The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure
Open accessAbstract
The improvement in strength is usually accompanied by ductility loss in structural materials, which is a long-standing conflict referred as the strength-ductility trade-off. Here we present a heterogeneous-structures-architecting strategy, in which we design bulk high-entropy alloys with the largely-enhanced strength-ductility trade-off, possessing a yield strength of 711 MPa, a tensile strength of 928 MPa, and a uniform elongation of 30.3%. Such an enhancement of the strength-ductility trade-off is due to the microstructure comprised with a combination of the non-recrystallized and recrystallized grains arranged in complex heterogeneous structures with a characteristic dimension spanning from the submicron scale to the coarse-sized scale. The heterogeneous structures in the high-entropy alloy are produced by cold-rolling, followed by intermediate-temperature-annealing. Our results demonstrate that heterogeneous designs can be accomplished effectively by simple thermal treatments, which offer a design strategy towards a new generation of high-strength and high-ductility high-entropy alloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
Hirth, J. P., & Lothe, J. (1968) · Medical Entomology and Zoology · Cited by 9,770
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Recrystallization and Related Annealing Phenomena
(2004) · Elsevier eBooks · doi:10.1016/b978-0-08-044164-1.x5000-2 · Cited by 7,407
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Self-citationA fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
High-entropy alloy: challenges and prospects
Ye, Y. F., Wang, Q., Lu, J., Liu, C. T., & Yang, Y. (2016) · Materials Today · doi:10.1016/j.mattod.2015.11.026 · Cited by 3,016
Self-citationHigh tensile ductility in a nanostructured metal
Wang, Y., Chen, M., Zhou, F., & Ma, E. (2002) · Nature · doi:10.1038/nature01133 · Cited by 2,945
Materials Selection in Mechanical Design
(2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,679
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
Wu, X., Yang, M., Yuan, F., Wu, G., Wei, Y., Huang, X., & Zhu, Y. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1517193112 · Cited by 2,017
Processing bulk natural wood into a high-performance structural material
Song, J., Chen, C., Zhu, S., Zhu, M., Dai, J., Ray, U., Li, Y., Kuang, Y., Li, Y., Quispe, N., et al. (2018) · Nature · doi:10.1038/nature25476 · Cited by 1,632
Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys
Chuang, M.-H., Tsai, M.-H., Wang, W.-R., Lin, S.-J., & Yeh, J.-W. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.06.041 · Cited by 1,481
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
Jiang, S., Wang, H., Wu, Y., Liu, X., Chen, H., Yao, M., Gault, B., Ponge, D., Raabe, D., Hirata, A., et al. (2017) · Nature · doi:10.1038/nature22032 · Cited by 1,441
Schuh, B., Mendez-Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R., & Hohenwarter, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.025 · Cited by 1,323
Extraordinary strain hardening by gradient structure
Wu, X., Jiang, P., Chen, L., Yuan, F., & Zhu, Y. T. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1324069111 · Cited by 1,315
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
Laplanche, G., Kostka, A., Horst, O. M., Eggeler, G., & George, E. P. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.038 · Cited by 1,198
Making strong nanomaterials ductile with gradients
Lu, K. (2014) · Science · doi:10.1126/science.1255940 · Cited by 1,173
Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility
Liu, G., Zhang, G., Jiang, F., et al. (2013) · Nature Materials · doi:10.1038/nmat3544 · Cited by 1,122
Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins
Wei, Y., Li, Y., Zhu, L., Liu, Y., Lei, X., Wang, G., Wu, Y., Mi, Z., Liu, J., Wang, H., et al. (2014) · Nature Communications · doi:10.1038/ncomms4580 · Cited by 1,109
Self-citationGrain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy
Liu, W. H., Wu, Y., He, J. Y., Nieh, T. G., & Lu, Z. P. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.12.002 · Cited by 916
Accelerated exploration of multi-principal element alloys with solid solution phases
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Nature Communications · doi:10.1038/ncomms7529 · Cited by 871
Design of a twinning-induced plasticity high entropy alloy
Deng, Y., Tasan, C. C., Pradeep, K. G., Springer, H., Kostka, A., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.04.014 · Cited by 861
Brittle intermetallic compound makes ultrastrong low-density steel with large ductility
Kim, S.-H., Kim, H., & Kim, N. J. (2015) · Nature · doi:10.1038/nature14144 · Cited by 830
Lu, C., Niu, L., Chen, N., Jin, K., Yang, T., Xiu, P., Zhang, Y., Gao, F., Bei, H., Shi, S., et al. (2016) · Nature Communications · doi:10.1038/ncomms13564 · Cited by 822
Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys
Hemphill, M. A., Yuan, T., Wang, G. Y., Yeh, J. W., Tsai, C. W., Chuang, A., & Liaw, P. K. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.06.046 · Cited by 811
Self-citationPhase‐Transformation Ductilization of Brittle High‐Entropy Alloys via Metastability Engineering
Huang, H., Wu, Y., He, J., Wang, H., Liu, X., An, K., Wu, W., & Lu, Z. (2017) · Advanced Materials · doi:10.1002/adma.201701678 · Cited by 705
Yao, M. J., Pradeep, K. G., Tasan, C. C., & Raabe, D. (2014) · Scripta Materialia · doi:10.1016/j.scriptamat.2013.09.030 · Cited by 685
Youssef, K. M., Zaddach, A. J., Niu, C., Irving, D. L., & Koch, C. C. (2015) · Materials Research Letters · doi:10.1080/21663831.2014.985855 · Cited by 645
High-Entropy Alloys: Fundamentals and Applications
Gao (2016) · Cited by 561
Yang, M., Yan, D., Yuan, F., Jiang, P., Ma, E., & Wu, X. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1807817115 · Cited by 548
Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy
Bhattacharjee, P. P., Sathiaraj, G. D., Zaid, M., Gatti, J. R., Lee, C., Tsai, C.-W., & Yeh, J.-W. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.10.237 · Cited by 530
Jo, Y. H., Jung, S., Choi, W. M., Sohn, S. S., Kim, H. S., Lee, B. J., Kim, N. J., & Lee, S. (2017) · Nature Communications · doi:10.1038/ncomms15719 · Cited by 470
Sun, S. J., Tian, Y. Z., Lin, H. R., Dong, X. G., Wang, Y. H., Zhang, Z. J., & Zhang, Z. F. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.07.054 · Cited by 469
Fatigue behavior of a wrought Al0.5CoCrCuFeNi two-phase high-entropy alloy
Tang, Z., Yuan, T., Tsai, C.-W., Yeh, J.-W., Lundin, C. D., & Liaw, P. K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.004 · Cited by 450
Self-citationBone-like crack resistance in hierarchical metastable nanolaminate steels
Koyama, M., Zhang, Z., Wang, M., Ponge, D., Raabe, D., Tsuzaki, K., Noguchi, H., & Tasan, C. C. (2017) · Science · doi:10.1126/science.aal2766 · Cited by 413
Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys
Wu, Z., Parish, C. M., & Bei, H. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.05.224 · Cited by 358
Li, D., & Zhang, Y. (2016) · Intermetallics · doi:10.1016/j.intermet.2015.11.002 · Cited by 346
Otto, F., Hanold, N. L., & George, E. P. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.05.014 · Cited by 322
Design of Light-Weight High-Entropy Alloys
Feng, R., Gao, M., Lee, C., Mathes, M., Zuo, T., Chen, S., Hawk, J., Zhang, Y., & Liaw, P. (2016) · Entropy · doi:10.3390/e18090333 · Cited by 290
Self-citationHigh‐Strength and High‐Ductility Nanostructured and Amorphous Metallic Materials
Kou, H., Lu, J., & Li, Y. (2014) · Advanced Materials · doi:10.1002/adma.201401595 · Cited by 283
Tensile properties of low-stacking fault energy high-entropy alloys
Zaddach, A. J., Scattergood, R. O., & Koch, C. C. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.03.109 · Cited by 278
Nanocrystalline High-Entropy Alloys: A New Paradigm in High-Temperature Strength and Stability
Zou, Y., Wheeler, J. M., Ma, H., Okle, P., & Spolenak, R. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04716 · Cited by 215
Strong grain-size effect on deformation twinning of an Al0.1CoCrFeNi high-entropy alloy
Wu, S. W., Wang, G., Yi, J., Jia, Y. D., Hussain, I., Zhai, Q. J., & Liaw, P. K. (2017) · Materials Research Letters · doi:10.1080/21663831.2016.1257514 · Cited by 207
Self-citationTasan, C. C., Deng, Y., Pradeep, K. G., Yao, M. J., Springer, H., & Raabe, D. (2014) · JOM · doi:10.1007/s11837-014-1133-6 · Cited by 185
Slip nucleation in single crystal FeNiCoCrMn high entropy alloy
Patriarca, L., Ojha, A., Şehitoğlu, H., & Chumlyakov, Y. I. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.09.009 · Cited by 155
Mixed-up metals make for stronger, tougher, stretchier alloys
Lim, X. (2016) · Nature · doi:10.1038/533306a · Cited by 109
Cited by
Zhu, Y., & Wu, X. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101019 · Cited by 1,537
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
Li, X., Lu, L., Li, J., Zhang, X., & Gao, H. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0212-2 · Cited by 846
High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties
Sathiyamoorthi, P., & Kim, H. S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100709 · Cited by 766
Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy
Ma, E., & Wu, X. (2019) · Nature Communications · doi:10.1038/s41467-019-13311-1 · Cited by 621
Du, X. H., Li, W. P., Chang, H. T., Yang, T., Duan, G. S., Wu, B. L., Huang, J. C., Chen, F. R., Liu, C. T., Chuang, W. S., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-16085-z · Cited by 558
Self-citation
Metadata
- Authors
- Wu, S. W., Wang, G., Wang, Q., Jia, Y. D., Yi, J., Zhai, Q. J., Liu, J. B., Sun, B. A., Chu, H. J., Shen, J., Liaw, P. K., Liu, C. T., & Zhang, T. Y.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 165
- Pages
- 444-458
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2905010350
- Cited by
- 640
- References
- 54
- FWCI
- 20.79
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.