The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Effect of high-temperature aging on the thermal conductivity of nanocrystalline tetragonal yttria-stabilized zirconia
Abstract
The thermal conductivity of yttria-stabilized zirconia (YSZ) thermal barrier coatings increases with high-temperature aging. This common observation has been attributed to the densification of the coatings as porosity sinters out and pores and cracks spheroidize to minimize their surface energy. We show that the thermal conductivity of fully-dense 3 mol.% Y 2 O 3 stabilized zirconia (3YSZ) also increases with high-temperature aging, indicating that densification and pore shape changes alone are not responsible for all the observed increase in thermal conductivity of coatings. Instead, there are also increases due to a combination of phase separation and grain growth. The increase in thermal conductivity can be described by a Larson–Miller parameter. It is also found that the increase in thermal conductivity with aging is greatest when measured at room temperature and decreases with increasing measurement temperature. Measured at 1000 °C, the thermal conductivity of zirconia is almost temperature independent and the changes in thermal conductivity with aging are less than 15%, even after aging for 50 h at 1400 °C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Model for Lattice Thermal Conductivity at Low Temperatures
Callaway, J. (1959) · Physical Review · doi:10.1103/physrev.113.1046 · Cited by 3,218
Effective thermal conductivity of particulate composites with interfacial thermal resistance
Nan, C.-W., Birringer, R., Clarke, D. R., & Gleiter, H. (1997) · Journal of Applied Physics · doi:10.1063/1.365209 · Cited by 2,009
Self-citationThe Scattering of Low-Frequency Lattice Waves by Static Imperfections
Klemens, P. G. (1955) · Proceedings of the Physical Society. Section A · doi:10.1088/0370-1298/68/12/303 · Cited by 1,457
Effective Thermal Conductivity of Composites with Interfacial Thermal Barrier Resistance
Hasselman, D. P. H., & Johnson, L. F. (1987) · Journal of Composite Materials · doi:10.1177/002199838702100602 · Cited by 1,355
Materials Design for the Next Generation Thermal Barrier Coatings
Clarke, D. R., & Levi, C. G. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.011403.113718 · Cited by 1,285
Self-citationEffect of Point Imperfections on Lattice Thermal Conductivity
Callaway, J., & von Baeyer, H. C. (1960) · Physical Review · doi:10.1103/physrev.120.1149 · Cited by 1,168
Interfacial thermal resistance in nanocrystalline yttria-stabilized zirconia
Yang, H.-S., Bai, G.-R., Thompson, L. J., & Eastman, J. A. (2002) · Acta Materialia · doi:10.1016/s1359-6454(02)00057-5 · Cited by 324
Superresolution Multidimensional Imaging with Structured Illumination Microscopy
Jost, A., & Heintzmann, R. (2013) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-071312-121648 · Cited by 318
Zhu, D., & Miller, R. A. (2000) · Journal of Thermal Spray Technology · doi:10.1361/105996300770349890 · Cited by 258
Kilo, M., Argirusis, C., Borchardt, G., & Jackson, R. A. (2003) · Phys. Chem. Chem. Phys. · doi:10.1039/b300151m · Cited by 251
Determining the Kapitza resistance and the thermal conductivity of polycrystals: A simple model
Nan, C.-W., & Birringer, R. (1998) · Physical Review B · doi:10.1103/physrevb.57.8264 · Cited by 235
Chi, W., Sampath, S., & Wang, H. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02476.x · Cited by 187
Bisson, J., Fournier, D., Poulain, M., Lavigne, O., & Mévrel, R. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01502.x · Cited by 181
Lu, T. J., Levi, C. G., Wadley, H. N. G., & Evans, A. G. (2001) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2001.tb01118.x · Cited by 153
Thermal Conductivity: XII, Temperature Dependence of Conductivity for Single‐Phase Ceramics
KINGERY, W. D. (1955) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1955.tb14940.x · Cited by 147
Lattice thermal conductivity of minerals at high temperatures
Roufosse, M. C., & Klemens, P. G. (1974) · Journal of Geophysical Research Atmospheres · doi:10.1029/jb079i005p00703 · Cited by 133
Effect of morphology on thermal conductivity of EB-PVD PYSZ TBCs
Renteria, A. F., Saruhan, B., Schulz, U., Rätzer‐Scheibe, H. ‐., Haug, J., & Wiedenmann, A. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.05.003 · Cited by 132
Cation self-diffusion of Ca44, Y88, and Zr96 in single-crystalline calcia- and yttria-doped zirconia
Kilo, M., Taylor, M. A., Argirusis, C., Borchardt, G., Lesage, B., Weber, S., Scherrer, S., Scherrer, H., Schroeder, M., & Martin, M. (2003) · Journal of Applied Physics · doi:10.1063/1.1628379 · Cited by 129
Tan, Y., Longtin, J. P., Sampath, S., et al. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.02953.x · Cited by 113
Effect of Heat Treatment on the Thermal Conductivity of Plasma-Sprayed Thermal Barrier Coatings
Dutton, R. E., Wheeler, R. A., & Ravichandran, K. S. (2000) · Journal of Thermal Spray Technology · doi:10.1361/105996300770349935 · Cited by 109
Evolution of thermal properties of EB-PVD 7YSZ thermal barrier coatings with thermal cycling
Kakuda, T. R., Limarga, A. M., Bennett, T. D., & Clarke, D. R. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.02.019 · Cited by 64
Self-citationLimarga, A. M., Iveland, J., Gentleman, M. M., Lipkin, D. M., & Clarke, D. R. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.10.049 · Cited by 49
Self-citation
Metadata
- Authors
- Limarga, A. M., Shian, S., Baram, M., & Clarke, D. R.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2012-09
- Volume
- 60
- Issue
- 15
- Pages
- 5417-5424
- ISSN
- 1359-6454
- Cited by
- 84
- References
- 22
- Language
- en
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.