The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches
Open accessAbstract
The compression behavior of hollow architectured structures obtained by additive manufacturing was investigated in this work. Two face-centered cubic structures with the same shape and repetitive pattern but different struts and nodes thicknesses were produced using the selective laser melting (SLM) technique. Deformation of the structures under compression was imaged by in-situ and ex-situ X-ray tomography scanning. The initial state of the structure was scanned using the stitching tomography method to capture detailed 3D images illustrating both the macroscopic hollow structure and local microporosity in the nodes and struts. A 3D image-based conformal finite element model was then built for the simulation of the compression test using Gurson-Tvergaard-Needleman (GTN) porous plasticity and a new procedure allowing to inform the local porosity of each element directly from high resolution tomography. Simulations considering a homogeneous matrix with an average initial porosity everywhere were compared to the new heterogeneous model. A fairly good agreement was found between the heterogeneous model and experiments especially in the prediction of fracture location.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fiji: an open-source platform for biological-image analysis
Schindelin, J., Arganda-Carreras, I., Frise, E., Kaynig, V., Longair, M., Pietzsch, T., Preibisch, S., Rueden, C., Saalfeld, S., Schmid, B., et al. (2012) · Nature Methods · doi:10.1038/nmeth.2019 · Cited by 66,890
Cited by
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
State-of-the-art of selective laser melting process: A comprehensive review
Sefene, E. M. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.04.002 · Cited by 429
Lei, H., Li, C., Meng, J., Zhou, H., Liu, Y., Zhang, X., Wang, P., & Fang, D. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107685 · Cited by 331
Metadata
- Authors
- Amani, Y., Dancette, S., Delroisse, P., Simar, A., & Maire, E.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 159
- Pages
- 395-407
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2888385850
- Cited by
- 240
- References
- 1
- FWCI
- 14.07
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.