The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Slip band–grain boundary interactions in commercial-purity titanium
Abstract
The interaction between slip bands and grain boundaries in commercial-purity titanium was examined using cross-correlation-based electron backscatter diffraction. At a low strain level, three types of interactions were observed: blocked slip band with stress concentration; slip transfer; and blocked slip band with no stress concentration. The stress concentration induced by the blocked slip band was fitted with Eshelby’s theoretical model, from which a Hall–Petch coefficient was deduced. It was found that the Hall–Petch coefficient varies with the individual grain boundary. We investigated the geometric alignment between the slip band and various slip systems to the neighbouring grain. Stress concentration can be induced by the blocked slip band if the slip system is poorly aligned with 〈 a 〉 prismatic, pyramidal or basal slip systems in the neighbouring grain. Transfer of slip across the boundary occurs when there is good alignment on 〈 a 〉 prismatic or 〈 a 〉 pyramidal slip systems. Other stress-relieving mechanisms are possible when the best alignment is not with the slip system that has the lower critical resolved shear stress.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Deformation and Ageing of Mild Steel: III Discussion of Results
Hall, E. O. (1951) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/64/9/303 · Cited by 7,872
Hall–Petch relation and boundary strengthening
Hansen, N. (2004) · Scripta Materialia · doi:10.1016/j.scriptamat.2004.06.002 · Cited by 3,799
The Cleavage Strength of Polycrystals
Petch, N. J. (1953) · Medical Entomology and Zoology · Cited by 3,641
Some geometrical relations in dislocated crystals
Nye, J. F. (1953) · Acta Metallurgica · doi:10.1016/0001-6160(53)90054-6 · Cited by 2,328
Electron Backscatter Diffraction in Materials Science
(2009) · Springer eBooks · doi:10.1007/978-0-387-88136-2 · Cited by 1,753
Yield Point Phenomena in Metals and Alloys
Hall, E. O. (1970) · Springer eBooks · doi:10.1007/978-1-4684-1860-6 · Cited by 594
Energy of slip transmission and nucleation at grain boundaries
Sangid, M. D., Ezaz, T., Sehitoglu, H., & Robertson, I. M. (2011) · Acta Materialia · doi:10.1016/j.actamat.2010.09.032 · Cited by 429
Bieler, T. R., Eisenlohr, P., Roters, F., Kumar, D., Mason, D. E., Crimp, M. A., & Raabe, D. (2008) · International Journal of Plasticity · doi:10.1016/j.ijplas.2008.09.002 · Cited by 411
Wilkinson, A. J., & Randman, D. (2010) · Philosophical Magazine · doi:10.1080/14786430903304145 · Cited by 343
Self-citationThe role of grain boundaries on fatigue crack initiation – An energy approach
Sangid, M. D., Maier, H. J., & Sehitoglu, H. (2011) · International Journal of Plasticity · doi:10.1016/j.ijplas.2010.09.009 · Cited by 295
Cited by
Selective increase in CO 2 electroreduction activity at grain-boundary surface terminations
Mariano, R. G., McKelvey, K., White, H. S., & Kanan, M. W. (2017) · Science · doi:10.1126/science.aao3691 · Cited by 818
Metadata
- Authors
- Guo, Y., Britton, T. B., & Wilkinson, A. J.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2014-09
- Volume
- 76
- Pages
- 1-12
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2107128216
- Cited by
- 402
- References
- 13
- FWCI
- 8.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Slip band–grain boundary interactions in commercial-purity titanium. https://app.cochat.ai/papers/10.1016/j.actamat.2014.05.015
- The paper
- Guo, Y., Britton, T. B., & Wilkinson, A. J. (2014). Slip band–grain boundary interactions in commercial-purity titanium. Acta Materialia. https://doi.org/10.1016/j.actamat.2014.05.015
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.