The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
First-principles study, fabrication and characterization of (Zr0.25Nb0.25Ti0.25V0.25)C high-entropy ceramics
Open accessAbstract
The formation possibility of a new (Zr0.25Nb0.25Ti0.25V0.25)C high-entropy ceramics (ZHC-1) was first analyzed by the first-principles calculations and thermodynamical analysis and then it was successfully fabricated by hot pressing sintering technique. The first-principles calculation results showed that the mixing enthalpy of ZHC-1 was 5.526 kJ/mol and the mixing entropy of ZHC-1 was in the range of 0.693R–1.040R. The thermodynamical analysis results showed that ZHC-1 was thermodynamically stable above 959 K owing to its negative mixing Gibbs free energy. The experimental results showed that the as-prepared ZHC-1 (95.1% relative density) possessed a single rock-salt crystal structure, some interesting nanoplate-like structures, and high compositional uniformity from nanoscale to microscale. By taking advantage of these unique features, compared with the initial metal carbides (ZrC, NbC, TiC and VC), it showed a relatively low thermal conductivity of 15.3 ± 0.3 W/(m⋅K) at room temperature, which was due to the presence of solid solution effects, nanoplates and porosity. Meanwhile, it exhibited the relatively high nanohardness of 30.3 ± 0.7 GPa and elastic modulus of 460.4 ± 19.2 GPa and the higher fracture toughness of 4.7 ± 0.5 MPa m1/2, which were attributed to the solid solution strengthening mechanism and nanoplate pullout and microcrack deflection toughening mechanism.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Special points for Brillouin-zone integrations
Monkhorst, H. J., & Pack, J. D. (1976) · Physical Review B · doi:10.1103/physrevb.13.5188 · Cited by 71,721
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Physical Properties of Crystals
(2007) · Materials Today · doi:10.1016/s1369-7021(07)70138-4 · Cited by 7,769
Anstis, G. R., Chantikul, P., Lawn, B. R., & Marshall, D. B. (1981) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1981.tb10320.x · Cited by 5,653
Flash Method of Determining Thermal Diffusivity, Heat Capacity, and Thermal Conductivity
Parker, W. J., Jenkins, R. J., Butler, C. P., & Abbott, G. L. (1961) · Journal of Applied Physics · doi:10.1063/1.1728417 · Cited by 3,978
Special quasirandom structures
Zunger, A., Wei, S.-H., Ferreira, L. G., & Bernard, J. E. (1990) · Physical Review Letters · doi:10.1103/physrevlett.65.353 · Cited by 3,935
Die Konstitution der Mischkristalle und die Raumf�llung der Atome
Vegard, L. (1921) · Zeitschrift f�r Physik · doi:10.1007/bf01349680 · Cited by 3,890
Rost, C. M., Sachet, E., Borman, T., Moballegh, A., Dickey, E. C., Hou, D., Jones, J. L., Curtarolo, S., & Maria, J.-P. (2015) · Nature Communications · doi:10.1038/ncomms9485 · Cited by 3,525
Physical properties of crystals
(2005) · Group Theory with Applications in Chemical Physics · doi:10.1017/cbo9780511535390.017 · Cited by 1,865
Le Page, Y., & Saxe, P. (2002) · Physical Review B · doi:10.1103/physrevb.65.104104 · Cited by 1,373
Gild, J., Zhang, Y., Harrington, T., Jiang, S., Hu, T., Quinn, M. C., Mellor, W. M., Zhou, N., Vecchio, K., & Luo, J. (2016) · Scientific Reports · doi:10.1038/srep37946 · Cited by 1,241
Bass, S. D. (1999) · The European Physical Journal A · doi:10.1007/s100500050252 · Cited by 1,183
Effect of Point Imperfections on Lattice Thermal Conductivity
Callaway, J., & von Baeyer, H. C. (1960) · Physical Review · doi:10.1103/physrev.120.1149 · Cited by 1,168
The Chemistry of Transition Metal Carbides and Nitrides
(1996) · Springer eBooks · doi:10.1007/978-94-009-1565-7 · Cited by 1,144
High-entropy high-hardness metal carbides discovered by entropy descriptors
Sarker, P., Harrington, T., Toher, C., Oses, C., Samiee, M., Maria, J.-P., Brenner, D. W., Vecchio, K. S., & Curtarolo, S. (2018) · Nature Communications · doi:10.1038/s41467-018-07160-7 · Cited by 1,082
van de Walle, A. (2009) · Calphad · doi:10.1016/j.calphad.2008.12.005 · Cited by 1,000
Pierson, H. O. (1996) · Cited by 981
A new class of high-entropy perovskite oxides
Jiang, S., Hu, T., Gild, J., Zhou, N., Nie, J., Qin, M., Harrington, T., Vecchio, K., & Luo, J. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.08.040 · Cited by 962
Ceramic materials: science and engineering
Carter, C. B., & Norton, M. G. (2007) · Choice Reviews Online · doi:10.5860/choice.45-0895 · Cited by 899
Processing and Properties of High-Entropy Ultra-High Temperature Carbides
Castle, E., Csanádi, T., Grasso, S., Dusza, J., & Reece, M. (2018) · Scientific Reports · doi:10.1038/s41598-018-26827-1 · Cited by 873
Phase stability and mechanical properties of novel high entropy transition metal carbides
Harrington, T. J., Gild, J., Sarker, P., Toher, C., Rost, C. M., Dippo, O. F., McElfresh, C., Kaufmann, K., Marin, E., Borowski, L., et al. (2019) · Acta Materialia · doi:10.1016/j.actamat.2018.12.054 · Cited by 737
Thermal Resistance due to Point Defects at High Temperatures
Klemens, P. G. (1960) · Physical Review · doi:10.1103/physrev.119.507 · Cited by 714
Gild, J., Samiee, M., Braun, J. L., Harrington, T., Vega, H., Hopkins, P. E., Vecchio, K., & Luo, J. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.04.010 · Cited by 636
(Hf 0.2 Zr 0.2 Ta 0.2 Nb 0.2 Ti 0.2 )C high‐entropy ceramics with low thermal conductivity
Yan, X., Constantin, L., Lu, Y., Silvain, J., Nastasi, M., & Cui, B. (2018) · Journal of the American Ceramic Society · doi:10.1111/jace.15779 · Cited by 614
Mechanochemical‐Assisted Synthesis of High‐Entropy Metal Nitride via a Soft Urea Strategy
Jin, T., Sang, X., Unocic, R. R., Kinch, R. T., Liu, X., Hu, J., Liu, H., & Dai, S. (2018) · Advanced Materials · doi:10.1002/adma.201707512 · Cited by 539
Theory of bonding in transition-metal carbides and nitrides
Häglund, J., Fernández Guillermet, A., Grimvall, G., & Körling, M. (1993) · Physical Review B · doi:10.1103/physrevb.48.11685 · Cited by 512
Note on the thermodynamic interpretation of paramagnetic relaxation phenomena
Casimir, H. B. G., & du Pré, F. K. (1938) · Physica · doi:10.1016/s0031-8914(38)80164-6 · Cited by 412
Ye, B., Wen, T., Huang, K., Wang, C., & Chu, Y. (2019) · Journal of the American Ceramic Society · doi:10.1111/jace.16295 · Cited by 389
Self-citationPhase stability and distortion in high-entropy oxides
Anand, G., Wynn, A. P., Handley, C. M., & Freeman, C. L. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.12.037 · Cited by 285
Microstructure of (Hf-Ta-Zr-Nb)C high-entropy carbide at micro and nano/atomic level
Dusza, J., Švec, P., Girman, V., Sedlák, R., Castle, E. G., Csanádi, T., Kovalčíková, A., & Reece, M. J. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.05.006 · Cited by 234
High-entropy ceramic thin films; A case study on transition metal diborides
Mayrhofer, P. H., Kirnbauer, A., Ertelthaler, P., & Koller, C. M. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.02.008 · Cited by 218
Lu, X., Selleby, M., & Sundman, B. (2006) · Acta Materialia · doi:10.1016/j.actamat.2006.05.054 · Cited by 191
Thermal conductivity of yttria-stabilized zirconia–hafnia solid solutions
Winter, M. R., & Clarke, D. R. (2006) · Acta Materialia · doi:10.1016/j.actamat.2006.06.038 · Cited by 165
Yang, Y., Wang, W., Gan, G., Shi, X.-F., & Tang, B. (2018) · Physica B Condensed Matter · doi:10.1016/j.physb.2018.09.014 · Cited by 122
Rogal, Ł., Bobrowski, P., Körmann, F., Divinski, S. V., Stein, F., & Grabowski, B. (2017) · Scientific Reports · doi:10.1038/s41598-017-02385-w · Cited by 106
Wu, Z., Troparevsky, M. C., Gao, Y., Morris, J. R., Stocks, G. M., & Bei, H. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2017.07.001 · Cited by 105
Synthesis and phase separation of (Ti,Zr)C
Borgh, I., Hedström, P., Blomqvist, A., Ågren, J., & Odqvist, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.11.074 · Cited by 72
Cited by
Oses, C., Toher, C., & Curtarolo, S. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0170-8 · Cited by 2,081
High-entropy ceramics: Present status, challenges, and a look forward
Xiang, H., Xing, Y., Dai, F.-Z., Wang, H., Su, L., Miao, L., Zhang, G., Wang, Y., Qi, X., Yao, L., et al. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0477-y · Cited by 1,109
High-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
Review of high entropy ceramics: design, synthesis, structure and properties
Zhang, R.-Z., & Reece, M. J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05698j · Cited by 760
Recent progress of high-entropy materials for energy storage and conversion
Amiri, A., & Shahbazian-Yassar, R. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta09578h · Cited by 592
Metadata
- Authors
- Ye, B., Wen, T., Nguyen, M. C., Hao, L., Wang, C.-Z., & Chu, Y.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 170
- Pages
- 15-23
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2916942491
- Cited by
- 548
- References
- 41
- FWCI
- 27.83
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.