The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
An assessment of the lattice strain in the CrMnFeCoNi high-entropy alloy
Open accessAbstract
The formation of single phase solid solutions from combinations of multiple principal elements, with differing atomic radii, has led to the suggestion that the lattices of high-entropy alloys (HEAs) must be severely distorted. To assess this hypothesis, total scattering measurements using neutron radiation have been performed on the CrMnFeCoNi alloy and compared with similar data from five compositionally simpler materials within the same system. The Bragg diffraction patterns from all of the studied materials were similar, consistent with a face-centered cubic structure, and none showed the pronounced dampening that would be expected from a highly distorted lattice. A more detailed evaluation of the local lattice strain was made by considering the first six coordination shells in the pair distribution functions (PDF), obtained from the total scattering data. Across this range, the HEA exhibited the broadest PDF peaks but these widths were not disproportionately larger than those of the simpler alloys. In addition, of all the materials considered, the HEA was at the highest homologous temperature, and hence the thermal vibrations of the atoms would be greatest. Consequently, the level of local lattice strain required to rationalise a given PDF peak width would be reduced. As a result, the data presented in this study do not indicate that the local lattice strain in the equiatomic CrMnFeCoNi HEA is anomalously large.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cullity, B. D., & Weymouth, J. W. (1957) · American Journal of Physics · doi:10.1119/1.1934486 · Cited by 17,935
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
Stabilization of metallic supercooled liquid and bulk amorphous alloys
Inoue, A. (2000) · Acta Materialia · doi:10.1016/s1359-6454(99)00300-6 · Cited by 5,887
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
Prediction of high-entropy stabilized solid-solution in multi-component alloys
Yang, X., & Zhang, Y. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.11.021 · Cited by 2,920
Recent progress in high-entropy alloys
Yeh, J.-W. (2006) · Annales de Chimie Science des Matériaux · doi:10.3166/acsm.31.633-648 · Cited by 2,117
Mantid—Data analysis and visualization package for neutron scattering and μ SR experiments
Arnold, O., Bilheux, J. C., Borreguero, J. M., Buts, A., Campbell, S. I., Chapon, L., Doucet, M., Draper, N., Ferraz Leal, R., Gigg, M. A., et al. (2014) · Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment · doi:10.1016/j.nima.2014.07.029 · Cited by 1,806
Elements of X-Ray Diffraction.
Gregory, N. W. (1957) · Journal of the American Chemical Society · doi:10.1021/ja01564a077 · Cited by 1,685
Wang, W.-R., Wang, W.-L., Wang, S.-C., Tsai, Y.-C., Lai, C.-H., & Yeh, J.-W. (2012) · Intermetallics · doi:10.1016/j.intermet.2012.03.005 · Cited by 1,517
Yeh, J.-W., Lin, S.-J., Chin, T.-S., Gan, J.-Y., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chou, S.-Y. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0234-4 · Cited by 1,252
Tong, C.-J., Chen, Y.-L., Yeh, J.-W., Lin, S.-J., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chang, S.-Y. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0283-0 · Cited by 1,239
High-entropy alloys: a critical assessment of their founding principles and future prospects
Pickering, E. J., & Jones, N. G. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1180020 · Cited by 1,062
Self-citationYeh, J.-W., Chang, S.-Y., Hong, Y.-D., Chen, S.-K., & Lin, S.-J. (2007) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2007.01.003 · Cited by 742
Santodonato, L. J., Zhang, Y., Feygenson, M., Parish, C. M., Gao, M. C., Weber, R. J. K., Neuefeind, J. C., Tang, Z., & Liaw, P. K. (2015) · Nature Communications · doi:10.1038/ncomms6964 · Cited by 708
On the elemental effect of AlCoCrCuFeNi high-entropy alloy system
Tung, C.-C., Yeh, J.-W., Shun, T.-T., Chen, S.-K., Huang, Y.-S., & Chen, H.-C. (2007) · Materials Letters · doi:10.1016/j.matlet.2006.03.140 · Cited by 629
Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys
Senkov, O. N., & Miracle, D. B. (2001) · Materials Research Bulletin · doi:10.1016/s0025-5408(01)00715-2 · Cited by 583
Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi
Pickering, E. J., Muñoz-Moreno, R., Stone, H. J., & Jones, N. G. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.10.025 · Cited by 555
Self-citationSize-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy
Zou, Y., Maiti, S., Steurer, W., & Spolenak, R. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.11.049 · Cited by 541
RMCProfile: reverse Monte Carlo for polycrystalline materials
Tucker, M. G., Keen, D. A., Dove, M. T., Goodwin, A. L., & Hui, Q. (2007) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/19/33/335218 · Cited by 527
Self-citationPhysical Metallurgy of High-Entropy Alloys
Yeh, J.-W. (2015) · JOM · doi:10.1007/s11837-015-1583-5 · Cited by 488
An understanding of high entropy alloys from phase diagram calculations
Zhang, F., Zhang, C., Chen, S. L., Zhu, J., Cao, W. S., & Kattner, U. R. (2014) · Calphad · doi:10.1016/j.calphad.2013.10.006 · Cited by 395
X-ray reflexions from dilute solid solutions
Huang, K. (1947) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1947.0064 · Cited by 249
Local Atomic Structure of a High-Entropy Alloy: An X-Ray and Neutron Scattering Study
Guo, W., Dmowski, W., Noh, J.-Y., Rack, P., Liaw, P. K., & Egami, T. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1474-0 · Cited by 225
Atomic packing efficiency and phase transition in a high entropy alloy
Wang, F. J., Zhang, Y., & Chen, G. L. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.11.059 · Cited by 214
Lattice dynamics and correlated atomic motion from the atomic pair distribution function
Jeong, I.-K., Heffner, R. H., Graf, M. J., & Billinge, S. J. L. (2003) · Physical Review B · doi:10.1103/physrevb.67.104301 · Cited by 185
Cited by
A review on fundamental of high entropy alloys with promising high–temperature properties
Chen, J., Zhou, X., Wang, W., Liu, B., Lv, Y., Yang, W., Xu, D., & Liu, Y. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.05.067 · Cited by 919
Phase Engineering of High‐Entropy Alloys
Chang, X., Zeng, M., Liu, K., & Fu, L. (2020) · Advanced Materials · doi:10.1002/adma.201907226 · Cited by 464
Local Structure and Short-Range Order in a NiCoCr Solid Solution Alloy
Zhang, F. X., Zhao, S., Jin, K., Xue, H., Velisa, G., Bei, H., Huang, R., Ko, J. Y. P., Pagan, D. C., Neuefeind, J. C., et al. (2017) · Physical Review Letters · doi:10.1103/physrevlett.118.205501 · Cited by 451
Chen, S., Oh, H. S., Gludovatz, B., Kim, S. J., Park, E. S., Zhang, Z., Ritchie, R. O., & Yu, Q. (2020) · Nature Communications · doi:10.1038/s41467-020-14641-1 · Cited by 424
Ma, Y., Wang, Q., Jiang, B. B., Li, C. L., Hao, J. M., Li, X. N., Dong, C., & Nieh, T. G. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.01.050 · Cited by 410
Metadata
- Authors
- Owen, L. R., Pickering, E. J., Playford, H. Y., Stone, H. J., Tucker, M. G., & Jones, N. G.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2017-01
- Volume
- 122
- Pages
- 11-18
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2524096284
- Cited by
- 338
- References
- 26
- FWCI
- 23.61
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.