The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy
Open accessAbstract
Abstract High-entropy alloys (HEAs) are evolving multi-component intermetallic systems, wherein multiple principal elements tend to form single solid-solution-like phases with a strong tendency to solid solution strengthening. In this study, an Nb25Mo25Ta25W25 refractory HEA was synthesized by arc melting and well homogenized at 1800 °C. Single-crystalline HEA pillars in two orientations ([0 0 1] and [3 1 6]) and with diameters ranging from 2 μm to 200 nm were produced by focused ion beam milling and compressed using a flat-punch tip in a nanoindenter. The HEA pillar samples can reach extraordinarily high strength levels of ∼4–4.5 GPa, which is ∼3–3.5 times higher than that of the bulk HEA; meanwhile the ductility is significantly improved. Compared to pure Nb, Mo, Ta and W pillars, the HEA pillars exhibit higher strengths than any of them in both absolute and normalized values, and the HEA pillars also show relatively low compressive size effects, as evaluated by the log–log slope of strength vs. pillar diameter. The higher strength levels and lower size dependence for the HEA could be attributed to the increased lattice resistance caused by localized distortion at atomic length scales. The correlation between normalized strengths, length scales and temperatures for body-centered cubic structured pillars is illustrated, and the relevance of a size-effect slope as well as the additivity of strengthening mechanisms is critically discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sheldrick, G. M. (2008) · Acta Crystallographica Section A Foundations of Crystallography · doi:10.1107/s0108767307043930 · Cited by 87,804
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Refractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,950
Nabarro, F. R. N., Duesbery, M. S., Hirth, J. P., & Kubin, L. P. (1979) · Cited by 2,675
Denton, A. R., & Ashcroft, N. W. (1991) · Physical Review A · doi:10.1103/physreva.43.3161 · Cited by 2,595
Sample Dimensions Influence Strength and Crystal Plasticity
Uchic, M. D., Dimiduk, D. M., Florando, J. N., & Nix, W. D. (2004) · Science · doi:10.1126/science.1098993 · Cited by 2,330
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
Greer, J. R., & De Hosson, J. T. M. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.01.005 · Cited by 1,763
Greer, J. R., Oliver, W. C., & Nix, W. D. (2005) · Acta Materialia · doi:10.1016/j.actamat.2004.12.031 · Cited by 1,501
Hull, D., & Bacon, D. J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70217-6 · Cited by 1,501
(2001) · Elsevier eBooks · doi:10.1016/b978-0-7506-4681-9.x5000-7 · Cited by 1,417
Size effects in materials due to microstructural and dimensional constraints: a comparative review
Arzt, E. (1998) · Acta Materialia · doi:10.1016/s1359-6454(98)00231-6 · Cited by 1,180
Mechanical performance of the Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements
Tong, C.-J., Chen, M.-R., Yeh, J.-W., Lin, S.-J., Chen, S.-K., Shun, T.-T., & Chang, S.-Y. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0218-9 · Cited by 904
Multi‐Principal‐Element Alloys with Improved Oxidation and Wear Resistance for Thermal Spray Coating
Huang, P. ‐., Yeh, J. ‐., Shun, T. ‐., & Chen, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300507 · Cited by 841
Plasticity of Micrometer-Scale Single Crystals in Compression
Uchic, M. D., Shade, P. A., & Dimiduk, D. M. (2009) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082908-145422 · Cited by 770
Yeh, J.-W., Chang, S.-Y., Hong, Y.-D., Chen, S.-K., & Lin, S.-J. (2007) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2007.01.003 · Cited by 742
Size-affected single-slip behavior of pure nickel microcrystals
Dimiduk, D. M., Uchic, M. D., & Parthasarathy, T. A. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.05.023 · Cited by 717
Senkov, O. N., Senkova, S. V., Woodward, C., & Miracle, D. B. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.032 · Cited by 674
High-Entropy Alloys – A New Era of Exploitation
Yeh, J. W., Chen, Y. L., Lin, S. J., & Chen, S. K. (2007) · Materials Science Forum · doi:10.4028/www.scientific.net/msf.560.1 · Cited by 658
Scale-Free Intermittent Flow in Crystal Plasticity
Dimiduk, D. M., Woodward, C., LeSar, R., & Uchic, M. D. (2006) · Science · doi:10.1126/science.1123889 · Cited by 587
Parthasarathy, T. A., Rao, S. I., Dimiduk, D. M., Uchic, M. D., & Trinkle, D. R. (2007) · Scripta Materialia · doi:10.1016/j.scriptamat.2006.09.016 · Cited by 548
In situ observation of dislocation nucleation and escape in a submicrometre aluminium single crystal
Oh, S. H., Legros, M., Kiener, D., & Dehm, G. (2009) · Nature Materials · doi:10.1038/nmat2370 · Cited by 482
Plasticity in Confined Dimensions
Kraft, O., Gruber, P. A., Mönig, R., & Weygand, D. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082908-145409 · Cited by 429
Tensile and compressive behavior of tungsten, molybdenum, tantalum and niobium at the nanoscale
Kim, J.-Y., Jang, D., & Greer, J. R. (2010) · Acta Materialia · doi:10.1016/j.actamat.2009.12.022 · Cited by 364
Incipient plasticity and dislocation nucleation of FeCoCrNiMn high-entropy alloy
Zhu, C., Lu, Z. P., & Nieh, T. G. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.059 · Cited by 342
Effect of temperature on mechanical properties of Al0.5CoCrCuFeNi wrought alloy
Tsai, C.-W., Tsai, M.-H., Yeh, J.-W., & Yang, C.-C. (2010) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.10.088 · Cited by 293
Stochastic nature of plasticity of aluminum micro-pillars
Ng, K. S., & Ngan, A. H. W. (2008) · Acta Materialia · doi:10.1016/j.actamat.2007.12.016 · Cited by 275
Tensile and compressive behavior of gold and molybdenum single crystals at the nano-scale
Kim, J.-Y., & Greer, J. R. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.07.027 · Cited by 262
Surface-controlled dislocation multiplication in metal micropillars
Weinberger, C. R., & Wei Cai, A. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0806118105 · Cited by 242
Materials Science and Technology: A Comprehensive Treatment
(2007) · Wiley eBooks · doi:10.1002/9783527603978 · Cited by 231
Local Atomic Structure of a High-Entropy Alloy: An X-Ray and Neutron Scattering Study
Guo, W., Dmowski, W., Noh, J.-Y., Rack, P., Liaw, P. K., & Egami, T. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1474-0 · Cited by 225
Estimating the strength of single-ended dislocation sources in micron-sized single crystals
Rao, S. I., Dimiduk, D. M., Tang, M., Uchic, M. D., Parthasarathy, T. A., & Woodward, C. (2007) · Philosophical Magazine · doi:10.1080/14786430701591513 · Cited by 188
Dehm, G. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2009.03.005 · Cited by 165
Korte‐Kerzel, S., & Clegg, W. J. (2010) · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786435.2010.505179 · Cited by 161
A universal scaling law for the strength of metal micropillars and nanowires
Dou, R., & Derby, B. (2009) · Scripta Materialia · doi:10.1016/j.scriptamat.2009.05.012 · Cited by 159
Cited by
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Development and exploration of refractory high entropy alloys—A review
Senkov, O. N., Miracle, D. B., Chaput, K. J., & Couzinie, J.-P. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.153 · Cited by 1,631
Mechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
Li, Z., Zhao, S., Ritchie, R. O., & Meyers, M. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.12.003 · Cited by 1,171
High-entropy alloys: a critical assessment of their founding principles and future prospects
Pickering, E. J., & Jones, N. G. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1180020 · Cited by 1,062
Metadata
- Authors
- Zou, Y., Maiti, S., Steurer, W., & Spolenak, R.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2014-02
- Volume
- 65
- Pages
- 85-97
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W1967894805
- Cited by
- 541
- References
- 35
- FWCI
- 22.14
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.