The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Determination of elastic strain fields and geometrically necessary dislocation distributions near nanoindents using electron back scatter diffraction
Abstract
The deformation around a 500-nm deep Berkovich indent in a large grained Fe sample has been studied using high resolution electron back scatter diffraction (EBSD). EBSD patterns were obtained in a two-dimensional map around the indent on the free surface. A cross-correlation-based analysis of small shifts in many sub-regions of the EBSD patterns was used to determine the variation of elastic strain and lattice rotations across the map at a sensitivity of ∼±10−4. Elastic strains were smaller than lattice rotations, with radial strains found to be compressive and hoop strains tensile as expected. Several analyses based on Nye's dislocation tensor were used to estimate the distribution of geometrically necessary dislocations (GNDs) around the indent. The results obtained using different assumed dislocation geometries, optimisation routines and different contributions from the measured lattice rotation and strain fields are compared. Our favoured approach is to seek a combination of GND types which support the six measurable (of a possible nine) gradients of the lattice rotations after correction for the 10 measurable elastic strain gradients, and minimise the total GND line energy using an L1 optimisation method. A lower bound estimate for the noise on the GND density determination is ∼±1012 m−2 for a 200-nm step size, and near the indent densities as high as 1015 m−2 were measured. For comparison, a Hough-based analysis of the EBSD patterns has a much higher noise level of ∼±1014m−2 for the GND density.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Indentation size effects in crystalline materials: A law for strain gradient plasticity
Nix, W. D., & Gao, H. (1998) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(97)00086-0 · Cited by 4,394
Some geometrical relations in dislocated crystals
Nye, J. F. (1953) · Acta Metallurgica · doi:10.1016/0001-6160(53)90054-6 · Cited by 2,328
Electron Backscatter Diffraction in Materials Science
(2009) · Springer eBooks · doi:10.1007/978-0-387-88136-2 · Cited by 1,753
Size dependent hardness of silver single crystals
Ma, Q., & Clarke, D. R. (1995) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1995.0853 · Cited by 1,314
Review Grain and subgrain characterisation by electron backscatter diffraction
Humphreys, F. J. (2001) · Journal of Materials Science · doi:10.1023/a:1017973432592 · Cited by 1,054
The correlation of the indentation size effect measured with indenters of various shapes
Swadener, J. G., George, E. P., & Pharr, G. M. (2002) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00103-x · Cited by 784
Electron Backscatter Diffraction in Materials Science
(2000) · Springer eBooks · doi:10.1007/978-1-4757-3205-4 · Cited by 674
Microindentations on W and Mo oriented single crystals: An STM study
Stelmashenko, N. A., Walls, M. G., Brown, L. M., & Milman, Y. V. (1993) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(93)90100-7 · Cited by 673
Observations of lattice curvature near the interface of a deformed aluminium bicrystal
Sun, S., Adams, B. L., & King, W. E. (2000) · Philosophical Magazine A · doi:10.1080/01418610008212038 · Cited by 284
Accuracy assessment of elastic strain measurement by EBSD
Villert, S., Maurice, C., Wyon, C., & Fortunier, R. (2009) · Journal of Microscopy · doi:10.1111/j.1365-2818.2009.03120.x · Cited by 151
Cited by
Zhu, Y., & Wu, X. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101019 · Cited by 1,537
Selective increase in CO 2 electroreduction activity at grain-boundary surface terminations
Mariano, R. G., McKelvey, K., White, H. S., & Kanan, M. W. (2017) · Science · doi:10.1126/science.aao3691 · Cited by 818
Alloys-by-design: Application to new superalloys for additive manufacturing
Tang, Y. T., Panwisawas, C., Ghoussoub, J. N., Gong, Y., Clark, J. W. G., Németh, A. A. N., McCartney, D. G., & Reed, R. C. (2021) · Acta Materialia · doi:10.1016/j.actamat.2020.09.023 · Cited by 678
Slip band–grain boundary interactions in commercial-purity titanium
Guo, Y., Britton, T. B., & Wilkinson, A. J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.015 · Cited by 402
Self-citationEvolution of dislocation density distributions in copper during tensile deformation
Jiang, J., Britton, T. B., & Wilkinson, A. J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.08.027 · Cited by 303
Self-citation
Metadata
- Authors
- Wilkinson, A. J., & Randman, D.
- Venue
- Philosophical Magazine
- Publisher
- Informa UK Limited
- Published
- 2010-03-21
- Volume
- 90
- Issue
- 9
- Pages
- 1159-1177
- ISSN
- 1478-6433 (ISSN-L)
- 1478-6435
- 1478-6443
- OpenAlex
- W2049993793
- Cited by
- 343
- References
- 10
- FWCI
- 6.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Determination of elastic strain fields and geometrically necessary dislocation distributions near nanoindents using electron back scatter diffraction. https://app.cochat.ai/papers/10.1080/14786430903304145
- The paper
- Wilkinson, A. J., & Randman, D. (2010). Determination of elastic strain fields and geometrically necessary dislocation distributions near nanoindents using electron back scatter diffraction. Philosophical Magazine. https://doi.org/10.1080/14786430903304145
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.