The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition
Open accessAbstract
Abstract Novel ultrafine lamellar (α + β) microstructures comprising ultrafine (∼200–300 nm) α-laths and retained β phases were created via promoting in situ decomposition of a near α′ martensitic structure in Ti–6Al–4V additively manufactured by selective laser melting (SLM). As a consequence, the total tensile elongation to failure reached 11.4% while maintaining high yield strength above 1100 MPa, superior to both conventional SLM-fabricated Ti–6Al–4V containing non-equilibrium acicular α′ martensite and conventional mill-annealed Ti–6Al–4V. The formation and decomposition of α′ martensite in additively manufactured Ti–6Al–4V was studied via specially designed experiments including single-track deposition, multi-layer deposition and post-SLM heat treatment. The essential SLM additive manufacturing conditions for Ti–6Al–4V including layer thickness, focal offset distance and energy density, under which a near α′ martensitic structure forms in each layer and then in situ transforms into ultrafine lamellar (α + β) structures, were determined. This is the first fundamental effort that has realized complete in situ martensite decomposition in SLM-fabricated Ti–6Al–4V for outstanding mechanical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Materials Properties Handbook: Titanium Alloys
Boyer, R. R., Welsch, G. E., & Collings, E. W. (1994) · Medical Entomology and Zoology · Cited by 2,637
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Donachie, M. J. (1988) · Cited by 1,662
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Phase transformations during cooling in α+β titanium alloys
Ahmed, T., & Rack, H. J. (1998) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00802-2 · Cited by 1,224
Paradox of Strength and Ductility in Metals Processed Bysevere Plastic Deformation
Valiev, R. Z., Alexandrov, I. V., Zhu, Y. T., & Lowe, T. C. (2002) · Journal of Materials Research · doi:10.1557/jmr.2002.0002 · Cited by 1,162
Murr, L. E., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Rodela, A., Martinez, E. Y., Hernandez, D. H., Martinez, E., Medina, F., & Wicker, R. B. (2009) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2008.05.004 · Cited by 997
Rafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0658-0 · Cited by 987
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Al-Bermani, S. S., Blackmore, M., Zhang, W., & Todd, I. (2010) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-010-0397-x · Cited by 860
Murr, L. E., Esquivel, E. V., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Martinez, E. Y., Medina, F., Hernandez, D. H., Martinez, E., Martinez, J. L., et al. (2009) · Materials Characterization · doi:10.1016/j.matchar.2008.07.006 · Cited by 564
Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders
Facchini, L., Magalini, E., Robotti, P., Molinari, A., Höges, S., & Wissenbach, K. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011083371 · Cited by 512
Kelly, S. M., & Kampe, S. L. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-004-0094-8 · Cited by 423
Laser fabrication and machining of materials
(2008) · Choice Reviews Online · doi:10.5860/choice.45-5603 · Cited by 395
Hrabe, N. W., & Quinn, T. P. (2013) · Materials Science and Engineering A · doi:10.1016/j.msea.2013.02.065 · Cited by 349
Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part II. Thermal modeling
Kelly, S. M., & Kampe, S. L. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-004-0095-7 · Cited by 302
Hrabe, N., & Quinn, T. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.02.064 · Cited by 252
Brandl, E., Palm, F., Michailov, V., Viehweger, B., & Leyens, C. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.06.062 · Cited by 230
Mechanical properties of Ti-6Al-4V specimens produced by shaped metal deposition
Baufeld, B., & van der Biest, O. (2009) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/10/1/015008 · Cited by 186
Zherebtsov, S. V., Salishchev, G. A., Galeyev, R. M., & MAEKAWA, K. (2005) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.46.2020 · Cited by 125
Cited by
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Self-citationMetal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Review on titanium and titanium based alloys as biomaterials for orthopaedic applications
Kaur, M., & Singh, K. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.04.064 · Cited by 1,451
Metadata
- Authors
- Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2015-02
- Volume
- 85
- Pages
- 74-84
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2108272642
- Cited by
- 1,245
- References
- 22
- FWCI
- 44.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.