The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
Open accessAbstract
An equiatomic CoCrFeMnNi high-entropy alloy (HEA), produced by arc melting and drop casting, was subjected to severe plastic deformation (SPD) using high-pressure torsion. This process induced substantial grain refinement in the coarse-grained casting leading to a grain size of approximately 50 nm. As a result, strength increased significantly to 1950 MPa, and hardness to ∼520 HV. Analyses using transmission electron microscopy (TEM) and 3-dimensional atom probe tomography (3D-APT) showed that, after SPD, the alloy remained a true single-phase solid solution down to the atomic scale. Subsequent investigations characterized the evolution of mechanical properties and microstructure of this nanocrystalline HEA upon annealing. Isochronal (for 1 h) and isothermal heat treatments were performed followed by microhardness and tensile tests. The isochronal anneals led to a marked hardness increase with a maximum hardness of ∼630 HV at about 450 °C before softening set in at higher temperatures. The isothermal anneals, performed at this peak hardness temperature, revealed an additional hardness rise to a maximum of about 910 HV after 100 h. To clarify this unexpected annealing response, comprehensive microstructural analyses were performed using TEM and 3D-APT. New nano-scale phases were observed to form in the originally single-phase HEA. After times as short as 5 min at 450 °C, a NiMn phase and Cr-rich phase formed. With increasing annealing time, their volume fractions increased and a third phase, FeCo, also formed. It appears that the surfeit of grain boundaries in the nanocrystalline HEA offer many fast diffusion pathways and nucleation sites to facilitate this phase decomposition. The hardness increase, especially for the longer annealing times, can be attributed to these nano-scaled phases embedded in the HEA matrix. The present results give new valuable insights into the phase stability of single-phase high-entropy alloys as well as the mechanisms controlling the mechanical properties of nanostructured multiphase composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
Bulk nanostructured materials from severe plastic deformation
Valiev, R. Z., Islamgaliev, R. K., & Alexandrov, I. V. (2000) · Progress in Materials Science · doi:10.1016/s0079-6425(99)00007-9 · Cited by 6,478
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Self-citationA Handbook of Lattice Spacings and Structures of Metals and Alloys
(1958) · Elsevier eBooks · doi:10.1016/c2013-0-08243-6 · Cited by 3,753
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Self-citationUsing high-pressure torsion for metal processing: Fundamentals and applications
Zhilyaev, A. P., & Langdon, T. G. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.03.002 · Cited by 2,997
High tensile ductility in a nanostructured metal
Wang, Y., Chen, M., Zhou, F., & Ma, E. (2002) · Nature · doi:10.1038/nature01133 · Cited by 2,945
Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
Tsai, K.-Y., Tsai, M.-H., & Yeh, J.-W. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.058 · Cited by 2,366
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
Estrin, Y. Z., & Vinogradov, A. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.038 · Cited by 1,833
The onset of twinning in metals: a constitutive description
Meyers, M. A., Vöhringer, O., & Lubarda, V. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(01)00300-7 · Cited by 1,695
Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
Otto, F., Yang, Y., Bei, H., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.042 · Cited by 1,445
Self-citationTensile properties of high- and medium-entropy alloys
Gali, A., & George, E. P. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.03.018 · Cited by 1,194
Self-citationExploration and Development of High Entropy Alloys for Structural Applications
Miracle, D., Miller, J., Senkov, O., Woodward, C., Uchic, M., & Tiley, J. (2014) · Entropy · doi:10.3390/e16010494 · Cited by 1,012
Three strategies to achieve uniform tensile deformation in a nanostructured metal
Wang, Y. M., & Ma, E. (2004) · Acta Materialia · doi:10.1016/j.actamat.2003.12.022 · Cited by 942
Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy
Zaddach, A. J., Niu, C., Koch, C. C., & Irving, D. L. (2013) · JOM · doi:10.1007/s11837-013-0771-4 · Cited by 878
Salishchev, G. A., Tikhonovsky, M. A., Shaysultanov, D. G., Stepanov, N. D., Kuznetsov, A. V., Kolodiy, I. V., Tortika, A. S., & Senkov, O. N. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.12.210 · Cited by 702
Sauvage, X., Wilde, G., Divinski, S. V., Horita, Z., & Valiev, R. Z. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.01.080 · Cited by 561
Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy
Bhattacharjee, P. P., Sathiaraj, G. D., Zaid, M., Gatti, J. R., Lee, C., Tsai, C.-W., & Yeh, J.-W. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.10.237 · Cited by 530
Laplanche, G., Gadaud, P., Horst, O., Otto, F., Eggeler, G., & George, E. P. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.061 · Cited by 467
Self-citationEffect of cryo-deformation on structure and properties of CoCrFeNiMn high-entropy alloy
Stepanov, N., Tikhonovsky, M., Yurchenko, N., Zyabkin, D., Klimova, M., Zherebtsov, S., Efimov, A., & Salishchev, G. (2015) · Intermetallics · doi:10.1016/j.intermet.2014.12.004 · Cited by 399
An understanding of high entropy alloys from phase diagram calculations
Zhang, F., Zhang, C., Chen, S. L., Zhu, J., Cao, W. S., & Kattner, U. R. (2014) · Calphad · doi:10.1016/j.calphad.2013.10.006 · Cited by 395
Phase separation in equiatomic AlCoCrFeNi high-entropy alloy
Manzoni, A., Daoud, H., Völkl, R., Glatzel, U., & Wanderka, N. (2013) · Ultramicroscopy · doi:10.1016/j.ultramic.2012.12.015 · Cited by 385
Insights into the phase diagram of the CrMnFeCoNi high entropy alloy
Laurent-Brocq, M., Akhatova, A., Perrière, L., Chebini, S., Sauvage, X., Leroy, E., & Champion, Y. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.01.068 · Cited by 361
Steady state flow of the FeCoNiCrMn high entropy alloy at elevated temperatures
He, J. Y., Zhu, C., Zhou, D. Q., Liu, W. H., Nieh, T. G., & Lu, Z. P. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.06.015 · Cited by 358
Incipient plasticity and dislocation nucleation of FeCoCrNiMn high-entropy alloy
Zhu, C., Lu, Z. P., & Nieh, T. G. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.059 · Cited by 342
Self-diffusion and Impurity Diffusion in Pure Metals: Handbook of Experimental Data
Neumann, G. M., & Tuijn, C. (2008) · Cited by 340
Otto, F., Hanold, N. L., & George, E. P. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.05.014 · Cited by 322
Self-citationPerformance and applications of nanostructured materials produced by severe plastic deformation
Zhu, Y. T., Lowe, T. C., & Langdon, T. G. (2004) · Scripta Materialia · doi:10.1016/j.scriptamat.2004.05.006 · Cited by 307
Hasnaoui, A., Van Swygenhoven, H., & Derlet, P. M. (2002) · Acta Materialia · doi:10.1016/s1359-6454(02)00195-7 · Cited by 239
Influence of stacking fault energy on nanostructure formation under high pressure torsion
Zhao, Y. H., Liao, X. Z., Zhu, Y. T., Horita, Z., & Langdon, T. G. (2005) · Materials Science and Engineering: A · doi:10.1016/j.msea.2005.08.074 · Cited by 209
Polycrystalline elastic moduli of a high-entropy alloy at cryogenic temperatures
Haglund, A., Koehler, M., Catoor, D., George, E. P., & Keppens, V. (2015) · Intermetallics · doi:10.1016/j.intermet.2014.11.005 · Cited by 196
Self-citationSingle-phase high-entropy alloys – an overview
Kozak, R., Sologubenko, A., & Steurer, W. (2015) · Zeitschrift für Kristallographie - Crystalline Materials · doi:10.1515/zkri-2014-1739 · Cited by 187
Tasan, C. C., Deng, Y., Pradeep, K. G., Yao, M. J., Springer, H., & Raabe, D. (2014) · JOM · doi:10.1007/s11837-014-1133-6 · Cited by 185
Cited by
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
Self-citationExceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
Gludovatz, B., Hohenwarter, A., Thurston, K. V. S., Bei, H., Wu, Z., George, E. P., & Ritchie, R. O. (2016) · Nature Communications · doi:10.1038/ncomms10602 · Cited by 1,930
Self-citationHigh entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Self-citationMechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Metadata
- Authors
- Schuh, B., Mendez-Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R., & Hohenwarter, A.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2015-09
- Volume
- 96
- Pages
- 258-268
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W860289966
- Cited by
- 1,323
- References
- 35
- FWCI
- 76.17
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.