The DOI matches its Crossref record.
Quantitative prediction of texture effect on Hall–Petch slope for magnesium alloys
Abstract
The high texture dependence of a Hall–Petch slope (k) for Mg alloys has been frequently reported. Several important equations used to calculate k have been previously developed, and although they seem to work well for fcc and bcc materials, they often fail to predict the highly texture-dependent k in Mg alloys. A new equation based on the dislocation pile-up model was developed in this study. The validity of this new equation was tested through a comparison of the predicted k values with the experimental values as well as the calculations from older equations. The results indicate that the new equation can achieve an accurate prediction for several previously reported texture effects on k, whereas the k values predicted by the older equations often exhibit a clear deviation. The reasons for this were analyzed and discussed. The strong deformation anisotropy for Mg alloys leads to a complex texture effect on k, including the effects from both external and internal stresses. Both effects are well expressed in the new equation. In contrast, the old equations consider the external stress effect, but do not express well the internal stress effect. In addition, the old equations consider only the predominant deformation mode. However, our results indicate that the activation of a portion of another deformation mode other than the predominant one plays an important role in the k value. In the new equation, all possible deformation modes and their fractions are considered in the calculation. Using the important parameters of the new equation, the mechanisms for several texture effects on k as previously reported were discussed and new understandings were obtained.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Grain refinement of magnesium alloys by dynamic recrystallization (DRX): A review
Mirzadeh, H. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.07.150 · Cited by 354
Evading strength-corrosion tradeoff in Mg alloys via dense ultrafine twins
Yan, C., Xin, Y., Chen, X.-B., Xu, D., Chu, P. K., Liu, C., Guan, B., Huang, X., & Liu, Q. (2021) · Nature Communications · doi:10.1038/s41467-021-24939-3 · Cited by 306
Self-citationWang, Z., Liu, B., Yin, B., Zheng, Y., Tian, Y., & Wen, P. (2022) · Frontiers in Chemistry · doi:10.3389/fchem.2022.1066103 · Cited by 30
“refinement of the L-PBF specimens; therefore, the material strength substantially increases according to the Hall-Petch slope equation (Guan et al., 2019).”
Method
Metadata
- Authors
- Guan, B., Xin, Y., Huang, X., Wu, P., & Liu, Q.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 173
- Pages
- 142-152
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2944524129
- Cited by
- 227
- References
- 0
- FWCI
- 4.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Quantitative prediction of texture effect on Hall–Petch slope for magnesium alloys. https://app.cochat.ai/papers/10.1016/j.actamat.2019.05.016
- The paper
- Guan, B., Xin, Y., Huang, X., Wu, P., & Liu, Q. (2019). Quantitative prediction of texture effect on Hall–Petch slope for magnesium alloys. Acta Materialia. https://doi.org/10.1016/j.actamat.2019.05.016
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.