CoChat

Determination of bisphenols A and F and their diglycidyl ethers in wastewater and river water by coacervative extraction and liquid chromatography–fluorimetry

Open access
Ballesteros-Gómez, Ana, Ruiz, Francisco-Javier, Rubio, Soledad, Pérez-Bendito, Dolores · 2007 · Analytica Chimica Acta
Cited by 106

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

A simple, rapid and sensitive analytical method was developed for the simultaneous determination of bisphenol A (BPA), bisphenol F (BPF) and their corresponding diglycidyl ethers (BADGE and BFDGE) in wastewater and river water, in order to have a useful tool for evaluating their fate and distribution in aquatic environments. It was based on their extraction with coacervates made up of decanoic acid reverse micelles and subsequent determination by liquid chromatography-fluorimetry. The procedure involved the extraction of 10.8 mL of water sample for 5 min, its centrifugation for 10 min to accelerate phase separation and then the chromatographic analysis of the target compounds. Clean-up or solvent evaporation steps were not necessary to get the required sensitivity and selectivity. Extraction efficiencies and concentration factors mainly depended on the amount of decanoic acid and tetrahydrofuran making up the coacervate. A general equation for the prediction of the volume of the coacervate as a function of its components has been proposed and fitted by nonlinear regression. This equation permits to know a priori the maximum concentration factors that can be achieved under given experimental conditions. Extractions were independent of salt addition (up to 1 M), the temperature (up to 60 degrees C) and the pH (below 4) rendering the method robust. Recoveries in samples ranged between about 80 and 92% and the actual concentrations factors were between 87 and 102, which resulted in practical detection limits around 30-35 ng L(-1). The method was successfully applied to the determination of the target pollutants in raw and treated sewage from four mechanical-biological treatment plants and three rivers. Bisphenols and their diglycidyl ethers were present in wastewater influents at concentrations in the range 0.96 to 1.6 microg L(-1). The biological treatment at the wastewater treatment plants (WWTP(s)) studied reduced the concentration of BPA and BPF in a percentage above 75%, while diglycidyl ethers were not detected in most of the effluents investigated. Only BPA was detected in surface waters.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.aca.2007.09.048

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 106

Metadata

Authors
Ballesteros-Gómez, A., Ruiz, F.-J., Rubio, S., & Pérez-Bendito, D.
Venue
Analytica Chimica Acta
Publisher
Elsevier BV
Published
2007-11
Volume
603
Issue
1
Pages
51-59
ISSN
0003-2670 (ISSN-L)
OpenAlex
W2032191878
Cited by
106
References
1
FWCI
4.85
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.