see citing works
Big returns from small fibers: A review of polymer/carbon nanotube composites
Breuer, O., & Sundararaj, U. (2004) · Polymer Composites · doi:10.1002/pc.20058 · Cited by 1,246 · see citing works
Progress Report on Natural Fiber Reinforced Composites
Faruk, O., Bledzki, A. K., Fink, H., & Sain, M. M. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300008 · Cited by 1,002 · see citing works
Recent advances in shape memory polymers and composites: a review
Ratna, D., & Karger-Kocsis, J. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2176-7 · Cited by 942 · see citing works
AL-Oqla, F. M., & Sapuan, S. M. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.10.050 · Cited by 784 · see citing works
A Review on Potentiality of Nano Filler/Natural Fiber Filled Polymer Hybrid Composites
Saba, N., Tahir, P. M., & Jawaid, M. (2014) · Polymers · doi:10.3390/polym6082247 · Cited by 744 · see citing works
Self-citationMechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites
John, M. J., Thomas, S., & Varughese, K. T. (2004) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00261-6 · Cited by 711 · see citing works
Ecodesign of automotive components making use of natural jute fiber composites
Alves, C., Ferrão, P., Silva, A., et al. (2009) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.10.022 · Cited by 648 · see citing works
Impact and tensile properties of PLA/Cordenka and PLA/flax composites
Bax, B., & Müssig, J. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.01.004 · Cited by 637 · see citing works
A Review on Pineapple Leaves Fibre and Its Composites
Asim, M., Abdan, K., Jawaid, M., Nasir, M., Dashtizadeh, Z., Ishak, M. R., & Hoque, M. E. (2015) · International Journal of Polymer Science · doi:10.1155/2015/950567 · Cited by 637 · see citing works
Self-citationGraupner, N., Herrmann, A. S., & Müssig, J. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.003 · Cited by 608 · see citing works
Utilization of oil palm as a source of renewable energy in Malaysia
Sethupathi, S., Chai, S., & Mohamed, A. R. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.06.006 · Cited by 592 · see citing works
Oil palm fiber (OPF) and its composites: A review
Shinoj, S., Visvanathan, R., Panigrahi, S., et al. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.09.009 · Cited by 525 · see citing works
A self-healing carbon fibre reinforced polymer for aerospace applications
Williams, G., Trask, R., & Bond, I. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.01.013 · Cited by 518 · see citing works
Oil palm biomass as a sustainable energy source: A Malaysian case study
Shuit, S. H., Tan, K. T., Lee, K. T., & Kamaruddin, A. H. (2009) · Energy · doi:10.1016/j.energy.2009.05.008 · Cited by 503 · see citing works
Huda, M. S., Drzal, L. T., Mohanty, A. K., et al. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.10.015 · Cited by 489 · see citing works
Recent advances in epoxy resin, natural fiber-reinforced epoxy composites and their applications
Saba, N., Jawaid, M., Alothman, O. Y., et al. (2015) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684415618459 · Cited by 488 · see citing works
Self-citationJawaid, M., Khalil, H. P. S. A., Hassan, A., et al. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.04.068 · Cited by 485 · see citing works
Self-citationRecent Advances in the Application of Natural Fiber Based Composites
Pandey, J. K., Ahn, S., Lee, C. S., Mohanty, A. K., & Misra, M. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000095 · Cited by 438 · see citing works
Characterization of banana, sugarcane bagasse and sponge gourd fibers of Brazil
Guimarães, J. L., Frollini, E., da Silva, C. G., Wypych, F., & Satyanarayana, K. G. (2009) · Industrial Crops and Products · doi:10.1016/j.indcrop.2009.07.013 · Cited by 414 · see citing works
Mechanical properties of hemp fibre reinforced cement: Influence of the fibre/matrix interaction
Sedan, D., Pagnoux, C., Smith, A., et al. (2007) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2007.05.019 · Cited by 378 · see citing works
Asim, M., Jawaid, M., Abdan, K., et al. (2016) · Journal of Bionic Engineering · doi:10.1016/s1672-6529(16)60315-3 · Cited by 360 · see citing works
Self-citationBeckermann, G. W., & Pickering, K. L. (2008) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.03.010 · Cited by 357 · see citing works
Brazilian waste fibres as reinforcement for cement-based composites
Savastano, H., Warden, P. G., & Coutts, R. S. P. (2000) · Cement and Concrete Composites · doi:10.1016/s0958-9465(00)00034-2 · Cited by 348 · see citing works
Arrakhiz, F. Z., Achaby, M. E., Malha, M., Bensalah, M. O., Fassi‐Fehri, O., Bouhfid, R., Benmoussa, K., & Qaiss, A. E. K. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.06.056 · Cited by 315 · see citing works
Bio-ethanol from lignocellulose: Status, perspectives and challenges in Malaysia
Goh, C. S., Tan, K. T., Lee, K. T., & Bhatia, S. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.08.080 · Cited by 284 · see citing works
Natural fiber-reinforced polymer composites
Taj, S. A., Khan, S., & Munawar, M. A. (2007) · Proceedings of the Pakistan Academy of Sciences · Cited by 279 · see citing works
Izani, M. A. N., Tahir, P. M., Uyup, M. K. A., et al. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.07.027 · Cited by 275 · see citing works
Natural fiber polymer composites: A review
Saheb, D. N., & Jog, J. P. (1999) · Advances in Polymer Technology · doi:10.1002/(sici)1098-2329(199924)18:4 · Cited by 259 · see citing works
Biomass and bioenergy: An overview of the development potential in Turkey and Malaysia
Ozturk, M., Saba, N., Altay, V., Iqbal, R., Hakeem, K. R., Jawaid, M., & Ibrahim, F. H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.111 · Cited by 255 · see citing works
Self-citationSaba, N., Paridah, M. T., Abdan, K., et al. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.06.131 · Cited by 244 · see citing works
Self-citationWoven hybrid biocomposites: Dynamic mechanical and thermal properties
Jawaid, M., Khalil, H. P. S. A., & Alattas, O. S. (2011) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.11.001 · Cited by 212 · see citing works
Self-citationYahaya, R., Sapuan, S. M., Jawaid, M., et al. (2015) · Defence Technology · doi:10.1016/j.dt.2015.08.005 · Cited by 203 · see citing works
Self-citationPolypropylene composites with enzyme modified abaca fibre
Bledzki, A. K., Mamun, A. A., Jaszkiewicz, A., et al. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.02.003 · Cited by 198 · see citing works
Effects of natural fibres reinforcement in lime plasters (kenaf and sisal vs. Polypropylene)
Bella, G. D., Fiore, V., Galtieri, G., et al. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.02.026 · Cited by 176 · see citing works
Biomass energy in Malaysia: Current state and prospects
Mekhilef, S., Saidur, R., Safari, A., & Mustaffa, W. E. S. B. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.04.016 · Cited by 171 · see citing works
Effect of high strain rate on glass/carbon/hybrid fiber reinforced epoxy laminated composites
Naresh, K., Shankar, K., Rao, B. S., et al. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.06.007 · Cited by 169 · see citing works
Zamri, M. H., Akil, H. M., Bakar, A. A., et al. (2011) · Journal of Composite Materials · doi:10.1177/0021998311410488 · Cited by 165 · see citing works
Comparative Study of Dielectric Properties of Hybrid Natural Fiber Composites
Jayamani, E., Hamdan, S., Rahman, M. R., et al. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.12.280 · Cited by 160 · see citing works
Nonwood Fibers—A Potential Source of Raw Material in Papermaking
Ashori, A. (2006) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602550600728976 · Cited by 149 · see citing works
Tawakkal, I. S. M. A., Cran, M. J., & Bigger, S. W. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.06.032 · Cited by 137 · see citing works
Chemical modification of hemp fibers by silane coupling agents
Rachini, A., Troëdec, M. L., Peyratout, C. S., et al. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34530 · Cited by 123 · see citing works
Nanoclay Reinforced Polymer Composites
Jawaid, M., Qaiss, A. E. K., & Bouhfid, R. (2016) · Engineering materials · doi:10.1007/978-981-10-0950-1 · Cited by 119 · see citing works
Self-citationJawaid, M., & Khalil, H. P. S. A. (2011) · BioResources · doi:10.15376/biores.6.3.2309-2322 · Cited by 116 · see citing works
Self-citationFlax fibre reinforced PLA/TPS biocomposites flame retarded with multifunctional additive system
Bocz, K., Szolnoki, B., Marosi, A., Tábi, T., Władyka‐Przybylak, M., & Marosi, G. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.10.025 · Cited by 116 · see citing works
Asim, M., Jawaid, M., Nasir, M., et al. (2017) · JOURNAL OF RENEWABLE MATERIALS · doi:10.7569/jrm.2017.634162 · Cited by 115 · see citing works
Self-citationJuarez-Alvarado, C. A., Durán, A., Valdez, P., et al. (2006) · Building and Environment · doi:10.1016/j.buildenv.2005.12.005 · Cited by 114 · see citing works
Renewable Resource-Based Green Polymer Composites: Analysis and Characterization
Thakur, V. K., Singha, A. S., & Mehta, I. K. (2010) · International Journal of Polymer Analysis and Characterization · doi:10.1080/10236660903582233 · Cited by 104 · see citing works
Woven hybrid composites: Water absorption and thickness swelling behaviors
Khalil, H. P. S. A., Jawaid, M., & Bakar, A. A. (2011) · BioResources · doi:10.15376/biores.6.2.1043-1052 · Cited by 103 · see citing works
Self-citationNetravali, A. N., Huang, X., & Mizuta, K. (2007) · Advanced Composite Materials · doi:10.1163/156855107782325230 · Cited by 103 · see citing works
Islam, M. S., Hasbullah, N. A. B., Hasan, M., et al. (2015) · Materials Today Communications · doi:10.1016/j.mtcomm.2015.05.001 · Cited by 94 · see citing works
Petchwattana, N., & Covavisaruch, S. (2014) · Journal of Bionic Engineering · doi:10.1016/s1672-6529(14)60074-3 · Cited by 88 · see citing works
Asim, M., Jawaid, M., Abdan, K., et al. (2017) · Fibers and Polymers · doi:10.1007/s12221-017-1236-0 · Cited by 76 · see citing works
Self-citationBanana fiber-reinforced biodegradable soy protein composites
Kumar, R., Choudhary, V., Mishra, S., et al. (2008) · Frontiers of Chemistry in China · doi:10.1007/s11458-008-0069-1 · Cited by 75 · see citing works
Natural Fiber Composites in Automotive Applications
Suddell, B. C., & Evans, W. J. (2005) · CRC Press eBooks · doi:10.1201/9780203508206.ch7 · Cited by 74 · see citing works
Natural fibres as construction materials
Ali, M. M. (2012) · Journal of Civil Engineering and Construction Technology · doi:10.5897/jcect11.100 · Cited by 66 · see citing works
Sreekala, M. S., Kumaran, M. G., Geethakumariamma, M. L., et al. (2004) · Advanced Composite Materials · doi:10.1163/1568551042580154 · Cited by 53 · see citing works
An overview of biomass energy utilization in Vojvodina
Dodić, S. N., Popov, S. D., Dodić, J., et al. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.010 · Cited by 46 · see citing works
Laccase application in medium density fibreboard to prepare a bio-composite
Nasir, M., Gupta, A. K., Beg, M. D. H., Chua, G. K., & Asim, M. (2014) · RSC Advances · doi:10.1039/c3ra40593a · Cited by 43 · see citing works
Self-citationJoseph, S., Sreekala, M. S., Koshy, P., et al. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27425 · Cited by 43 · see citing works
Mechanical and thermal properties of chemical treated kenaf fibres reinforced polyester composites
Khalil, H. P. S. A., Suraya, N. L. M., Atiqah, N., et al. (2012) · Journal of Composite Materials · doi:10.1177/0021998312465026 · Cited by 39 · see citing works
Majeed, K., Hassan, A., Bakar, A. A., et al. (2014) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705714554492 · Cited by 37 · see citing works
Biocomposites: Their multifunctionality
Lau, K.-T., Ho, M.-P., Au-Yeung, C. T., et al. (2010) · International Journal of Smart and Nano Materials · doi:10.1080/19475411003589780 · Cited by 33 · see citing works
Pandey, P., Bajwa, D. S., Ulven, C. A., et al. (2016) · Materials · doi:10.3390/ma9050390 · Cited by 23 · see citing works
Natural Fiber Composites for Building Applications
Singh, R., & Gupta, M. (2005) · CRC Press eBooks · doi:10.1201/9780203508206.ch8 · Cited by 20 · see citing works
Manufacturing and Processing of Kenaf Fibre-Reinforced Epoxy Composites via Different Methods
Saba, N., Paridah, M. T., Jawaid, M., et al. (2015) · Springer eBooks · doi:10.1007/978-3-319-07944-8_5 · Cited by 16 · see citing works
Self-citation
Flagged first, then by citations
Cited by
Sorted by citations
Application of weibull mixture model to illustrate wheat straw black liquor pyrolysis kinetics
Singh, S. P. (2020) · SN Applied Sciences · doi:10.1007/s42452-020-03861-1 · Cited by 4 · see citing works
- Authors
- Asim, M., Saba, N., Jawaid, M., & Nasir, M.
- Affiliations
- Universiti Putra Malaysia (MY)
- Forest Research Institute (IN)
- Venue
- Sustainable Composites for Aerospace Applications
- Publisher
- Elsevier
- Published
- 2018
- Pages
- 253-268
- OpenAlex
- W2802529370
- Cited by
- 107
- References
- 78
- Citations by year
- 2026: 12 · 2025: 14 · 2024: 27 · 2023: 15 · 2022: 14 · 2021: 16 · 2020: 5 · 2019: 4
- FWCI
- 8.06
- Type
- book chapter
- Language
- en
- Open access
- closed
- Locations
- Elsevier eBooks (publishedVersion)
- Funders
- Universiti Putra Malaysia
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Engineering › Mechanical Engineering › Fiber-reinforced polymer composites
- Physical Sciences › Materials Science › General Materials Science › Material Properties and Applications
- Keywords
- natural fiber composites, biomass fillers, polymer composites, aerospace applications, hybrid composites, thermoset polymers, thermoplastics, lignocellulosic materials, aircraft components, weight loss, radar absorbing materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
