The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.
Lattice distortion in a strong and ductile refractory high-entropy alloy
Open accessAbstract
The maximization of the mixing entropy with the optimal range of enthalpy in high-entropy alloys (HEAs) can promote the formation of a stable single solid-solution phase with the absence of competing intermetallic compounds. The resultant effects, such as lattice distortion, can contribute to excellent mechanical properties, which has motivated numerous efforts to develop and design single-phase HEAs. However, challenges still remain, particularly on quantifying the lattice distortion and relating it to materials properties. In this study, we have developed a NbTaTiV refractory HEA with a single body-centered-cubic (BCC) structure using an integrated experimental and theoretical approach. The theoretical efforts include thermodynamic modeling, i.e., CALculation of PHAse Diagram (CALPHAD). The microstructural evolutions have been investigated by systematic heat-treatment processes. The typical dendrite microstructure was observed, which is caused by the elemental segregation during the solidification in the as-cast condition. The structural inhomogeneity and chemical segregation were completely eliminated by the proper homogenization treatment at 1200 °C for 3 days. The homogeneous elemental distribution was quantitatively verified by the Atom Probe Tomography (APT) technique. Importantly, results indicate that this HEA exhibits the high yield strength and ductility at both room and high temperatures (up to 900 °C). Furthermore, the effects of the high mixing entropy on the mechanical properties are discussed and quantified in terms of lattice distortions and interatomic interactions of the NbTaTiV HEA via first-principles calculations. It is found that the local severe lattice distortions are induced, due to the atomic interactions and atomic-size mismatch in the homogenization-treated NbTaTiV refractory HEA.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Special points for Brillouin-zone integrations
Monkhorst, H. J., & Pack, J. D. (1976) · Physical Review B · doi:10.1103/physrevb.13.5188 · Cited by 71,721
NIH Image to ImageJ: 25 years of image analysis
Schneider, C. A., Rasband, W. S., & Eliceiri, K. W. (2012) · Nature Methods · doi:10.1038/nmeth.2089 · Cited by 64,638
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Improved tetrahedron method for Brillouin-zone integrations
Blöchl, P. E., Jepsen, O., & Andersen, O. K. (1994) · Physical Review B · doi:10.1103/physrevb.49.16223 · Cited by 7,297
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Self-citationA fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Special quasirandom structures
Zunger, A., Wei, S.-H., Ferreira, L. G., & Bernard, J. E. (1990) · Physical Review Letters · doi:10.1103/physrevlett.65.353 · Cited by 3,935
Solid‐Solution Phase Formation Rules for Multi‐component Alloys
Zhang, Y., Zhou, Y. J., Lin, J. P., Chen, G. L., & Liaw, P. K. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700240 · Cited by 3,466
Self-citationOtto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
The Thermo-Calc databank system
Sundman, B., Jansson, B., & Andersson, J.-O. (1985) · Calphad · doi:10.1016/0364-5916(85)90021-5 · Cited by 3,343
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Refractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,950
Self-citationPhase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase
GUO, S., & LIU, C. T. (2011) · Progress in Natural Science: Materials International · doi:10.1016/s1002-0071(12)60080-x · Cited by 2,534
Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
Tsai, K.-Y., Tsai, M.-H., & Yeh, J.-W. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.058 · Cited by 2,366
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
Gludovatz, B., Hohenwarter, A., Thurston, K. V. S., Bei, H., Wu, Z., George, E. P., & Ritchie, R. O. (2016) · Nature Communications · doi:10.1038/ncomms10602 · Cited by 1,930
Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Miracle, D. B., & Woodward, C. F. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.02.171 · Cited by 1,856
In situ site-specific specimen preparation for atom probe tomography
Thompson, K., Lawrence, D., Larson, D. J., Olson, J. D., Kelly, T. F., & Gorman, B. (2007) · Ultramicroscopy · doi:10.1016/j.ultramic.2006.06.008 · Cited by 1,719
Efficient stochastic generation of special quasirandom structures
van de Walle, A., Tiwary, P., de Jong, M., Olmsted, D. L., Asta, M., Dick, A., Shin, D., Wang, Y., Chen, L.-Q., & Liu, Z.-K. (2013) · Calphad · doi:10.1016/j.calphad.2013.06.006 · Cited by 1,648
Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
Otto, F., Yang, Y., Bei, H., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.042 · Cited by 1,445
A Statistical Theory of Solid Solution Hardening
Labusch, R. (1970) · physica status solidi (b) · doi:10.1002/pssb.19700410221 · Cited by 1,439
Substitutional solution hardening
Fleischer, R. L. (1963) · Acta Metallurgica · doi:10.1016/0001-6160(63)90213-x · Cited by 1,281
Yeh, J.-W., Lin, S.-J., Chin, T.-S., Gan, J.-Y., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chou, S.-Y. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0234-4 · Cited by 1,252
Otto, F., Dlouhý, A., Pradeep, K. G., Kuběnová, M., Raabe, D., Eggeler, G., & George, E. P. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.005 · Cited by 932
Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Meisenkothen, F., Miracle, D. B., & Woodward, C. F. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6260-2 · Cited by 916
Mechanical performance of the Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements
Tong, C.-J., Chen, M.-R., Yeh, J.-W., Lin, S.-J., Chen, S.-K., Shun, T.-T., & Chang, S.-Y. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0218-9 · Cited by 904
Accelerated exploration of multi-principal element alloys with solid solution phases
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Nature Communications · doi:10.1038/ncomms7529 · Cited by 871
Design of a twinning-induced plasticity high entropy alloy
Deng, Y., Tasan, C. C., Pradeep, K. G., Springer, H., Kostka, A., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.04.014 · Cited by 861
Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys
Senkov, O. N., Senkova, S. V., & Woodward, C. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.01.029 · Cited by 857
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
Zhang, Z., Mao, M. M., Wang, J., Gludovatz, B., Zhang, Z., Mao, S. X., George, E. P., Yu, Q., & Ritchie, R. O. (2015) · Nature Communications · doi:10.1038/ncomms10143 · Cited by 845
Ungár, T., Gubicza, J., Ribárik, G., & Borbély, A. (2001) · Journal of Applied Crystallography · doi:10.1107/s0021889801003715 · Cited by 789
Li, Z., Tasan, C. C., Pradeep, K. G., & Raabe, D. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.03.069 · Cited by 757
Yeh, J.-W., Chang, S.-Y., Hong, Y.-D., Chen, S.-K., & Lin, S.-J. (2007) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2007.01.003 · Cited by 742
Santodonato, L. J., Zhang, Y., Feygenson, M., Parish, C. M., Gao, M. C., Weber, R. J. K., Neuefeind, J. C., Tang, Z., & Liaw, P. K. (2015) · Nature Communications · doi:10.1038/ncomms6964 · Cited by 708
Self-citationYao, M. J., Pradeep, K. G., Tasan, C. C., & Raabe, D. (2014) · Scripta Materialia · doi:10.1016/j.scriptamat.2013.09.030 · Cited by 685
Youssef, K. M., Zaddach, A. J., Niu, C., Irving, D. L., & Koch, C. C. (2015) · Materials Research Letters · doi:10.1080/21663831.2014.985855 · Cited by 645
Ultrastrong ductile and stable high-entropy alloys at small scales
Zou, Y., Ma, H., & Spolenak, R. (2015) · Nature Communications · doi:10.1038/ncomms8748 · Cited by 634
Wu, Y. D., Cai, Y. H., Wang, T., Si, J. J., Zhu, J., Wang, Y. D., & Hui, X. D. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.05.134 · Cited by 610
Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy
Huang, S., Li, W., Lu, S., Tian, F., Shen, J., Holmström, E., & Vitos, L. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.05.041 · Cited by 583
High-Entropy Alloys: Fundamentals and Applications
Gao (2016) · Cited by 561
Mechanical properties of refractory high-entropy alloys: Experiments and modeling
Yao, H. W., Qiao, J. W., Hawk, J. A., Zhou, H. F., Chen, M. W., & Gao, M. C. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.11.188 · Cited by 528
Self-citationMechanism of Radiation Damage Reduction in Equiatomic Multicomponent Single Phase Alloys
Granberg, F., Nordlund, K., Ullah, M. W., Jin, K., Lu, C., Bei, H., Wang, L. M., Djurabekova, F., Weber, W. J., & Zhang, Y. (2016) · Physical Review Letters · doi:10.1103/physrevlett.116.135504 · Cited by 500
Li, Z., Tasan, C. C., Springer, H., Gault, B., & Raabe, D. (2017) · Scientific Reports · doi:10.1038/srep40704 · Cited by 488
Jo, Y. H., Jung, S., Choi, W. M., Sohn, S. S., Kim, H. S., Lee, B. J., Kim, N. J., & Lee, S. (2017) · Nature Communications · doi:10.1038/ncomms15719 · Cited by 470
Criteria for Predicting the Formation of Single-Phase High-Entropy Alloys
Troparevsky, M. C., Morris, J. R., Kent, P. R. C., Lupini, A. R., & Stocks, G. M. (2015) · Physical Review X · doi:10.1103/physrevx.5.011041 · Cited by 414
An understanding of high entropy alloys from phase diagram calculations
Zhang, F., Zhang, C., Chen, S. L., Zhu, J., Cao, W. S., & Kattner, U. R. (2014) · Calphad · doi:10.1016/j.calphad.2013.10.006 · Cited by 395
Searching for Next Single-Phase High-Entropy Alloy Compositions
Gao, M., & Alman, D. (2013) · Entropy · doi:10.3390/e15104504 · Cited by 349
Self-citationMaiti, S., & Steurer, W. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.01.018 · Cited by 331
Radiation-induced segregation on defect clusters in single-phase concentrated solid-solution alloys
Lu, C., Yang, T., Jin, K., Gao, N., Xiu, P., Zhang, Y., Gao, F., Bei, H., Weber, W. J., Sun, K., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.01.019 · Cited by 316
Design of Light-Weight High-Entropy Alloys
Feng, R., Gao, M., Lee, C., Mathes, M., Zuo, T., Chen, S., Hawk, J., Zhang, Y., & Liaw, P. (2016) · Entropy · doi:10.3390/e18090333 · Cited by 290
Self-citationMoody, M. P., Stephenson, L. T., Ceguerra, A. V., & Ringer, S. P. (2008) · Microscopy Research and Technique · doi:10.1002/jemt.20582 · Cited by 243
Local Atomic Structure of a High-Entropy Alloy: An X-Ray and Neutron Scattering Study
Guo, W., Dmowski, W., Noh, J.-Y., Rack, P., Liaw, P. K., & Egami, T. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1474-0 · Cited by 225
Self-citationHigh-Entropy Alloys in Hexagonal Close-Packed Structure
Gao, M. C., Zhang, B., Guo, S. M., Qiao, J. W., & Hawk, J. A. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3091-1 · Cited by 221
Self-citationA geometric model for intrinsic residual strain and phase stability in high entropy alloys
Ye, Y. F., Liu, C. T., & Yang, Y. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.04.051 · Cited by 205
Design of Refractory High-Entropy Alloys
Gao, M. C., Carney, C. S., Doğan, Ö. N., Jablonksi, P. D., Hawk, J. A., & Alman, D. E. (2015) · JOM · doi:10.1007/s11837-015-1617-z · Cited by 201
Self-citationStepanov, N., Yurchenko, N., Shaysultanov, D. G., Salishchev, G. A., & Tikhonovsky, М. А. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000032 · Cited by 159
Zherebtsov, S. V., Salishchev, G. A., Galeyev, R. M., & MAEKAWA, K. (2005) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.46.2020 · Cited by 125
Cited by
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Clarifying the four core effects of high-entropy materials
Hsu, W.-L., Tsai, C.-W., Yeh, A.-C., & Yeh, J.-W. (2024) · Nature Reviews Chemistry · doi:10.1038/s41570-024-00602-5 · Cited by 928
Phase Engineering of High‐Entropy Alloys
Chang, X., Zeng, M., Liu, K., & Fu, L. (2020) · Advanced Materials · doi:10.1002/adma.201907226 · Cited by 464
Chen, S., Oh, H. S., Gludovatz, B., Kim, S. J., Park, E. S., Zhang, Z., Ritchie, R. O., & Yu, Q. (2020) · Nature Communications · doi:10.1038/s41467-020-14641-1 · Cited by 424
Yin, S., Zuo, Y., Abu-Odeh, A., Zheng, H., Li, X.-G., Ding, J., Ong, S. P., Asta, M., & Ritchie, R. O. (2021) · Nature Communications · doi:10.1038/s41467-021-25134-0 · Cited by 398
Metadata
- Authors
- Lee, C., Song, G., Gao, M. C., Feng, R., Chen, P., Brechtl, J., Chen, Y., An, K., Guo, W., Poplawsky, J. D., Li, S., Samaei, A. T., Chen, W., Hu, A., Choo, H., & Liaw, P. K.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 160
- Pages
- 158-172
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2889241664
- Cited by
- 622
- References
- 61
- FWCI
- 24.14
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.